SSR Enabled
Australia's #1 Enthusiast & Motorsport Marketplace
Australia's #1 Enthusiast & Motorsport Marketplace

437 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

15
Roll Cage
Log Book
1999 JDM Spec NB1 Track Car (non VVT) ECU is a BP5A – 7500 RPM limit and no EGR Valve. Extensive renovation / improvement in my ownership - quite literally there is nothing left to do! Suspension/Steering/Tyres NEW Il Motorsport 30% uprated bushes throughout – 8 front, 14 back. NEW Il Motorsport Competition Diff Bushes. NEW Top Ball joints NEW Extended (10mm) Lower Ball joints (more negative camber). NEW Track Rod Ends. Rebuilt BC (BR Type) Coil overs. NANKANG CR-S Semi slicks – 195/50 x 15.

Jimboomba QLD, Australia
Share
Watch
7
Roll Cage
Log Book
Tarmac rally car set up for Targa Tasmania or Mountain Motorsports rally events (now known as Australian Tarmac Rally). Targa spec roll cage #67658 Log Books. S52 3.2 litre motor 200KW. Suspension KW fully adjustable. 4.1 Diff ratio. Sachs clutch, 6 speed box with short shifter. Seats Cobra Profit. Rally safe wired & ready. Bell helmets wired to intercom. Wheels Speedline Corsa, Tyres Toyo Proxes R888 rear 255x40x17 front 235x45x17 Spare set of wheels & tyres. Seat belts & fire extinguishers ar

Childers QLD, Australia
Share
Watch
9
Enclosed car trailer. 8.5M long, 5.1M car storage (fits large sedan). 4500kg rated. Has fold out ramp for lowered cars. Has internal fit-out with beds, fridge, AC, lithium battery, inverter (can run AC off grid) some bunk beds and a large canvas 8x6 awning (not pictured). Lots of new parts, fully serviced recently with all new bearings, new breakaway, new internal winch. Selling to due upgrade.

Hillcrest QLD, Australia
Share
Watch
3
*** 1 SET SOLD ONLY ONE REMAINING** Porsche 991.2 GT3 Cup Wheels – 2 sets available - $4,950 per set + gst Genuine 991.2 Cup car rims, removed from my race car. Very good condition, ready to bolt on and use — no refurb needed. • Authentic Porsche motorsport wheels • Front and rear set, correct offsets • Straight, true, no damage • Ideal for 991 cup car $4,950+gst per set. Gold Coast pickup or can arrange freight

Tallai QLD, Australia
Share
Watch
5
Dale Earnhardt Nascar Engine DAI 048, all rebuild parts only used 1500 kms $40,000 [Genuine Dale Earnhardt rocker covers will come with engine] not in photo 888 spec Ford Supercar engine, new pistons, camshaft etc some parts 2000 kms $40,000 Brand new Alan Johnson [Kelly Racing] last updated spec and oil drain backs machined ready to fit, can come assembled complete if required $12,000, $16,000 DJR D3 heads completely assembled with low kms valves, springs etc $10,000 Many new Ford , Chev supe

Burleigh Heads QLD, Australia
Share
Watch
7
Log Book
Great History behind this car 1981 British Formula Atlantic Championship Placed 3rd with Phil Dowsett Driving the car. Competed in the 1981 Macau Grand Prix - Vern Schuppan driving. Car was shipped to Australia in 1982 by Graham Brown. Most recently competed in the Formula Atlantic races in New Zealand at Taupo and Highlands Park. Maintained at the highest levels with a complete engine overhaul last year only 3hrs on engine. Engine work completed by Jamie Larner - $20k rebuild - Can provide

Sunshine Coast QLD, Australia
Share
Watch
1
Mainline AWD chassis Dyno for sale. Reluctant sale due to business direction change. This Dyno has been a reliable, accurate unit and is still in use in our workshop. Details; •Genuine Mainline 4WD Dyno •Well maintained & fully operational •Perfect for performance workshops or new dyno business •Can assist with handover/training if required •Located in Townsville, QLD • Buyer responsible for removal/transport Serious buyers only. Happy to discuss details, specs and further details via phone.

Garbutt QLD, Australia
Share
Watch
8
Motorsport Carbon fiber wings, these can be single element or dual element, with custom sized end plates. These are made in house and made to order, any length up to 2100mm, chord length 318mm, can be supplied with generic wing clamp mount set, or custom intergrated mounting. Poa for specific carbon weave request, and custom mount options. Wing Single element $2995 ex gst Wing dual element $4730 ex gst Generic clamp mount set $199 ex gst

Nerang QLD, Australia
Share
Watch
5
Roll Cage
Log Book
2021 - TA2 - Transam TFH Racing Mustang For Sale. 2nd in TA2 2025 Championship with Ben Gomersall and TFH Racing. Won the TA2 2024 Championship with Josh Haynes. This TA2 / Transam comes with a G-Force Gearbox with upgraded light weight flywheel, Tilton Triple plate Clutch, Racetech seat and belts, Upgraded Wilwood Brake Pedal. Highly maintained by TFH Racing. Wilwood Brake Rotors and Pads comes with spares below, 1x set of Hoosier Wets with Rims. 1x set of Howe Jack Stand. 1x set of Wheel Hub

Logan Central QLD 4114, Australia
Share
Watch
3
Roll Cage
Log Book
Lotus Elan Series 2 DHC. Car has had the following work recently completed, twim cam engine and head rebuilt. Gearbox and diff fully rebuilt also. New solid rear drive shaft conversion installed along with new front suspension bushes and rebuilt steering rack. Rear hubs rebuilt and uprights fitted with new adjustable Spaz shocks. Also included is a 26R body kit. Power unit requires installation. Selling as I have too many Elans. Located in Brisbane.

