60 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
7
This trailer was built for a lightweight clubman kitcar and was used to carry the kitcar from Perth to Sydney and back. Suitable for a lightweight racecar under 900kg in weight or perhaps dirt bikes or an off road vehicle. Could also be repurposed as a camping trailer or even a food truck. It is fully road registered and way below its replacement cost. It has 3x alloy wheels and high quality Trojan Duratorque independent suspension. Currently has wood composite panels on the sides. Tare weight =
6
2024 built and complied, Stonegate 3 tonne Tandem car trailer. - Dual axle - Tilt tray with inbuilt ramps - 4 wheeled electric trailer braking - Brake away system - LED lights - Sealed, lockable toolbox - Winch post - Spare wheel - 2.1t carrying capacity - Registration to Jan 2025 Tows like a dream and good quality workmanship. Very quiet and well planted. Easy to load cars onto and mechanically new. You find a better quality trailer and options list, for this price!
3
Sydney Composites front splitter, used at WTAC in 2023 would suit either open class or Pro-Am, 2200mm wide and 810mm wide but can be reduced if required. Proven to produce massive down force with low drag. Titanium Wear Plates. Only selling due to changing direction. Happy to answer questions 0427700423 and can freight Austria wide
9
Registered until 18/08/2024 rego: 695UNG Beaver tail trailer for track/race cars Electric braking system Built in long slide out aluminium ramps for track/race cars (was able to load/unload 911 cup car without removing front splitter) Winch & battery system Raptor protective coat + additional coat of black paint Aluminium tool box with shelving & pull out aluminium drawer system Tyre rack + additional bolt on tyre rack to carry extra set Multi tie down floor system Size Overall size: 7m x
5
A Carbon Fiber rear three element wing for Hillclimb Time Attack cars. This wing has never been fitted to a car and is as new. I imported the wing from the UK at a cost of 5000GBP. The elements have hard points engineered into the structure for mounting and support. Main Element Length is 1720mm and cord is 300mm. Second element is 1720mm x 120mm and third element is 1720mm x 115mm. Each element can be adjusted or removed.
3
I have 19 available $40 each which is less the half price can post Australia wide
2
Porsche 996 997 Centre lock wheel travel nuts Can post Australia wide for $20
5
This car trailer is in near-new condition. Built in October 2021. Used to carry race car. 4.83m long and 2.0m wide at the tray. Wider and longer than usual. Has been stored inside my warehouse when not in use, never outdoors. Has extra shackle loops, manual winch and long ramps. Licensed and ready to use.
8
2017 NEVCO 3500kg ATM dual axle Ezy Approach trailer with 2050mm wide x 5330mm long rectangular deck, 4500lb 12V electric winch with remote plug-in access, LED work lights and deck lights. Also comes with very useful remote control for both raise/lower function and winch in and out. In excellent condition with everything fully functional and comes with custom cover for best protection when stored outdoors. This trailer is fully licensed and all inspections welcome, you won't be disappointed.
6
ADL2 Motec Dash Good Working Condition Supplied with new harness and connector as supplied by Motec QLD Also supplied with pinout sheet Brisbane
4
Australian made Trailer Very little use 880kg trailer mass, 2500kg GCM. Internal dimensions: 1970mm wide by 4600mm long Optional stainless steel tire rack with capacity to hold a full set of spare wheels and tires included. Optional 1200mm high stainless steel stone guard included. Respray by PBS Specialty Coatings in Toowoomba. Paint failing after 2 years and no use hence the discounted price. Fully sand blasted, undercoated with Macro680, top coated with DULUX TB510 in Gun Metal Kinet
2
Brand new still in box as it arrived from the US WYO Billet Lock Up Unit Includes Trans Dump Valves for air shifting gearbox Was planned to work with a 5 speed Liberty Cost $24,000 to land here from the US and they are more now Save $4,000 and 6 months wait!!
19
Tilta Trailer with some extensive modifications and factory extras. Super light trailer and tows like a dream! Will list details below: -2016 Tilta Trailer -Just been freshly serviced with brand new Timken bearings and new magnets for electric brakes all 6 tyres have been replaced in the past year. Factory options: -Wider tracks which makes loading a lot easier than the skinny ones they come with -2 x spare wheel carriers -2x Jerry Can Holders 1 not installed -Draw Bar Tool Box -Massive Belly
8
2024 Jakoma Trailers car trailer located in Port Kennedy Measurements: 5m total trailer length 2.02m deck width between guards Specs: 2 ton rated trailer 1300kg payload Full galvanized frame Heavy duty Alko jockey wheel Mechanical override brakes 8 tie down points LED light system Ramps included 5x 14x185 tyres on Sunraysia rims Ready for licencing 12 month structural warranty
33
Homemade 33' Gooseneck Car Trailer 3ton registered -8m lower bed length and 2.2m up top -2.5m wide -1.92m between wheel arches -Rated axle grouping of 4.5ton. -Tare weight of 1500kg -Trailer is very well made chassis is 6" x 2" 4mm wall (Welded by Qualified Boilermaker) -Additional 50mm x 6mm flat bar welded the entire length. -Also has an inner set of 4" x 2" rails that Cars would sit on that go the entire length of the trailer. -Chassis has been painted in 2 pack Black. -Entire trailer
9 1
Regretful SALE. Sadly it must go. Accepting REASONABLE Offers. Not Stupid ones like --------> $20,000 - $30,000 :-/ Rolls Royce of car trailers EZY APPROACH MODEL for CAR Carrying 3500kg ATM DUAL AXLE – 2000mm wide x 6000mm long deck Includes: VEHICLE ACCESS – HI RISE package. HI RISE Swing arm set up to allow vehicle access when loaded. HI RISE Drawbar fitted with Arc Xt700 jockey wheel for maneuverability. Large SINGLE level (c. 250 litre capacity storage unit) – fitted with interior
4
Hussla gloss black 19 x 8.5 front rims and 19 x 9.5 rear rims to fit commodore will not fit large brembo brake applications the frons are brand new the rear were only on the car for 3 weeks they are like new Cash only pick up only
3
MSD 7720,7730,,harness, coil all new Boxed
3
Haltech 950 with complete harness New in box
3
Holley 4150 950 cfm 4150. $900 Near new Aeromotive A2000 fuel pump_10 inlet - 8 outlet. $825.00 Aeromotive regulator with -10 fittings New trial fitting only