167 Ford Car, Bike or Kart for sale

This meticulously restored 1954 Chevrolet Cab Over Engine (COE), crafted by Matt Stone Racing and valued at approximately $200,000, is a true gem with impressive modern features: - The restored 1954 cab and reproduction tub painted in metallic Hot Lava Orange sits on a Chevrolet C20 pickup chassis and has been professionally converted to right hand drive. - The engine is a 2022 model 6.2-liter LT1 V8 engine producing 343kW of power and 881Nm of torque. - The automatic transmission is a 20

This one of a kind Formula Ford Swift DB1 is a unique masterpiece and a proven winner in the historic motorsport landscape. This Formula Ford Swift DB1 comes with a number of spares and and extra set of wheels, along with gearing a much more. In the past this car has been run and won with Anglo Australian Motorsport and Barton Mawer Motorsport. The car itself has won races, podiums and pole positions in the hands of Daniel Holihan, there is only 3 of these cars in the country and is a proven w

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

1972 Ford Ranchero Hi performance 460 big block, C6 auto transmission 2800 dominator Convertor, Strange 9 inch diff trutrac 3:7 gears, 35 spline Dutchman axles. Custom Tailshaft, vintage air A/C, auto meter gauges, Kenwood sterio system offers 6x 9 speakers. Lots of new parts too much to list here. More than $90,000 spent on car. A unique car to own in Australia. This thing is fast and turns the tyres so easy.

This is a great looking car that gets attention everywhere it goes. This car is set up for hillclimb and lapdash event, not Legend Racing. but could be returned quite easy if wanted to competed in a Tri-Series competition lapdash at Tamworth (21 - 22 May 2022). It has been modified beyond Legend racing specs. Obviously it has wings front and rea, it also has a full floor pan with skirts. Running soft slicks with little wear and plenty of runs left in them. Has a second set of rims with wets tha

1989 2wd Sierra Sapphire Cosworth Delivered in September 1989 at TCH Sheffield Purchased by owner no.2 in 1993 from Specialist Cars in Micheldever who kept it in the UK before shipping it to Australia in 1999. It was then sold to owner no.3 in 2009 then sold to owner no.4 a few years later. I purchased the car in March 2017. The car has a folder full of history going back to the early 1990’s with a history report from TCH dating from November 1989. 73,000 miles Fully rebuilt engine. All compo

1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

E36 coupe S50 B32 M3 motor, Zf 5 speed, locked diff ,Tilton clutch, two sets of 17 “ wheels, one brand new set of Yokohama AO50s, Ford front brakes, new AGI bolt in 6pt cage, power steering, swirl pot, thermo fan, Craig Davies thermo switch, just getting log booked. Times on Nankangs and Federals: Phillip Island -1.49.7 Sandown 1.21.9 Would get better times with the AO50s, photos help description.

Caged to CAMS rally spec 2ltr Zetec 200hp piper cams Jenvey fuel injection Emerald ECU PWR radiator 2x gearboxes. 1 x T9 5 speed( new ) and T3 4 speed Wilwood front brakes Compression struts Atlas diff 2 link plus panhard rod GAZ shocks Capri front struts AVO steering wheel All instrument fiber glass dash 4 Rebel wheel and 4 Hustler wheels RS200 decal kit and badges Just about everything needed

1 Owner 49,**** Kms Race Red 6 Speed Manual Herrod Performance - Compliance Pack 670HP @ the Flywheel (minimum) Roush/Ford Racing R2300 2.3L TVS Supercharger Large Air-to-Water Intercooler System Oversized, Full-Face Low Temperature Heat Exchanger Degas Bottle High-Flow Rate Fuel Injectors Custom Aluminum Fuel Rail Formed Molded Hoses Twin 60mm Throttle Body with Matching Spacer Custom Cold Air Induction System Washable, High-Flow Dry Air Filter Heavy-Duty, First Sheave FEAD System Roush/Ford R

Ford Capri Drag Car Super Sedan or Top Sportsman car. 427 Ford Windsor, 2 speed glide, Full chassis 4 link rear end. 9 inch, 35 spline spool & Mark Williams axles, Strange front & rear brakes, new radiator, MSD power grid ignition. Racepak data & dash, pro cube delay box, fire system, all new tyres, new paint, fibreglass complete front clip, Too much to mention Car is very consistent over the 1/8 mile & 1/4 mile. Andra & ihra current tech's Car is in excellent condition Not getting out of the

Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.

Mk2 Ford Escort 2lt, log booked, worked 2ltr pinto, forged ceramic top pistons, cosworth rods, twin 45 Webber's and much more, for full details contact Steve.

This is the second Sylva track car that I imported from the UK and built here in Perth while acting as the Australian Sylva Autokits agent between 2008 and 2014. The first build was a bright orange Sylva Riot, now owned by a very happy second owner that can verify the reliability and quality of the first car. This second car, known as a Sylva J15 is essentially the same chassis as the Sylva Riot but has more triangulated structure along the sides to support the more streamlined GRP body. The c