Brookfield QLD, Australia
Share
Watch
8
Registered
Roll Cage
Your chance at owning the next best thing to an Ariel Atom, for a fraction of the cost. The Rocket is a consummate performer with attractive exoskeletal styling for a driving experience unlike any other. Very well made, with amazing handling in this quick car. 2016 build, only done 3300 km's Road registered with full engineering approval. Currently QLD rego 1.8 litre ZETEC motor. Very responsive MEV is a UK kitcar manufacturer. You can still buy the kits , but its a lot of time and $$. S

Toowoomba QLD, Australia
Share
Watch
34 1
TRUCK: MACK ANTHEM CMM - Built 2020 Top Spec MP8 535hp mDrive Automatic 36" Sleeper Matt Black Wrap - Red Paint 26,000kg GVM 90,000kg GCM - Can rate up to 110 tonne 96,000 KMS Only Serviced Exclusively by Mack TRAILER: Vawdrey custom build 2.50m 14.00m overall length Serial - 19642 REGO - YQ41PW Twin Hydraulic Doors Rear Vehicle loader 2.38m internal loading width - Long ramp will suit circuit cars Big Lithium & Solar Redarc System with 3000w Inverter Toolroom with Storage Mezz overhead, easy

Molendinar QLD, Australia
Share
Watch
14 1
Registered
Genuine Factory LHD 1995 Ford F250 XLT 460 Big Block 4x4 Rare genuine factory left hand drive 1995 Ford F250 XLT OBS powered by the legendary 7.5L (460ci) Big Block V8. This is a genuine California truck, not a conversion. Professionally complied for Australian roads, QLD mod plated, QLD registered, and ready to drive anywhere. Factory 460 Big Block, factory 4x4, dual cab and genuine left hand drive is an exceptionally rare combination in Australia. The truck has been well maintained, is m

Gold Coast QLD, Australia
Share
Watch
10
Roll Cage
Log Book
2004 Porsche 996 GT3 Cup Car – Race Ready Trade option: May consider trade for Porsche GT road car (GT3, GT3 RS, GT4 etc) with adjustment either way. For sale is a well-presented Porsche 996 GT3 Cup Car finished in iconic Martini Racing livery. Powered by the legendary 3.6L Mezger engine paired with a 6-speed manual gearbox, the 996 Cup cars are widely regarded as one of the most rewarding and affordable Porsche race cars to own and maintain. This car presents and drives very well, has been

Moorina QLD, Australia
Share
Watch
14
$25,000
Roll Cage
Log Book
RUEA I designed, built, raced and developed with the intention of making kit cars and selling but my age has put an end to that ....Engine V6 Camry 240hp Transmission MR2 Body fibreglass. Chassis space frame and carbon fibre. Total weight approx.1095kg getting about 170kmh end of straight at Lakeside. I believe if it gets engineering compliance may be registed ??? For more info and photos please feel free to call: David 0439761214

Calamvale Queensland, Australia
Share
Watch
11
Log Book
Locost racing clubman....Westfield chassis. Mallock side pods and nose cone.. (I built bonnet, body and guards and body my design) 3sgte Toyota engine 200hp at the wheels (got dyno sheet) 5 speed gear box and MB differential..... Bilstein gas shockies ... 4 wheel disc brakes.... Independent suspension .... Links ECU..... Supra Turbo...... (steel turbine wheel 19lb boost) Almost new 8 "and 10" slicks.... I've run at Lakeside andQR.... Very happy with performance Ideal for sprints and hill climbi

Calamvale QLD, Australia
Share
Watch
14
A very unique one-off eye-catching sleek designed car or machinery trailer is offered for sale by Lockyer Trailers. An exceptional craftsman built, robust trailer with no expense spared. Finished in dark charcoal Raptor coat for extreme durability, combined with sections of coloured composite aluminium panelling to create a striking and appealing result. The aerodynamic design of the front protection cone system provides an extremely fuel-efficient towing trailer. Loading ramps integrated into

Gatton QLD, Australia
Share
Watch
1
Looking for a 5 speed Mk 9 transaxle. Internals need to be in good condition. External appearance not important. Price depends on condition.

Pelican Waters QLD, Australia
Share
Watch
20
Registered
This VE SSV-Redline looks innocent. Or is it? Contact me if you want to find out. Built for track use, legally registered/Engineered. (QLD). Centrifugal Supercharger Has many upgrades to the engine, driveline, suspension and brakes enabling it to easily handle the HP and Ft Lbs it makes. Exterior and interior standard SSV Redline ex factory. Full list in photos. Ask for Dyno sheet. May trade cheaper hot hatch track capable.

Sunshine Coast QLD, Australia
Share
Watch
1
Black and White PPQ personal plate PROWL, previously on a Jaguar

Coorparoo QLD, Australia
Share
Watch