SSR Enabled
Australia's #1 Enthusiast & Motorsport Marketplace
Australia's #1 Enthusiast & Motorsport Marketplace

1,902 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum

Featured ads

All Results

3
Brembo 8 pot calipers/ 380mm discs & pads front; 4 pot calipers/350mm discs & pads rear, with Chev hats ( easily changed for other application). New / never used. Unfinished race car project.

Mornington VIC, Australia
Share
Watch
7
Roll Cage
Log Book
2002 Chenowth Millenium class 10 buggy Rebuilt mitsubishi 4b11 engine making 210hp @9000rpm Albins 6 speed 11.5 sequential transaxle 934 cvs with modena engineering 33 spline axles Link fury ecu and AIM pdm with display and keypad King shocks tuned by MCA suspension with adjustable canisters Howe powersteering rack Gearone mid board hubs Raceline wheels fitted with mickey thompson tyres The car is a competitive with some good results, ready to race the 2026 season To see in action check

Cooroy QLD, Australia
Share
Watch
10
Race car transporter can fit 3 cars Dhollandia 2.5 ton hyd tailgate lifter. Top floor is 9.7 mts with 5.5 mts that can be lowered another 300 ml which will give 1500 ml. Bottom deck is 5.5 mts long for cars if work bench’s are removed. Trailer has two double bunks and two single bunks. Shower toilet kitchen and lounge. Fully air conditioned. 240 and 12 volt power This is brand new build by frontline trailers on a vawdrey trailer with bpw air bag suspension disc brakes and 10 stud alloys. 1000

Mackay QLD, Australia
Share
Watch
5
Roll Cage
Log Book
Motorsport Australia Log Booked No 20220118 3E Series Production with full MA Approved ($4500) Roll Cage, 6 x 17" Mags, also 4 x 18" Maggs with a lot of suitable tyres, New fully adjustable coil overs on all corners, 5 speed manual, Race seat, and 6-point harness Electric battery cut out, new fire extinguisher, new large intercooler, ($1200) flash tune, high intensity rain light, motor gearbox etc perfect only traveled 85000Ks the car can be run in Aus Production Car Series, IPRA, Sports Sedan S

Nelsons Plains NSW, Australia
Share
Watch
7
This is a great duel purpose car trailer, the enclosed section can be removed in 15 minutes. Being a Single axel it is very easy to manoeuvre, it has just been fitted with new 8ply light truck radial tyres. Internal dimensions as follows, length 3450mm, width 1520mm, hight at front 810mm, hight at rear 1400mm. External dimensions as follows, length 4550mm, width 2040mm. Included in the sale, aluminium loading ramps 3450mm long x 225mm wide, electric winch, ( no battery ) External awning to park

Coffs Harbour NSW, Australia
Share
Watch
10
Roll Cage
Log Book
Spectrum 07 formula ford ( $23000 less motor ono ) Ex Steve Owen , mark winterbottom raced car . Very good condition, lightly raced in the last few years . Lots of new parts , new refurbished bell housing , new 014 spectrum radiators , new water pipes , , Motec dash , new slave cylinder , new clutch plate , lots of spares ( wishbone , steering arms , nose cone , nuts and bolts to suit etc , spare full set of wheels and tyres . Stringlined , balanced , and dynoed . Ready to go racing . $30000

Warragul VIC, Australia
Share
Watch
18
NEW 2025 HNS 6.5m Enclosed Tri axle Internal floor length is 6.45m trailer external full width is 2495mm width between mudguards is 2005mm drawbar length is 1.5m internal height is 2.2m GVM 4500kg Tare 1950kg Chassis and drawbar at 150mm x 50mm x 5mm X 450gr RHS duragal Steel 4mm Automotive spec Aluminum Cladding walls, high gloss white (flexible core) 1pc fiberglass FRP roof LED autolamps tail lights and clearance lights throughout the entire trailer load sharing greaseable suspension ( 620

Pyalong VIC, Australia
Share
Watch
21
This Nissan LZ 20 B Works Engine is in parts ready to be assembled. All of the respective parts are in excellent order and are all original Nissan works components. For example, the twin cam head has been fully refurbished by an engineer who is well known for working with rare and historic competition engines. There are numerous photos of the engine and its parts, only a few have been listed. Further photos can be emailed. This is a rare opportunity for an enthusiast or collector who is look

Black Rock VIC, Australia
Share
Watch
4 1
Roll Cage
Log Book
Race Winning Formula Ford Prepped and ready to race. DELIVERED INTO VIC 2024 Season: 4 Race wins 1 Pole 6 Podiums 2 Round podiums Clean sweep at sandown. Race win at Bathurst. Double podium at Winton. 2025 Season: Car ran 2 test days at Symmons plans. Parts: • 2 full sets of wheels Plus extra fronts and rears • Springs, roll bars and ratios for all Aus and Vic Formula Ford tracks PLUS extra used dog rings • 2 nosecones, 1 on car and 1 spare • Spare used brake pads and clutch plates •

Newstead TAS, Australia
Share
Watch
24 1
Roll Cage
Built by Reliance Automotive Services in Canberra to compete in bitumen road rallies using tge highest quality components. Tge build philosophy was to create a vehicle which could be serviced within the allowed time in the rallies. Items such as fuses are not concealed but are mounted visibly for quick access. Internal wiring is also installed to be visible. The suspension was built to have the maximum travel and excellent compliance to cope with all road surfaces from smooth to very rough, wet

Fyshwick ACT, Australia
Share
Watch
21
Tarmac rally car with fully welded PCD cage,MC Gold suspension Upgraded exhaust and front brakes Oz racing rims 18” Cobb tune Stilo integrated intercom

Ainslie ACT, Australia
Share
Watch
31
Registered
1990 VR4 built by Jamie Drummond to group A specs. Rallied by Graham Alexander in the ARC 1990-1997. Upgraded to EVO specs, Group A brakes, bigger drive shafts, green front hubs, front LSD, 80 litre fuel tank, Albins dog gearbox. Maintained regardless of cost. Current log book. Multiple spares. Had major rebuild early 2000’s @ $50k only done 3 events since. Call 0418521309

Barrabool VIC, Australia
Share
Watch
7
Genuine DJR cosworth Sierra Block standard bore ( small repair needed on main journal . Block complete with caps and Pistons . Head studs missing . Complete Distributor and Throttle body

Runaway Bay QLD, Australia
Share
Watch
17
Registered
This 2013 Ford Mustang Boss 302 ‘Laguna Seca’ is 1 of 262 manufactured by Ford in School Bus Yellow and 1 of 765 manufactured by Ford world wide (with 2 known to be in Australia with this Laguna Seca being one of the last 22 produced). This Laguna Seca currently has 13,146kms from new and has been served every 12 months regardless of use. This Laguna Seca was delivered with the Boss 302 car cover, Boss 302 floor mats, front splitter, red track key, owner pack including a letter from the Ford P

Hamilton QLD, Australia
Share
Watch
8
Log Book
Tickford Mygale Duratec Formula Ford, professionally prepared and maintained by the Mygale factory Australia. This beautifully presented car has the full colour Motec C125 data logger installed with all required sensors. Engine rebuilt two race meetings ago, shocks maintained and tested on G-Force Motorsport Rohrig tester. Gearbox fully rebuilt including new CWP and carrier. New fuel bladder fitted. All bearings toleranced and upgraded from standard. Lightweight bodywork with stainles

Braeside VIC, Australia
Share
Watch
15
Isuzu Dual Cab 1989 (motorhome rego) 7-seater Current COI KLM – 358,363 (original) Front and Rear Drop-down screens Hands Free Interior Sound Deadener New Tyres No Rust Turbo-sits on 100/110 easy. Accommodation Lounge folds into DBL Bed Airconditioning, Kitchen Cupboards, Microwave, 12v fridge and TV 2 way door between accommodation and rear Rear Fits Super Sedan/Modified 5030 long x 2350 wide plus Bench and Sink 470mm 10 Super Tyres – 14 Modified Tyres Compressor, Generator, Winch all normal S

Alice River QLD, Australia
Share
Watch
15
Log Book
Ford escort mk2 Rs2000. Matching numbers cars. The car has been stripped by the previous owner and a walker chassis roll cage installed. The car is how it sits in the photos. No interior. Really good floors,a-pillars etc.Has the usual spare wheel rust holes and rear quarters. Bodywork/paintwork is average . Ideal car to continue a race/rally car build or convert back to a road car. Has clean SA walking registration.

Renmark SA, Australia
Share
Watch
12
Reduced from $45,000, now down to $39,500. Perfect for TA2 and Trans Am cars, plus any wide body race cars. Fully wired for 240volt plus roof mount solar panels to charge x2 deep cycle battery. X2 TTI tool boxes one with tools other for storage. Recent chassis upgrades plus upgraded axels to Huntmans 6 stud hubs. Near new 10 ply Tyres. Winch’s operated with remotes to make loading easier.

Hope Island QLD, Australia
Share
Watch
5
Up for sale is this 1 of 1 Super5000 racecar. Designed in South Australia by Oscar Fiorinotto’s Supashock Racing Engineering, the carbon fibre monocoque chassis was fitted with a Supercars 5.0 litre V8 engine and Albins transaxle gearbox. This amazing open wheeler comes complete with Motec M150, Motec PDM30, Albins transaxle, AP pedal box and calipers and a large amount of spares including body moulds, No engine. Check the link below to see the official launch. https://www.supercars.com/news/sup

Dandenong South VIC, Australia
Share
Watch
11
Log Book
For Sale or Lease: Mygale SJ12a Formula Ford Australian National Championship Winning Car – Jack Le Broq, 2012 This Mygale SJ12a has been meticulously prepared and maintained by CHE Racing since 2018, making it a race-ready, championship-proven machine for the upcoming season. Key Features & Upgrades: Engine: Brand new 0km engine installed for the start of the 2024 season. (Not raced in 2025) Only 2,500km since rebuild, with oil changes every 250km Spare second-hand long motor included B

Nowra Hill NSW, Australia
Share
Watch