32 SEAT Car, Bike or Kart for sale

1999 Lexus IS200, now an IS600 with L98 Chev 6 litre V8 (ex VE SS) rebuilt 2022. Lots of info available about internals, but briefly has forged pistons, H beam rods, Crow street cam, tuned to a mild 375 RWHP. T56 transmission with short shifter and IS300 diff. Canton 7 litre baffled sump. Car originally built by Mark Palmer at C Red. Fully registered, engineered and has permits for engine and trans. Willwood 4 piston calipers on front with 323mm Supra TT ventilated discs. Expanded calipers on re

Looking for the ultimate combination of power and style? Look no further than this 2007 Ford FPV F6 Typhoon BF MKII. One of only 300 examples ever produced. The F6 R-Spec Typhoon achieved its intent with a bespoke suspension setup, specifically tuned to the mass of the six-cylinder super sedan. Front damping rates were a key focus, the goal to improve turn-in response while retaining ride quality. ‘Dark Argent’ ss19-inch alloys and a rear spoiler lifted the exterior, along with specific badging.

Muscle Car Warehouse are proud to offer for sale this 2002 Ford AU Falcon Pursuit 250 Ute with only 39 kilometres!! Never registered and kept amongst private car collections from new. One of just 248 examples ever produced each with their very own hand built 5.6 litre stroker Windsor V8 engines. This one finished in Silhouette Black and leather trim with factory optioned Brembo brakes and hard lid tonneau cover. Still has pre delivery plastic on the driver’s seat and carpet along with the steer

One of the original 4. Includes over $40k of spares (Will not separate). Lightweight 1220kg, Biggest brakes in Group N. Fibreglass front and rear fenders, bonnet, doors, boot and bumpers. Dennis Johnson built 289ci. 1 meeting old. 400++ ftlb, 500+ hp - Dyno sheet to purchaser. Ford Motorsport 302 Boss 4 bolt competition block, steel crank, RHS heads, Jesel valve gear. Jesel external adjustable Belt Drive. Canton Auccusump with auto-valve. System 1 -12 oiling system. Pro Sys custom (Holley) 4 ba

Prompted by some rally success, courtesy of “Quick Vic” at the 1966 Tour de Course and the fun fact that Porsche loves racing, the “road use” only 911 lasted two model years, Renn-version free, before Stuttgart’s finest (Namely Herr Huschke von Hanstein) commissioned what was to be, the iconic 911R. Porsche wanted to compete in the sub 2L GT FIA category, they knew that light and nimble were the key elements needed to get the job done and at those points, they shone. Getting the right amount of

2004 PORSCHE 996 GT3 RSR 1/3 Factory Porsche Lightweight Yukos Freisinger Motorsport / 2004 FIA GT Championship The Last Known Surviving Lightweight Still on Its Original Shell Verified by Manfred Freisinger/ Porsche Factory curators. Rarest 996 Configuration Seam-welded chassis, advanced suspension system, brakes, and more. Still in Period-Correct YUKOS Livery with Matching DMSB Wagenpass Retains original race colours and official homologation papers A Survivor of Greatness. An Opportu

1969 Porsche 911 E, coupe (non sunroof) 2.0L MFI in it's original factory colour of 'Irish Green'. I purchased this car as an extensively prepared front running Group S historic race car and have continued to further develop it both mechanically and cosmetically. Body: Original 1969 LWB narrow body early 911. Ex US car, LHD. Bonnet, rear decklid & lower valances all freshly repainted. Glass front windscreen, plexiglass to side & rear windows. Fibreglass front & rear bumpers (originals included

Built in the spirit of true muscle car racing and inspired by the mighty aero warriors that thundered around America’s big ovals, this machine is all about purpose. Taking cues from one of the greats – Lee-Roy Yarbrough’s #98 Mercury Cyclone long nose with spoiler – every detail pays homage to a brutal, no nonsense era of racing. From the iconic Gurney rear wing to the brushed aluminum door panels, the goal was clear: capture that raw “good ol’ boys” feel – as if the car had gone straight fro

