38 Motorsport Vehicles for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
10
Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel
8
526 Keith Black Hemi, Magneto, Ken Veaney heads, Ally rods, Bryant crank, Reid cased Powerglide with auto shift,Ladder bar rear end,. Fire supression system, nappy, Wet sump. 2 parachutes. Very straight reliable car, ready to race.
10
Roll CageLog Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,
19
Roll Cage
XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)
7
Roll Cage
Excellent value - A really well-sorted Lotus 7 with period correct Ford 1600 GT engine, fully rebuilt. This car has been thoroughly restored, with suspension, brakes, engine, gearbox, steering, electrics, etc, all reconditioned for use in motorkhanas. Rollbar, harness mounts, towing points and new competition tyres on wide Elan wheels all fitted for this purpose. The car is not registered, but has documentation and has had engineering advice and inspection in readiness should a new owner wish t
34
598 bbc -1150 hp 7.5s @175mph on soft tune Merlin block (grout filled) Brodix heads Methanol injection Racglide with transbrake+airshift Delaybox Airbrushed paint Custom tilt trailer with electric winch Getting out of racing My loss your gain Please call Greg 0436377406
19 1
Roll Cage
Brand new 383 Chev Roller engine Hillborn injection, powerglide. MSD ignition, 35 spline maxispool diff 4.33 diff gears, Harrop alloy diff carrier, deadenbear delaybox, chute, Convo Pro rims, the list goes on. Ground up build, bare metal respray, this car is a true steel body car with everything done and ready for its debut run down the 1/4mile. Receipts for engine and work total well over asking price. Further details contact Chris on 0409348441.
5 1
The GTR-X was a fascinating concept from the get-go; A fibreglass body, over a steel “ladder” chassis, which may seem exotic to an Australian market, but GM had been successfully using that technique with its iconic sports car, the Corvette, from 1953’s C1. Come 1969, the Corvette had evolved to the swoopy C3 guise, featuring independent suspension, four-wheel disc brakes and wild 427 L88 spec’ motors. Along that 16 year passage, the Corvette’s early mistakes became improvements and a smooth, fa
8
Hi. Putting this ad up on behalf of my partner. Has to be gone asap so BEST OFFER GETS IT!! Rare as rare 1968 model Datsun 1600 (P510) with the inward wiping windscreen wipers that set them obviously apart from all the rest. This 68 Datto 1600 looks to be one of the first of the first with a very low build number on VIN. Still has both original matching compliance plates This thing WAS completely original when I found it nearly 30 years ago. It's been locked in my garage ever since. Body was s
5
1969 Chevy Camaro top sportsman super sedan drag car 540 stack injected big block 2 speed power glide New tires brand new electrical right through car Brand new floor IHRA tech About 12 passes since engine was freshened Awesome consistent car to race
20
Log Book
1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.
7
Roll Cage
2006 Z28 Camaro Funny Car, N/A Methanol mechanical injection, 665BBC, has been running in modified, best time 7.76. Dart heads, Jesel rockers, Dominator TC, Brodix block. Supaglide Reid 2 speed box - 1.80 straight cut gear set, turbo input shaft, 8 top gear clutches, transbrake. 9 inch Strange full floater rear end. Engine and box have been freshened up ready for season but hasn't been run since 2019. Fire suppression, 2x chutes, Supajax car jacks + custom tools and trays for car for easy set up
8
Log Book
Professionally Australian built with American know-how. Motor is a fully worked big block Chrysler (253 cube) 3 speed gearbox, with USA quick change diff. Has triple Rotchester cars and an all alloy body. The tyres are racing 600x16 Dunlops, done 20hrs. The car itself had never been damaged and is well looked after. Last 8 years competed in regularity events in Perth. It is currently CAMS log booked. Owner is member of VSCC WA. Car garaged in Perth metro. This unique one of sprinter is modelled
11 1
It's time for my Humber Speedster project to be passed along to someone who can finish it. I had always wanted a pre-1920’s Speedster but as they don’t suit the highway driving of today I decided to make one from a car that could. The donor car was a ’32 Humber rolling Chassis. All the hard work has been done, and 99% of the materials and components purchased. I have chronicled the build in photographs and a blog, plus starting the engine for the first time on a video. When going through the par
9 1
Roll CageLog Book
Current IHRA tech inspection and logbook. Selling to progress dragster. Tunnel ram Methanol injection on stroker SBC. Motown block, runs a cooling system as well. Racer pro heads and manifold. Trans brake PG transmission and full floater sheet metal 9". Has delay box and solenoid shifter. Turn key car runs super consistent 8.5 sec quarter mile. Enclosed trailer available separately. Can separate and sell as a roller, minus engine and transmission for $12K Or car with watertight enclosed tandem
4
21 foot shovel nose hydro only one of 3 known to exist, lovingly owned by war veterans and good friends of mine, blown small block Chevrolet engine on 40 percent nitro, only 4 runs on engine and drivetrain, super smooth and easy to tune and drive, engine has gone over 200 mph at Bonneville in a roadster and runs easily in the 8 second range, number 1 qualifier last time out, engine has velasko aries jessel afr etc, no junk.. cs1 lenco all new or rebuilt, add fuel and go, delivery to shipping yar
9
5.4 lt rare manual V8, 5th anniversary (only two for sale on car sales) most of the work has been completed. the car needs the interior finishing, we have no time due to work and other commitments. mostly motorsport, have all receipts for the parts and the repairs completed. will need to go for a wovi inspection once finished. original right rear quarter damage (see photo) has been repaired by a local panel shop, if you have the time to finish it. this is a great car and drives great.
5
Roll CageLog Book
1980 ford xd falcon drag car New car has arrived wanting to move on asap Factory 351 manual 9 inch car Very clean car absolutely no rust paint in mint condition Would keep the car but I have another project and can’t keep two cars. 393 Cleveland has had freshen up. Two passes old. Mechanical methonal injection Fuel system has had overhaul same time as engine C4 transbraked reverse pattern auto Strange 9 inch diff (4.3) setup with ladder bar suspension and adjustable shocks Car run
11 1
Roll Cage
1975 Lancia Beta Coupe used for hillclimbs, sprints SPECS: 2litre GUY CROFT race engine built 2014/15 with CP forged pistons, forged rods, GC prepared VX head, twin 45DCOE carbs, race cams, 4-1 extractors with 2.25"exhaust,pipercross air filter, cold air intake, steel flywheel/SPEC race clutch. 155BHP at wheels. (190 at crank) Crank scraper/baffled sump/accusump/remote filter/oil cooler/alloy radiator/electric waterpump/MSD ignition/rev limiter/50L fuel cell/race battery etc. 6 point FIA approve