314 Car, Bike or Kart for sale

Subaru GDB Sti 2005 – Circuit, Hillclimb, Rally Car Motorsport Australia Log Booked (State Level Circuit) AGI 6 Point Bolt in Cage (MA Registered) QLD Mod Plated EJ207 2.1L Stroker Engine built by Maximum Motorsport – Receipts available. Blouch Dominator 1.5XTR 10cm Turbo Subaru Genuine Nitrided Crank – 79mm ARP 625 Head Stud Kit Manley H-Beam Rods with ARP2000 Bolts Manley Platinum Series Pistons – 92.5mm Bore x 79mm Stroke ACL Race Series Main Bearings ACL Race Series Big End Bearings Link G

1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.

Built to Group A Homologation. Classic class eligible. Motorsport Australia (cams) log book. On Qld rally rego. Strut to strut national level registered cage. MCA Gold adjustable suspension. JA 2.0 Liter Turbo with intercooler. ARCom approved upgrade to Garret GT2560 turbo and mpi inlet manifold. EMS engine management. Rack & Pinion EPAS conversion. Dual brake master cylinders with adj balance bar. Wilwood 4 spot calipers and larger front rotors. Original rear disk brakes. Hydraulic hand brake.

•Built from a very rust free CK44 rolling shell. Only rear wells and heater bubble replaced. Steel Mexico front wing flares added. •Bare metal shell repainted. •Rebuilt and upgraded 1600cc GT OHV engine built by Trevor Hines. •Significant number of new or NOS parts used including:- radiator, starter motor, alternator, head lining, 9” rear brakes, Mk2 front suspension, M16 callipers, all new bearings and bushes, tca’s, carpet, laminated windscreen, clutch, battery, new tyres. •Genuine UK made ste

This Minetti has been a total rebuild of electrical with all Haltech equipment. This includes IC7 Display Dash, 2500 Elite ECU, 02 Wide Band Sensor, HPI4 Power Ignitor. The engine is a Gen 2 -1340cc Suzuki Hayabusa with 8 injectors and has the low profile sump with a 360 degree swivel pick up. The body is a new 1 piece lightweight version. Other equipment includes, new 6 point harness, MCA fully adjustable shockies front and rear, new Avon tyres only 2 meetings old, Dyna jet quick shift for flat

Professionally Australian built with American know-how. Motor is a fully worked big block Chrysler (253 cube) 3 speed gearbox, with USA quick change diff. Has triple Rotchester cars and an all alloy body. The tyres are racing 600x16 Dunlops, done 20hrs. The car itself had never been damaged and is well looked after. Last 8 years competed in regularity events in Perth. It is currently CAMS log booked. Owner is member of VSCC WA. Car garaged in Perth metro. This unique one of sprinter is modelled

2018 Porsche 991.2 Cup car. Car was originally Porsche Sport Driving School Level 5 car. Then raced in Michelin Sprint Challenge by Lockie Bloxsom. The car has been meticulously maintained by McElrea Racing since new. Car has12941 km, engine 78.5 hrs, gearbox 5.5 hrs (25 hrs remaining), driveshafts 11hrs (less than half life). Car comes with Supercup exhaust, travel nuts, two spare sets of wheels, car cover, wheel socket and air lance. $275,000 plus gst.

Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough

Project car regrettably up for sale 4AGE-ZE motor with LA3 mod plate Cast iron Celica 5-speed gearbox Shortened Hilux diff 15” Simmons wheels Front mounted intercooler behind bar Very clean underneath, no rust in chassis Interior mostly complete, missing a couple of mouldings in boot area Exterior in good condition, a couple of small rust spots, nothing major Motor not currently running Will require ECU and partial rewire Selling due to not having enough time - have had the car for 8 years

It's time for my Humber Speedster project to be passed along to someone who can finish it. I had always wanted a pre-1920’s Speedster but as they don’t suit the highway driving of today I decided to make one from a car that could. The donor car was a ’32 Humber rolling Chassis. All the hard work has been done, and 99% of the materials and components purchased. I have chronicled the build in photographs and a blog, plus starting the engine for the first time on a video. When going through the par

1962 MORRIS MINI 850 FITTED WITH FUEL INJECTED YAMAHA R1 AND QUAIFE LSD HALTECH ECU FIBREGLASS LIFT OFF FRONT HALF ROLLCAGE VENTILATED ROTORS WITH 4 SPOT CALIPERS FRONT COILOVERS 2 FUEL TANKS HIGH AND LOW PRESSURE FUEL PUMPS 3 PIECE ALLOY WHEELS FITTED WITH HOOSIER TYRES 2 RACE SEATS 2X 5 POINT HARNESS NSW ENGINEERING PAPERS WAS REGISTERED IN NSW CURRENTLY REGISTERED IN QUEENSLAND

Built by "KirksWorks" Race Service in 2023 for Queensland and Australian Production Cars (QPC/APC). M2C was built for myself with top quality parts and labour. A regretful sale as i would like to participate in National GT4 Championship 2024 so i need it gone and get an GT4 spec car (M4GT4). If I won't sell it for that price I'll do a APC/QPC in 2024 season. - Had it since new and serviced every 4000-5000km. Currently 50K on the clock. - Full race car build can be found on Instagram - vodkaa_r

Price Dropped to meet the market! This is a future modern classic and a smart investment for the avid motorcycle collector. SZR BELGARDA/YAMAHA SZR660 Super Mono Thumper. Built by Belgarda Spa Racing Italy for Yamaha to win the World Super Mono Championship, which it did!. Its an official Yamaha model so all parts through Yamaha. *660cc single cylinder 50hp *LAMS approved *Bike is stock except for muffler which is Titanium off a ZX10R, sounds awesome! *Frame TZ-R 250 *Swingarm TZR-125