40 Motorsport Vehicles for sale

Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.

This left-hand-drive, GM Australia-built Holden Monaro is a real head-turner and the perfect car for the collector, professional racer or track day enthusiast – or the same person all wrapped up into one! The Monaro was assembled by GM Holden at Elizabeth in South Australia and is believed to be one of only a handful of left-hand-drive examples in the country. The odometer reads 31,739kms of which the vast majority (~31,000kms) were driven by Holden engineers at the Lang Lang proving ground in

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

Save yourself the import hassle (and costs), this American beauty is ready for the track! 2020 Corvette Stingray C8 3LT - Left hand drive import Mid-mount 6.2L V8 8-speed automatic Factory CA rims with 19" front and 20" rear Michelin's Odometer: 48,xxx KMS Perfect for track/circuit performance racing with factory GM LHD. Used as display car for Thunderbolt Run, Australia's Premiere Luxury Car Rally - www.thunderboltrun.com.au Located: Bundall, QLD (Gold Coast) Contact Vas on 0429 877

1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Holden Commodore HSV Clubsport LS1 5.7ltr manual Engine built by Ravage Raceworks 325 rwkw LS6 inlet manifold , cnc ported heads roller rocker crow cam , high pressure oil pump, baffled sump , harmonic reduction balancer , ARP rod bolts, performance throttle body etc. Exceedy clutch T56 gearbox eaten tru trac diff with external oil cooler and fan/pump Acott suspension built front end, adjustable coilovers front and rear bilstein shocks adjustable front sway bar, AP racing brakes front 375mm

For sale is a pristine 2017 Mercedes-Benz AMG C63s Coupe, boasting a modest 65,868kms on the odometer. This model features the elegant Dimond White exterior, complemented by the complete "Edition 1" Full interior. Recently fitted forged AMG wheels and brand new Nankang AR1 Semi Slicks (Cost me $5500) Regrettably, due to water exposure in NSW, the vehicle has been declared as a statutory write-off and, therefore, cannot be registered in Australia. Despite its pristine condition with no history o

Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough

Project car regrettably up for sale 4AGE-ZE motor with LA3 mod plate Cast iron Celica 5-speed gearbox Shortened Hilux diff 15” Simmons wheels Front mounted intercooler behind bar Very clean underneath, no rust in chassis Interior mostly complete, missing a couple of mouldings in boot area Exterior in good condition, a couple of small rust spots, nothing major Motor not currently running Will require ECU and partial rewire Selling due to not having enough time - have had the car for 8 years

Hard to find V6 Busso engine 5 speed manual , Has been prepped for Targa / Tarmac rallies , but still can be an every day driver / track car , Leather interior , Air Con , electric windows etc , 146, 700 k's , Timing belts replaced recently , upgraded Bilstien suspension , Power Chip upgraded ECU , Larger throttle body , Cold air intake , New front brakes , Quick release Sparco steering wheel , Sports exhaust , external hold down / locking bonnet latches , comes with original steering wheel and

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL

R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also avalable at extra,Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage cams apro