MY23 Porsche 992 GT3 Cup Car, delivered new to Porsche Carrera Cup Australia for the 2024 season. The car has been meticulously maintained by Earl Bamber Motorsport since its arrival in Australia. The car received a new chassis in October 2025 and has since only covered 15km at a shakedown event. The engine and gearbox have covered 44.5 hours / 7020 km since new. The car comes with a full life schedule from delivery. Expiration dates: - Belts end 2028, - Seat end 2031, - Window nets end 2028

Hi, I am looking for a front bumper complete for a Mark 1 997 cup car as pictured. Also chasing other items as listed. Tail lamps Rear bumper Brake discs Lower steering column panel Passenger seat setup with belts Jack stands to suit air jacks

MY17 Porsche 911 991.2 GT3 Cup Car, originally delivered and raced in Porsche Carrera Cup Asia season in 2018. Imported into Australia in 2021 and debuted in the 2022 Porsche Michelin Sprint Challenge season with Ryan Wood as the Team Porsche New Zealand x Earl Bamber Motorsport Scholarship car. The car received a new chassis and engine for the start of the 2024 season and has since covered 6668km / 43 hours. The gearbox underwent a major service at Holinger in June 2025 and has since covered 1

ford Mustang GT Mach 1 built by Ryan Mcloed was on pole for 2022 Bathurst 6hr it has 4 camera system Sparco seat on Ricaro adjustable slide 100 ltr premier fuel cell FAI approved Brembo billet brakes 378 Brembo rotor modified rear brake calipers with floating rotor Murray Cootes Gold shocks big range of eibach springs included new Mach 1 spec engine with boundary oil pump Mahle pistons Manley rods psi valve springs epoc multi angle valve job ATI balancer dynoed by roger Higgins new Suncoast 10

Ford Falcon EL race car, fully stripped interior, cage, race seat, quick release wheel, fuel cell in boot, 6 pot AMG front brakes and 4 pot brembo rear brakes, straight 6, 4lt, fresh 5 speed box. Car used for budget enduro events. Includes spare engine and other mixed spares. Rear brake bias adjustment added.

1999 Porsche Boxster 2.5 – REGO ON HOLD Built in 2021 for the Pirelli Porsche NZ Championship (Class G) with road-legal potential for Targa/road rally. Factory hard-top with heated glass rear screen. Powder-coated OEM rims (6x front, 6x rear), 2 sets Nankang series tyres + Pirelli wets Stud conversion, H&M 30mm lowering kit Bilstein B8 shocks, GT3 adjustable LCAs WEVO semi-solid engine + trans mounts Bump stop kit Upgraded front “S” brakes Vented/slotted rotors F/R Reconditioned calipe

1973 Ford Mustang Race Car LHD Full Roll Cage Rebuilt Hercules 351 V8 Engine (started, Never Raced) Top Loader 4 Speed Gearbox 9-inch Diff 18-inch Wheels and Tyres 6Spot front brakes large disc. The body is made of full steel, with no rust or bog, and all gaps are spot on; there is no evidence of it ever being in an accident. Has a Race seat. It doesn't need much more to get it on track. All new shocks and sway bars, New Exhaust system, has a new Petrol Tank 4 Near New Yokaharma Ao50s.

This 2013 Ford Mustang Boss 302 ‘Laguna Seca’ is 1 of 262 manufactured by Ford in School Bus Yellow and 1 of 765 manufactured by Ford world wide (with 2 known to be in Australia with this Laguna Seca being one of the last 22 produced). This Laguna Seca currently has 13,146kms from new and has been served every 12 months regardless of use. This Laguna Seca was delivered with the Boss 302 car cover, Boss 302 floor mats, front splitter, red track key, owner pack including a letter from the Ford P

Selling my 2000 1.8 Turbo U3L IPC beetle. Can be left as an IPC car with turbo restrictor or you can take the restrictor off and put into the street car category or targa rally car. List of parts below: 1.8 20v, small port intakes, OEM forged internals.Turbo engine out of a GTI MK4. KW coil overs, fully adjustable. ECS engine mounts Brand new steering rack Brand new Xtreme button clutch Brand new DBA rotors and MU project pads. Targa compliant (national) role cage by Brad Stacy. Motorsport A