82 items in Australia with Roll Cage for sale

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

IMPORTED BY MITSUBISHI MOTORSPORT FULL QLD REGO - CAMS LOGBOOK ONLY 24 000KM ON CHASIS 2018 TARGA TASMANIA - 2nd Class / 5th Outright Rookie Engine rebuilt less than 10 000 km ago by previous owner ( 210kw @ wheels on 98 tune ) Currently on factory Evo 8 turbo - Fuel sampler fitted to fuel line Motec ECU ( Launch Control & 2 stage Anti-Lag activated ) Proflex ball bearing cannister shocks & Adjustable Coil overs ( Eibach springs 2 sets ) Full Welded Bond Chrome Molly cage Gearbox recently fu

Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) haltech and loom $2000 extra brakes - need plumbing and finishing off turbo - eith

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

EVO7RS - Les Walkden built factory RS, Car No. L12. Ex Ed Ordynski car, CAMS Log booked, Chromoly welded cage, Freshly rebuilt Evo 9 Mivec motor to Targa spec, 250awkw, near new Owen Developments turbo, Motec ECU with anti lag, New MCA Gold suspension, freshly rebuilt RS gearbox, Coralba rally computer, heated front screen, quick release RaceTech wheel, near new oil cooler and radiator, Evo 9 front bumper and rear diffuser, new belts, new fire extinguisher plus fire bomb, 2 sets of OZ light weig

Regretful sale of my 2012 Clio RS, but not enough room in the garage for 2 x track cars! Extensively modified and improved over the last 2 years specifically for track use; could be improved further or easily converted back to (very fast) road spec. Recent work includes custom-made Brown Davis 1/2 cage (Motorsport Australia certified), 6-point Sparco harness, Sparco race seat, Black Diamond competition clutch, lightened flywheel, Quaife LSD, custom exhaust, port & polish, Cat Cams with heavy dut

Toyota MR2 SW20 built for track days and road use. Car is in great condition. Engine 5SGTE 2.2l stroker crank Aeroflow turbo Custom exhaust Custom air cleaner and intercooler Haltech engine management Runs E85 and flex tuned 380Hp at wheels( its fast...) Gearbox, 5 speed with locked diff. Custom alloy radiator/thermos fans Custom engine compartment extractor fans Power steering, power windows no aircon. Race seats and harness plus standard seat belts fitted. Roll cage Mod plated for qld. Afte

1961 Elfin Zephyr Special. No.14 of the first 23 Elfin's ever made. Built by Noel Heard & Gary Cooper using a 2.6 L Zephyr 6 cylinder motor. Noel raced it in the 1961 Grand Prix. Won many hill climb championships, this is a great piece of Australian motor racing history. Noel completely rebuilt the car in 1998. The car has been used very little since. It is logged as a group M car with many photos & trophies. Sadly, Noel Heard is no longer with us but he was a wealth of information about the car

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford

Immerse yourself in performance and prestige in this 2017 Porsche 911 GT2 RS MR, a pinnacle of engineering excellence within the 991 generation line-up. Enhanced by an array of Manthey Racing upgrades, including the GT2 RS kit, exclusive MR seats, decals, and high-performance brakes, this masterpiece melds power with precision in a way only Porsche can. At its heart lies a formidable 3.8-liter twin-turbocharged flat-six engine, renowned for its blistering 690 bhp output, all channelling ferocio

Update: Open to negotiation, as I have other projects that I wish to pursue! All offers considered. Extra photos have been added so you have a better idea of the condition. Yes, it's been used and enjoyed, but still has lots of life in it. AND you'll still get the "clubbie grin"! ================ Birkin S3 2004 Toyota 4AGE Blacktop 1600cc with Silvertop cam belt assembly and ST rods Motec M4 ECU Ford Type 9, 5 speed gearbox, standard ratios Borg Warner M68 diff with LSD, 3.9:1 Toyo R888R rubbe

Amazing 1.9ltr DC2 - Motec M1, Dart block, Golden Eagle crank and Rods, Wiseco pistons. Built for boost... and to be a reliable track engine.. currently turned NA.. Toda headers.. Built by JHH - see image of JHH stamped engine. All Ferrea heads components , over sized valves, 1000cc Injection Dynamic injectors ATS Carbon clutch ATS LSD Skunk cams Spoon brakes Tein Super racing coil overs, with external reservoirs Cusco sway bars All bushes changed with Hard Race bushes. Unfortunately only s

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Puma 2 for sale $34,450 ono Puma 2 is powered by a Nissan s13 SR20DET (about 180rwkw) and has a 5 speed gear box. The colour is stunning and has the normal stone chips you’d see on a driven example. Puma 2 has: • 15x7 koya wheel (matching spare on the back) • Canvass roof • Racing rear roll bar and cross bar with fire extinguisher mount Puma Clubmans are a larger chassis to suit normal sized humans. The not so good is that Puma 2 could probably do with a new clutch, which I have and will

Car is one of 128 Porsche 944 S2's delivered in 1989 (build date is December 1989 & delivered to Hamiltons in early 1990). * Approximately 180,000km (I have full history & owners are well known within Porsche Club Victoria) * Fully rebuilt motor (slight power increase) & new clutch pre Covid with limited use since (cost $18,000) * M030 components including Brembo ABS brakes with slotted discs & new pads * Eibach springs, adjustable koni shocks (with spare springs & shocks) * I have a range of w