25 Modified with Roll Cage for sale

Track car for sale! Left-hand drive - 2007 GT500 signed by Carroll Shelby half roll cage custom interior with racing seats and harnesses. Short shift Battery relocated to boot to allow room for intercooler header tank. A/C delete kit custom tubular cross brace/engine support. Custom front racing suspension chassis strengthening custom racing rear suspension and differential 6 speed tremec aluminium drive shaft 6 pot Bayer brakes on all corners Ford V8

Six speed manual. Log booked. CAMS approved roll cage. Excellent condition. Eligible for Group 3E Production Cars and Group 3J Improved Production Cars. Spares tyres included. Endurance fuel tank. Rear axle is a standard 188mm crown wheel version, ratio is 3.46:1 (standard), centre is a locked diff. The rear cover has been modified for a diff cooling setup that has been removed. Front suspension has height adjustable coilovers, Whiteline sway bar with adjustable link, and camber plates. Brak

2007 Ferrari F430 Challenge Race Car - Private Collection - Bianco - ONLY 21,000klms - ONLY 142 Challenge F430's Ever Built - Raw *** TRACK CAR ONLY CANNOT BE REGISTERED*** We are extremely pleased to offer you this very special opportunity in securing of one of the rawest best driver-focused track cars ever produced from Ferrari. This 2007 Ferrari F430 Challenge "Track/Race/Club" car developed by Ferrari Motorsport for the F430 Challenge race series around the world and is a true track-focuse

125 Wb weldwell dragster 383 sbc, power glide , 9 inch Competitive in modified class 8.3 et complete set up Trailer , spares Call for more info

One of the original 4. Includes over $40k of spares (Will not separate). Lightweight 1220kg, Biggest brakes in Group N. Fibreglass front and rear fenders, bonnet, doors, boot and bumpers. Dennis Johnson built 289ci. 1 meeting old. 400++ ftlb, 500+ hp - Dyno sheet to purchaser. Ford Motorsport 302 Boss 4 bolt competition block, steel crank, RHS heads, Jesel valve gear. Jesel external adjustable Belt Drive. Canton Auccusump with auto-valve. System 1 -12 oiling system. Pro Sys custom (Holley) 4 ba

Mx5 RACE CAR 1991 NA THIS VERY WELL KNOW RACE CAR IS NOW FOR SALE. 2B LOG BOOKED EVEN THOUGH THE CAR HAS BEEN AROUND FOR A LONG TIME IT IS NOT AN OLD CAR. APART FROM BODY PANELS, VIRTUALLY EVERYTHING HAS BEEN REPLACED AND / OR UPGRADED AS PART OF AN EXTENSIVE MAINTENENCE SCHEDULE. OURRIGHT WINNER OF THE CUE ENDURO SERIES MANY CLASS WINS INCLUDING LAKESIDE, QUEENSLAND RACEWAY, MORGAN PARK AND PHILLIP ISLAND. ALSO RACED AT BATHURST. VIDEOS AVAILABLE FOR ALL CIRCITS. ENGINE LAST FULL REBUILT IN 2

2006 FPV DRIF6 – The Original Factory-Built FPV Drift Car Offered for sale is one of the most significant and recognisable vehicles ever produced by Ford Performance Vehicles Australia the original FPV DRIF6. Built by FPV and Prodrive Australia as a one off promotional and competition vehicle, DRIF6 was created to showcase the capability of the FPV F6 platform in Australian drifting competition. The car was publicly unveiled in 2006 and subsequently campaigned in the Australian Drift Champions

Renault Clio 172 | Rotrex Supercharged | 195hp ATW Track Car Yeah I know it’s different, but who wants to be the same as everyone else. Another price reduction...the value just keeps getting better! The brakes, supercharger and diff cost way more than this! A few weeks ago at Lakeside my son in his first ever drive of the car did a 60.6 sec lap, at 200 km/h through the kink. How fast could you go? Renault Clio 172 track car. Rotrex-supercharged, 195hp at the wheels, approximately 900kg, Qu

