245 Motorsport Vehicles for sale

Ready to race in E30 or Improved Production class for upcoming 2027 season 2024-25 Vic championship winning car Fully rebuilt top to bottom - E30 spec rebuild 3 puck race clutch White line front & rear sway bars Bilstein 2 way adjustable shocks Eibach coils all round New PFC racing discs & pads all round Power Steering Sold with 10 rims - 4 rims brand new with set Yokohama AO50s - 4 rims 80% rubber High quality car set up, race ready Dyno sheets on request Many

1988 Nissan Skyline GTS-R Group A Australian Touring Car - Fred Gibson Motorsport - Factory Nissan Works Car - 4th Bathurst 1000 1989 - George Fury / Terry Shiel "The unsung hero of Nissan's first ATCC victory." ......A title bestowed upon this remarkable machine by many of Australia's leading motoring journalists. We are incredibly proud to present what is undoubtedly one of the most historically significant Japanese competition cars ever offered to the public this genuine Fred Gibson Motorsp

Nissan Silvia. Circuit, club, track or drift car. New SR20 engine with dyno miles only. Forged pistons, oversized valves, cams, adjustable cam wheels, power ported head, manifolds and turbo housing. Remote oil filter, front mount intercooler, strut brace, HKS hypertrac adjustable suspension with dual springs rear subframe pineapples, adjustable strut tops, strut brace, F C controller, Blitz boost controller, spare engine in parts, fibreglass bonnet, Velo seat, Brembo 6 spot calipers with large

Unfortunately the time has come to part ways with the Centreline Silver Bullet. The car has had no expense spared to make it what it is. It is for the serious competitor that needs a turn key solution. Configuration is as follows: - Mazda 3-rotor with custom intake - Holinger 6 speed sequential gearbox - AP Racing 6 piston front/4 piston rear - Penske 3-way suspension front and back - Motec dash and ECU (fully enabled) - Custom 3-piece wheels, front 18x10, rear 18x12 The car has achieved som

1988 Holden VL commodore great club or track car Bilstein suspension, coilovers at the front At the front has vt brakes twin piston Rear disc brakes Brake bias Locked diff Exstractors Cam Great beginners car been sitting for a long time car does run and drive tires are old and could do with some new fuel as it’s been sitting Has slight hail damage

Hyundai Excel in great condition. Perfect for excel series or IP racing under 2 lt Has : Supershocks, bolt in cage, short shifter, Misch excel garage radiator, custom cold air intake engine built and tuned by Ravage Raceworks ( not sealed), solid bushes all round, solid engine mounts, shift light, braided lines to brakes and clutch, custon exhaust, power steering rack, fuel press reg, front brake ducts, rpm steering wheel Spares : Bonnet, rh/lh headlamps, front bumper, lh front quarter panel,

Own a piece of motorsport pedigree. The Golf GTI TCR pays homage to Volkswagen’s championship-winning TCR racing series and delivers track-inspired performance in a practical, everyday package. Only 300 were sent to The Australian market, with approx 100 in the Pure Grey. This GTI TCR is anything but ordinary. With 213kW of turbocharged power, FWD that makes the car feel alive, and exclusive styling details, the TCR is ultimate expression of the iconic GTI - and a future classic. Selling as we

2023 Ford Mustang S650 Gen 3 V8 SUPERCAR - Liam Lawson & James Courtney - SNOWY RIVER LIVERY - Highly Collectable Current V8SC Ford Performance Motorsport- Gen 3 Mustang #SC-010 V8 Supercar Tickford Racing Built 2023 V8 Supercar series/calendar. CHASSIS: #SC-010 BUILT: 2023 - RACED: 2023 FULL Repco Supercars Season DRIVERS: James Courtney, Liam Lawson (F1 Red Bull) & Declan Fraser ENGINE: 5.4-litre quad cam Coyote V8 by Ford Performance MANUFACTURER: Tickford Racing Team TR-27 NEW OWNERS: BLAN

