165 items for sale

Subaru GDB Sti 2005 – Circuit, Hillclimb, Rally Car Motorsport Australia Log Booked (State Level Circuit) AGI 6 Point Bolt in Cage (MA Registered) QLD Mod Plated EJ207 2.1L Stroker Engine built by Maximum Motorsport – Receipts available. Blouch Dominator 1.5XTR 10cm Turbo Subaru Genuine Nitrided Crank – 79mm ARP 625 Head Stud Kit Manley H-Beam Rods with ARP2000 Bolts Manley Platinum Series Pistons – 92.5mm Bore x 79mm Stroke ACL Race Series Main Bearings ACL Race Series Big End Bearings Link G

This Minetti has been a total rebuild of electrical with all Haltech equipment. This includes IC7 Display Dash, 2500 Elite ECU, 02 Wide Band Sensor, HPI4 Power Ignitor. The engine is a Gen 2 -1340cc Suzuki Hayabusa with 8 injectors and has the low profile sump with a 360 degree swivel pick up. The body is a new 1 piece lightweight version. Other equipment includes, new 6 point harness, MCA fully adjustable shockies front and rear, new Avon tyres only 2 meetings old, Dyna jet quick shift for flat

2018 Porsche 991.2 Cup car. Car was originally Porsche Sport Driving School Level 5 car. Then raced in Michelin Sprint Challenge by Lockie Bloxsom. The car has been meticulously maintained by McElrea Racing since new. Car has12941 km, engine 78.5 hrs, gearbox 5.5 hrs (25 hrs remaining), driveshafts 11hrs (less than half life). Car comes with Supercup exhaust, travel nuts, two spare sets of wheels, car cover, wheel socket and air lance. $275,000 plus gst.

Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough

Project car regrettably up for sale 4AGE-ZE motor with LA3 mod plate Cast iron Celica 5-speed gearbox Shortened Hilux diff 15” Simmons wheels Front mounted intercooler behind bar Very clean underneath, no rust in chassis Interior mostly complete, missing a couple of mouldings in boot area Exterior in good condition, a couple of small rust spots, nothing major Motor not currently running Will require ECU and partial rewire Selling due to not having enough time - have had the car for 8 years

1962 MORRIS MINI 850 FITTED WITH FUEL INJECTED YAMAHA R1 AND QUAIFE LSD HALTECH ECU FIBREGLASS LIFT OFF FRONT HALF ROLLCAGE VENTILATED ROTORS WITH 4 SPOT CALIPERS FRONT COILOVERS 2 FUEL TANKS HIGH AND LOW PRESSURE FUEL PUMPS 3 PIECE ALLOY WHEELS FITTED WITH HOOSIER TYRES 2 RACE SEATS 2X 5 POINT HARNESS NSW ENGINEERING PAPERS WAS REGISTERED IN NSW CURRENTLY REGISTERED IN QUEENSLAND

Built by "KirksWorks" Race Service in 2023 for Queensland and Australian Production Cars (QPC/APC). M2C was built for myself with top quality parts and labour. A regretful sale as i would like to participate in National GT4 Championship 2024 so i need it gone and get an GT4 spec car (M4GT4). If I won't sell it for that price I'll do a APC/QPC in 2024 season. - Had it since new and serviced every 4000-5000km. Currently 50K on the clock. - Full race car build can be found on Instagram - vodkaa_r

2022 TA2 championship winner driven by Jett Johnson. Prepared and maintained by Team Johnson for 2022 season and then prepared for 2023 season by Team Johnson and Ben Leeds. Completed one round at Tasmania and then fully serviced by Ben Leeds (ex 888 race mechanic) and not run since. Engineered and setup by current supercar engineer Paul Forgie. New Mc Laren build engine has only done two race meetings. Gearbox rebuild, diff and axles crack tested with new axles fitted. Numerous upgrades as r

Bathurst 6 hour race 2015 Mercedes AMG A45 2.0ltr Turbo AWD 7-speed Paddle Shift A1 Production Car This is Turn Key Ready to Race Car This car has been a reliable and competitive car competing in QPC for many years now and has been exceptionally well maintained. Easy to drive and well sorted perfect step into production car No Major Accident or Mechanical failure : Motec dash and data logging : Custom MCA Gold (1 Meeting since Rebuil by MCA) : Brembo 4 pot e

Hard to find V6 Busso engine 5 speed manual , Has been prepped for Targa / Tarmac rallies , but still can be an every day driver / track car , Leather interior , Air Con , electric windows etc , 146, 700 k's , Timing belts replaced recently , upgraded Bilstien suspension , Power Chip upgraded ECU , Larger throttle body , Cold air intake , New front brakes , Quick release Sparco steering wheel , Sports exhaust , external hold down / locking bonnet latches , comes with original steering wheel and

This ad is for 2 x BMW 135i’s. The first is completely ready to go with fresh fluids recently completed. Has new brakes pads yet to fit. Engine and gearbox were refreshed 6 meetings ago. This car has auto box with pad shift. Coolers on and on with the list. Can race in multiple categories such as APC The second car is the ex Turner/ Rubis car which suffered frontal damage at Sandown this season. It is still running and has freshened engine, gearbox and diff 2 meetings ago. Again has all the s

Brand new build BMW 330i " Bathurst 6HR ready" "APC ready" Group 3E production car compliant for Class C 2024 Bathurst 6 hour just completed - fastest Class C car by over 3.5 seconds per lap 8 speed auto with xHP tune Custom stainless steel exhaust including dump pipe Logbook Full FIA Roll Cage New Diff cooler & pump Aim Mxm Dash and Smarty Cam Sports on board video New 90litre foam filled race fuel tank built to MA endurance specifications All fuel lines are fully braided with alloy race fitt

Possibly the best available in the world, almost as originally built by Lola Cars England. Research indicates this is one of only 2 remaining T-8750 circuit race cars in the world. Now eligible for Australian Historic race car registration. Magnificent quality, presentation and detail. Fitted with fresh 3.8 L V6 Buick engine and is ultra-competitive. Composite Carbon fibre/aluminium honeycomb construction, combined with world’s best engineering by Lola Cars England makes this a robust and reli

FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL