100 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
8
Isuzu FRR550 crew cab 11/02, 6HH1 non turbo, 6 speed ,a/c, p/s, air park brake, Air drivers seat. (Ex SES) Genuine 51000 kms Drives like new Great condition. No reg.
4
350 Fuel Injected Chev Engine, built as a project, only dyno time. Never installed to a car. 600BHP @7000. Autronic ECU & Harness, Miloden wet sump . SHP Dart 4 Bolt Block. Crower Crank. New parts include, NC'd Brodix Heads (1188106), stainless valves, Jessel Shaft Rockers, Brodix manifold (HV1814), CP Pistons & pins, Oliver 6" Rods, Isky roller cam 294: 302: 108. MSD dual Ignition 9:1 Comp ratio, tuned & mapped on 98 unleaded fuel. Very smooth & progressive. Ready to install. Ideal f
7
8.2 Deck height Bought as spare but never used Suitable for turbocharging or supercharging It takes a Cleveland crankshaft and Cleveland camshaft Comes with front timing cover
4
Race Simulator. Any car any Track, including rally. As new condition 3 x Screens. Sequential, Paddles and H Pattern Gears. Great fun Drive.
8
Tilton 800 series floor mounted pedal box c/w clutch, brake, throttle pedals. Pedal box is complete with 78 series spherical mounted brake master cylinders, and 76 series flange mounted clutch master cylinder. Is mounted to large alloy base and have cover to bolt over top of cylinders Comes with balance bar and adjusting cable Some options available, as have spare new cylinders, braided lines etc. Can discuss what is needed.
5
4 x Porsche Turbo cup wheels, phone Lee on 0419200201 for any information please.
2
I am looking for a new home in Perth, for our 4WD roller Dyno. I’m hoping to find a race team or workshop who was considering a dyno and have room for it to be set up (approx 8 x 5 mtrs) I will supply the dyno plus all the supporting equipment in exchange for some realestate to set it up under a shared custody arrangement. I am NOT interested in selling it even though this is a for sale ad. I am interested in connecting with people looking at buying or leasing a dyno to discuss this very rare o
1
Selling a set of K&A Engineering Double up safety stands to suit a Porsche 991 cup car, in excellent condition, like new!
6
Brand new never used Samsonas RS90 transmission with T10 adapter, clutch shaft, shifter, strain gauge for shift cut and temp sensor. 1400nm rated. Located Kilsyth Victoria, can ship nationally if required. Only selling as the vehicle build has changed direction and requires a H pattern. Price is plus GST.
10
Service truck. Build to fit in a 40 foot container. Has been used as rally service truck with large roof space for wheels or bumper etc. Good condition with WA rego. Loads of space with lots of shelving and 2 large tool cabinets. Lockers for Jacks, stands etc. Can also be sold with 40 foot container with tie down setup and bench that can also carry one car.
3
Perforated inner tube is top entry, bottom outlet. Small offset. 6" diameter case. 16" long. No spigots, 2 1/2" pipe slides into both ends then welded. $75 wholesale.
4
One only Challenger? alloy wheel. Zero curb rash. VGC. 14 x 7" on 4 3/4" pcd = HQ or Chev.
14
Here's one for the big guys! A Jordan Sparco brand race suit in a rarely available size of 62. This is from 2003 season when the Jordan raced with the Ford Cosworth and sported the classic Benson and Hedges sponsorship. I believe it was used by the jack man and I have included a photo of the team in action during a pit stop. I'd like to think that its my suit in the photo! But who knows. I bought it back in 2006 and used it a few times racing in the Vic State series....now its just hanging
1
Tr7/8 steel bonnet with steel air vents Immaculate condition
13
The Lock and Load Transport truck was professionally built by our rally team in 2018 and has only travelled a genuine 357k from new it has always been a Motorsport Transport truck. Serviced every 10k 6 new tyres that have done less than 5k it has long range fuel tanks fitted also driving lights mounted on a custom bullbar the airbag suspension and the radiator was replaced 12 months ago. Truck is a modern comfortably easy to drive European truck that will tow your race car at 100kmh and can be
1
Purchased new two years ago and never used due to this assembly being much too difficult to fit.into our race car. This is Wilwood part number WIL-340-3950 and the purchase price today (in Australia) is around $400- including postage. Accordingly will clear this from my collection of car parts with a sell price of $300-
1
Purchased this unit twelve months ago with the intention of using this in our Improved Production Torana race car however found that it could not be fitted due to limited room under the dash This has never been used and the current sell price for this throttle pedal with the mechanical linkage system is $724- SKU 72615 and SKU 72-79X Do not consider we will use this and would take $480- to clear this from my collection of car parts.
1
NISSAN 370Z (2009-2014) / FAIRLADY Z Z34* SEIBON GTR-STYLE CARBON FIBRE HOOD. Custom made in USA with delivery due February 2024. Sourced through Empire Performance, Myaree W.A. Price plus shipping in Australia.
10
Ford E450 2013 Jayco Melbourne 29D Motorhome (google the model for the specs) 7000miles, heavy vehicle registration so you will need a MR licence to drive. Can come with a Suzuki Jimny. Has ducted heating & cooling, 4kva genset, solar, auto levelling system Call for more details. Will come with Suzuki Jimny shown in photo
6
This RAM Laramie series, will fit the bill for Towing your Race hauler to the next meet, has all the Luxury items to make the Journey for you and your Crew Effortless. Fitted with 4500kg HD Towbar and Anderson plugs x 2 to rear. Only a Low 65,000 k's with Vehicle service just done by RAM Bendigo. Well cared for Truck, always garaged day and night. Presents like New.