152 items for sale

Camaro TA2 racecar. 2019 Howe built, Recently raced by Robbie Farr at Waneroo. Car is in excellent condition and ready to race. Can assist purchaser with freight to the East Coast. 3312km

VS Commodore Ute Twin Turbo street registered Radial Drag Car . 1540 RWHP . SBC . All the best gear , Dart , Jessel , Crower , BME , Mark Williams , Weld V-Series and Holley Dominator EFI . Very reliable just freshened up with all brand new crank and rods . Regularly driven on the street and multiple 7 second passes with ease on Radials .

APG Big brake kit to suit FD3S RX-7. Used less than 5000km's Full bolt on with braided brake lines. 356mm x 32mm front disc Full floating rotor 330mm x 28mm rear disc Full floating rotor Inline hand brake kit for standard hand brake cable. Finished in Iron grey anodized. Race pad Reds (over 50% left) Optimal temperature range: 100~700°C Maximum temperature: ~750°C Coefficient of friction: 0.42~0.58 Went larger setup, no longer needed.

Monobloc racing calipers Alcon 6 piston Titanium pistons 210mm centers 42mm offset Up to 390mm brake discs

Surpluss to needs. Hitco carbon/ap racing 380mm discs 340mm discs 6 pot pads 4 pot pads Used in top tier Timeattack, Lmp and track days. Not to be confused with ceramic carbon used on exotics.

Complete fuel Injection system for Essex V6 which was removed frm a TVR. Air box and throttle body, inlet manifold, injection pump and injectors. Wiring harness probably incomplete.

Features :- Reese Goosebox hitch with air bag, suit 2-5/16" ball New Reese 8,000lb dual motor landing legs New 5,000lb electric winch New rubber torsion suspension axles Queen bed Fold out double bed Split system Air Con TV Shower -100lt water tank Gas hot water system Toilet Microwave Pantry 240/12 volt lighting Pull out cradle for 60lt Engel under seats Measurements:- Overall length - 11,350mm Body length - 10,800mm External width - 2,500mm Front section length inside - 4,350mm Rear section le

AP Racing CP3985-230EV x3 brand new, & x1 used, bought for my Nissan GT3 but have now found a set is stainless steel HD version so fitting these instead. Great price, great opportunity, can be collected or i can post.

Tatum pro Buggy ,7 LT engine , 6 speed Albins sequential, all new engine full rebuild 400 kms old $55k spent on engine and motec system plenty of spares , full set of spare wheels with 3/4 rubber on all 8 wheels, all new power steering system front to back , hoses , rack , and pump . Most of the running gear on the buggy is Trophy truck spec ,hubs , brakes ect . Ring for more info

For Sale Excel race car Current Spec Supashocks suspension Poly bushed Brown Davies State level roll cage Winmax 6.5 brake pads Current Spec Dunlop tyres Sparco Grid 2 race seat Sealed fuel pump Short shifter Fuel Pressure regulator Alloy catch can Whiteline Rear Sway bar Braided Brake Lines 6 Point Harness GoPro mount Battery Box with provision to charge Go Pro Spare set of wheels Some spares Jerry cans Trolley jack Axle stands Spare brake pads (Brand New, 2 sets) Dorian lap timer included in

PORSCHE 996/993(964/944) 18 INCH BBS GT3 RIMS IN TOPCONDITION 7,5jx18 et 50 10jx18 et 65 These Nice Rims fitted under a Porsche 996/993 Narrow Body ,and with spacers rear from 10 mm under a Porsche 964 and Porsche Model 2

Service truck. Build to fit in a 40 foot container. Has been used as rally service truck with large roof space for wheels or bumper etc. Good condition with WA rego. Loads of space with lots of shelving and 2 large tool cabinets. Lockers for Jacks, stands etc. Can also be sold with 40 foot container with tie down setup and bench that can also carry one car. Good condition, always been stored inside.

HDT Big Brake kit. Fits inside 19" SSV wheels. Used for approx 500 kms, as new with mounting kit, dog bones etc.

412 cube Nascar sb2.2 engine full dry sump comes with Ignition and fuel system twin carbs headers and converter to suit 2 speed glide. Approximately 25 passes has run a best of 8.39 quarter.

Group Nc log booked car with new engine. Currently running 48mm Webers, Cat 311/304 cam, upgraded billet rockers (Cat), Ross race pistons, four speed gear box and matching diff, (spare diff included in the sale). Extra set of wheels also included. Well sorted car that has previously enjoyed success at Wanneroo Raceway and Collie Motorplex. Great way to become involved in Historic Touring Car racing at a reasonable cost.

One of one 2010 Mitsubishi Evo X RS. This car has won every event it has entered and finished in the last 7 years, and holds every stage record. Only 50 brought in to Australia, and only one in this spec. Custom mods list: JUN cams/springs/retainers ARP studs - head and rod bolts Nitto 2.2 stroker kit with billet crank I-beam rods, forged pistons Nitto head gasket Extended custom oil pan/sump ACCU sump oil surge prevention accumulator 2400cc injectors Twin Bosch motorsport fuel pumps and fuel su

This 2003 Nissan 350Z is offered for sale after long-term ownership and has proven to be a competitive and reliable club car. Under the bonnet sits Nissan’s famed VQ35DE V6 engine putting out approximately 300hp and is in factory standard specification. Engine management is looked after by a Haltech ECU and air flow is improved via a set of extractors and sports exhaust system. Gear changes are taken care of via the factory six speed manual transmission that has been recently reconditioned. The

Make an offer. Needs to go. 4 car Transporter 2007 Mercedes Atego 1628 Big Cab 807,000 kms This truck features- Bunk Beds in Big Cab Built in 2 car hoist runs on PTO 2.5 ton tail lift Belly lockers Holds 4 open wheel race cars Sat nav 10 inch android screen Amplifier & subwoofer UHF radio Cruise at 100kph 28lt/100km Bull Bar New tyres New airbags Seatbelts for 6 people Sleeps 2 We have upgraded to a larger vehicle to carry more cars.