DATSUN 200B SX2000 One of a kind Built for tarmac Never been in any accident Very clean Runs great Can be put on club rego aswell Engine built by power head performance Car built by Palace Automotive 3/4 Brown Davis cage New Falken tyres Comes with racing slicks New ignition leads,plugs New radiator New starter motor New battery Fully serviced and ready to go Long list of mods Please call for all information Craig 0407 242 709

Great looking Lotus Super Seven with genuine international and local race history, has all the right components such as race box, LSD etc, genuine L-block, Cosworth steel crank etc non-crossflow 1500 Ford race engine, eligible for Group O (CoD process underway), engine being refreshed so will shortly be ready for competitive racing, very reluctant sale of a genuine seven with amazing history, original chassis plate, too many race cars, time for someone else to use it, perfect entry into 1960s ra

2007 Ferrari F430 Challenge Race Car - Private Collection - Bianco - ONLY 21,000klms - ONLY 142 Challenge F430's Ever Built - Raw *** TRACK CAR ONLY CANNOT BE REGISTERED*** We are extremely pleased to offer you this very special opportunity in securing of one of the rawest best driver-focused track cars ever produced from Ferrari. This 2007 Ferrari F430 Challenge "Track/Race/Club" car developed by Ferrari Motorsport for the F430 Challenge race series around the world and is a true track-focuse

Genuine Subaru RA which was imported from Japan in 2007 for the purpose of turning into a track car. Could be used for Rallying, Autocross, Improved Production circuit racing or Small Cup Car. Unfinished project sitting in the garage since 2010. Car in excellent original condition with all STi panels including factory aluminum bonnet and roof hatch. Odometer 60758kms. Has a brand new 2.5 litre crate engine fitted with cylinder heads by HSD. Turbo overhauled. New clutch. Full steel race rol

This is a very reliable, well sorted track car which is incredibly economical to run and is a joy to drive with neutral handling and excellent braking. I no longer do track days and it is currently registered but I am selling without rego as a track car (1:44 at Winton, 2:05 at PI). Future registration is possible because all the standard parts required for RWC are included in the sale (excluding rear seat, which is not required for RWC). It is very tractable and well mannered on the road. Feat

2012 Toyota 86, fitted with a Built motor Crower I beams, Forged CP pistons 10.2:1 compression ratio to suit a vortech supercharger making 230kw at the wheels. THIS CAR WAS WRITTEN OFF DUE TO HAIL DAMAGE IN NSW. AS SUCH, THERE IS HAIL DAMAGE ON VEHICLE STILL PRESENT. Turnkey, ready to race. I've had a newborn and priorities have shifted, i can facilitate interstate buyers and inspections welcome. Located Frankston 3199. Mod list: AP racing 4 pot front callipers with CP6565 floating rotor

1963 Chevrolet Corvette C2 Split Window - 1/1 Built - Superspeed Grand Sport Race Car - FULL Re-Creation from GM drawings/designs - YTG is proud to present one of the most unique and historically significant Corvettes ever built: A 1963 Chevrolet Corvette C2 Split Window Coupe, handcrafted as a one-off Superspeed Grand Sport — a stunning realisation of what GM’s secret Grand Sport project might have achieved if allowed to continue. This 1-of-1 Super-speed Grand Sport is based on original GM de

2001 Mazda MX-5 Turbo: Corners Like It's on Rails Track Dedicated Located in Chelsea Heights, VIC** Some MX-5s are weekend toys. This one's a track dedicated fun machine. Built around a 162rwkw AVO turbo package and tuned for longevity rather than bragging rights, this NB8B has been developed into a proper track day tool and it's sold with everything you need to use it. I don't want to sell this but a change in circumstances sees me having to let it go. This is a 25-year-old dedicated trac

Piece of racing history now available for sale. Won't find another one like this =Brand new , zero Ks 1200 motor with seals and receipt( John Dean) =Sealed g.box =Lots and lots of new parts - brakes, master cylinders, hoses, lines, battery, tyres, etc -Gaz adjustable shocks -Original design space frame ( built and designed by the bloke I bought it from. That makes me the second owner !) -Original fiberglass molds for the body work ( just in case) It's a very compact frame and you would want t