This thing started life as a sweet, innocent Mini. Now? It’s been lovingly modified with a shortened WRX subframe. Think backyard motorsport Frankenstein made from a mix of wild decisions and good intentions. It’s running a Subaru motor with all-wheel drive, not because it made sense... but because I needed a reason to smile again. It’s sitting on BC Racing coilovers, adjustable enough to suit whatever chaos you’re into. Tyres are fresh, they’ve basically just had a nap. The exhaust absolutely

ford Mustang GT Mach 1 built by Ryan Mcloed was on pole for 2022 Bathurst 6hr it has 4 camera system Sparco seat on Ricaro adjustable slide 100 ltr premier fuel cell FAI approved Brembo billet brakes 378 Brembo rotor modified rear brake calipers with floating rotor Murray Cootes Gold shocks big range of eibach springs included new Mach 1 spec engine with boundary oil pump Mahle pistons Manley rods psi valve springs epoc multi angle valve job ATI balancer dynoed by roger Higgins new Suncoast 10

FOR SALE ONLY DUE TO MAJOR HEALTH REASON. This Challenger is probably the best value TA2 on the market with the time wait, and cost of a new Challenger. Car was fully rebuilt in August 2023 with a new chassis after a rollover of our 2022 car earlier in the year. Has completed only 3 race meetings and 2 test days since, with no accident damage. Comes with major upgrades, including, new aero spec front nose cone. New Tilton multi plate clutch. Upgrade tail shaft. Solid axles. Engine cooler reposit

Parts on the buggy are - shock therapy springs tuned south down Motorsport. - Engine tune by Chapmans off- road - Rev range cage modified for extra cross braces - Belt temp gauge - Clutch springs for more power delivery - Method race wheels and 32” tyres -Custom secondary fuel tank and transfers pumps -Grc from shock brace • Braced rear trailing arms •Sbh rear arms with heims • Aftermarket front arms can’t remember brand •Intercom and helmet blower Trailer included with spare parts and extr

Offered for sale after an extensive ownership period is James Brock’s Bathurst Tourer 300-winning Commodore. Originally a VP Commodore race body shell, this car was first built as an AUSCAR by Melbourne-based business owner Greg Stevenson to race as part of the Australian Super Speedway Championship. It made its race debut at the Thunderdome in December 1991 and was raced as the #03 Goodyear Commodore by the late Peter Fitzgerald. In Fitzgerald’s hands this car finished third to Brad Jones and

2024 VRC championship winning car in its first season. Fiesta G4 light weight fiesta shell using a M-Sport engineered load path cage with Dytko wrc inspired fibreglass body. Currently on 2024 minimum weight of 1270kg with heavy sump guard, full aluminium underbody protection & other heavy parts purposely put on the car to make minimum weight and adjust car balance. Can be easily brought down to the new minimum weight. Tubular stainless high mount exhaust manifold. Running individual EGT s

FN 2020 Mustang Production Car - MA 2024 log book. BRAND NEW BUILD Built originally to compete in 2024 B6H but due to circumstances the vehicle did not compete and has never been raced or put on track. Still has plastic on seats, steering wheel etc. Complete turnkey vehicle ready for competition - prepared to the highest standard by RM Racing cars with no expense spared. Inclusions: - 10 Speed Automatic Paddle shift - PWR Radiator and Transmission Cooler -50 Row engine Oil Cooler - 3’ Sta

A rare opportunity to pick up a fully specced time attack project that just needs the finishing touches. The hard work and money have already been spent—take this beast, finish the final 5%, and hit the track with a weapon built to dominate. After years of building and over $100k invested, it’s time to accept I won’t have the time to finish this incredible project. So here’s your chance to jump in and take it across the finish line. I originally bought this 180SX with dreams of creating a 300r