SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

16 items between $10,000 & $20,000 for sale

Refine Search

Clear All
Keyword
Price
$10,000
$20,000
Listing Type

All Results

4
FORD NEW V8 7.3 LITRE PETROL GODZILLA 6 SPEED AUTOMATIC TRANSMISSION COMPLETE PACKAGE ENGINE TRANSMISSION HARNESS ECU FAN AIRBOX ECT

Wollongong NSW, Australia
Share
Watch
10
Registered
Up for grabs is my 1997 Subaru Legacy TS type R B Limited, these were the final edition of the 2nd generation Legacy. A pretty rare model in the rarest Cashmere yellow as they were only available in silver, white or yellow. It also has the factory upgraded 16inch alloys. Car is sitting at 154,800 kms Cambelt was done 2017 The car is still completely original and untouched, car is also still in really good condition and interior is in mint condition car is located in Christchurch New Zealand. Ca

Christchurch, New Zealand
Share
Watch
8
Registered
Log Book
2006 Ford Fiesta XR4 150K KM 12 months rego from Thursday 14 March Body and paint is good and presents very well, few stone chips as expected, front bumper needs a paint Interior is excellent condition, won't come with the Sparco but will include the seat base if needed. The original seat will come with the car and fitted. I have a brand new rear boot badge and rear vision mirror to fit + Cosworth Cams + Cosworth manifold (genuine) + 4-1 Miltek exhaust + Larger upgraded throttle body +

Maroubra NSW, Australia
Share
Watch
10
Roll Cage
Log Book
Turn key supersprint car for sale; ready to roll in 2024 Supersprint Series NSW Overview of cars history: Originally a daily drive from new, then sold in 2017 to a father/son project team who commenced a track car conversion spending on upgrades to include a Southbend competition clutch, Volk Ray wheels, Kuhmo semi slick tyres, KW shocks and SPL suspension components, 6 pot Brembos front and 4 pot rear, Borla cat back s/s exhaust, Kinetic inlet manifold and upgrades with Hotchkiss front an

Colebee NSW, Australia
Share
Watch
4
7000km complete 2017 Mercedes-Benz C63 engine and brand new T56 Magnum 6 Speed Transmission. Thats 500+ horse power and comes with original wiring loom and ECU etc. Engine is from a statutory write off and presents as new. The T56 is brand new and comes with an Ultimate Street Shifter and High Performance CSC, all purchased from Mal Wood. Receipt available. See link below for Transmission spec. https://malwoodauto.com.au/tremec-t56-6-speed/

Gosford NSW, Australia
Share
Watch
2
2.57 1.99 1.66 1.35 1.14 1:1 Has been used for 1 season behind a 2.4na engine As new condition.

Swan Bay NSW 2471, Australia
Share
Watch
14
VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun

Greystanes NSW, Australia
Share
Watch
13
Log Book
Subaru WRX GC8 1999 model car has been set up for track days EJ20 5 speed timing belt water pump kit done (haltec computer) VF34 STI turbo AGI six point roll cage with harnesses STI version 2 front seats STI wheels new 17x7 +48 Nankang AR1 tyres 215x40x17 brand new (not the ones in photos) GD alloy front lower control arms STI top Mount intercooler STI strut brace Coil overs Car is ready to go nothing to spend Car is registered 12 months rego

Artarmon NSW, Australia
Share
Watch
7
SBC 4 BOLT BLOCK, 360 CUBIC INCH, SCAT CRANK & RODS, PROBE PISTONS, 9.1 COMPRESSION, COMPS HYDRAULIC ROLLER CAM SYSTEM (SEE PIC FOR FULL DETAILS), ALLOY HEADS & STAINLESS PIPES, 671 POLISHED STREET BLOWER COMPLETE LESS CARBS, BOX OFF POLISHED PULLEYS & DRESS UP KIT. EVERYTHING IS BRAND NEW.

Coffs Harbour NSW, Australia
Share
Watch
5
Used 2wd Dynocom dyno with PC, 2 ramps (Not pictured) and hand controller. Was purchased from a workshop in QLD however has remained uninstalled in current location due to noise restrictions not allowing its use in the current workshop. Pickup preferred but if transport required please contact to discuss.

Somersby NSW, Australia
Share
Watch
9
SX02 SimworX Chassis system¬ (2016 chassis #398) Triple 27" LED Screens SimworX Race Seat Motec style digital data dash SimworX Pro Series GT V3.1 Racing Pedals Fanatec Clubsport wheelbase V2.5 Fanatec Clubsport Suede steering wheel SimworX Pro Series Sequential Shifter Dedicated Audio Amplifier fitted integral with the chassis Sub Woofer built in to Chassis Surround sound speakers PC (new PC installed August 2021) Scorptec Esports RTX 3070 Gaming PC Intel Core i7 11700K

Young NSW, Australia
Share
Watch
13
We are offering for sale various spare parts to suit Audi R8 LMS MY16-18 including some body panels, Ohlins TTX36 damper set, various spring sets, 2 x pairs of restrictors 38 & 39mm, 1 x pair open throttle body adaptors, 1 set of high stands, 2 x new Krontec LL24 air jacks, various control arms, camber shim sets, clutches and release bearing, Hoer Gearbox housing. Contact me for further information and pricing on parts or make an offer for the lot.

Blaxland NSW, Australia
Share
Watch
4
RPS Carbon race brakes, 2x sets of 380mm front discs and 1x set of 356mm discs and pads, comes with hats, I purchased these to run on my V8 Supercar and then my racing series banned the used of Carbon brakes, hence these are no longer of use to me, we did around 10 laps of initial testing and one set of front discs is still brand new. These weigh roughly half of what the steel brakes we run do. Selling for half of my purchase price. Contact Nick +64275536300 or email nick@chesters.co.nz

Auckland, New Zealand
Share
Watch
7
$16,000
533 cube BBC Blower Motor. New engine never been started. Manifold to sump Chev block 4 bolt mains,Howards main caps,grout filled.Ohio crankshaft 4340 BBC,Crank hub and bearing support,Bullet custom grind cam (326/336-R1/4 S/NO 91264),Crower Rocker Assembly (1.7 Intake 1.7 Exhaust).Crower sever duty cutaway .903 rollers,Bill Miller Pistons 494 Solid Dome (Bore 4.6050,Comp Height 1.250,Fly cut)Bill Miller Alloy Rods,Moroso Oil Pan,Ported Heads and matching manifold.Miloden gear drive.Sumner bros

Windsor Downs NSW, Australia
Share
Watch
14
Nissan 370Z rolling shell, custom Roll cage with side intrusion, air jacks mounts, billet steering Coolum, front nudge bar, lift off doors, rear separation wall, the fabrication so far has been over 16k without the pedal box and airjacks, and velo seats. I have the standard hatch and bonnet and guards but no lights. Car was imported with flood damage originally so not in a accident and written off, it’s a straight clean shell. I’ve lost interest so my lose will be someone else’s gain

Mittagong New South Wales, Australia
Share
Watch
2
G force gf 2000 McLeod clutch and billet Steel flywheel Ser5 bellhousing Ihra approved steel shield Starter motor right hand drive shifter Gearbox crossmember Mark Williams Tail shaft yolk complete set up from Pac performance rx3 13b dentist has run 7.0 all in perfect working order ready to use $12000

Padstow New South Wales, Australia
Share
Watch