43 items for sale

VY Commodore track/hillclimb/ club car for sale. Freshened up motor some years ago, with very little use since. New bearings, 232/232 cam, upgraded valve springs, and some cylinder head work. 3.7 truetrack diff, VTTR racing 6 piston front brake callipers with 340mm rotors and braided brake and clutch fluid lines throughout. Cold air intake and extractors. KS racing coil over suspension fitted. 6 point bolt in AGI rollcage. Car is not logbooked. The car could be very competitive with some fine t

Vl commodore, turbo motor, agi bolt in cage, truetrak diff with big spline axles, 2 sets of rims one set with full slicks, currently logbooked car has not been to modified that it couldn't be put back to a road car

This car was a new build in 2024 and is Improved Production log booked but is eligible for and would be a very competitive in other categories the likes of QTCC, Replica Tourers, Commodore Cup and Tin Tops to name a few. With the car only having done 5 race meetings since build the L98 LS2 engine has done little work since build and the Samsonas Sequential gearbox is brand new. Engine specs and fitted equipment as per below: * Harrop DBW - 8 x Throttle body injection * NXTGEN Heads (Tremanic

1988 Holden VL commodore great club or track car Bilstein suspension, coilovers at the front At the front has vt brakes twin piston Rear disc brakes Brake bias Locked diff Exstractors Cam Great beginners car been sitting for a long time car does run and drive tires are old and could do with some new fuel as it’s been sitting Has slight hail damage

Honda civic type R FK8 production car Motorsport Australia Registered National Spec Roll Cage OS Giken LSD HKS Hipermax IV SP Coil over Suspension Blitz Racing Radiator Type ZS AHS Oil Intercooler Extreme Performance Motorsport Clutch AP Racing Custom PRO5000R BBK CP9665 Calipers VSPEC Turbo Back Exhaust System Upgraded Deatschwerks DW300C Fuel Pump 9 x Koya SF03 18'' x 9'' Rims ET 45 PCD 5 x 120 CB 64.1 > FIA Rain Light Race tech 4100HR Race Seat > Sabelt 6pt 2/2 GT Enduro Red Harness

VB Holden Commodore Manual V8 Roll Cage Not registered Great track day car or base for a restoration of the first model Commodore. We bought it a couple of years ago and has been in storage ever since. No visible rust, body in great condition 6 x wheels New Bridgestone tyres never used. New Momo steering wheel Engine Runs nicely, sounds great! clutch pedal may need attention. No test drives, can’t be driven on the road. Price is firm as it reflects fair price.

Originally the championship winning BHR Commodore with QTCC, now running the famous Jack Daniels livery this VE has been a consistent and reliable podium car across QLD tin top categories. A strong LS3 originally built by SPAE and freshened up by Suncoast Mechanical in 2023. The car has seen little use since and as such is now being offered up for sale. Coming off the dyno after run in and a tune check showing 514 RWHP. A Dailey dry sumped car with Peterson tank and electric power steering. A ne

Originally a Factory Prepared Production Racecar prepared by Honda for "Young Guns" at Gold Coast Indy 2000 Year 2000 $55,000 ono Log Book 3J Improved Production This car has a rather interesting history, but more of that later. It is also a proven winner in the hands of Jordan Cox, Harrison Cooper and more lately, Ben Riley. A change in family circumstances has meant it is probably best for us to put the car up for sale The Car: Engine. B20. Freshly rebuilt by Pace Motorsport for 2

I HAVE CHANGED THE ADD THE 15K PRICE IS ROLLING SHELL WITH WHEELS AND SEAT MOUNTS RADIATOR AND KSWAP MOUNT KIT AND ALL OTHER SUSPENSION NO SEATS, NO ENGINE OR GEAR BOX NO IC7 NO ECU NO SHIFTER or $28k with everything HAPPY TO TALK AND NEGOTIATE ON THE PARTS NOT INCLUDED WITH SALE, THIS IS A CLEAN STRAIGHT SHELL READY TO USE FOR MOTOR SPORT there are over 100 videos of the build of this car on my youtube channel "turbotristan " if you would like to search it up car is mostly carbon fibre

Pic for attention. Looking for a VB-VL V8 Commodore Rally Car that's turn key or close to. Must be well built, Log Booked and preferably have a National spec Cage. Will consider other Cars with a budget around 50k or so.

I have my VF Holden Caprice has done 92,XXX ks car is almost brand new and in immaculate inside and out side is in great condition aswell few stone chips at front other then that nothing major (can be fixed for right sale price) i have spent upwards of 95k on build so far, and have only had the car for 2000ks since finishing the build, a great solid set up as follows: PARTS: - 227 224 , 114 lsa boost bald eagle cam shaft texas speed - Pac valve springs with locks retainers and valve steam seal

What started out as a mild build for racing escalated over a few years. Capable of a 2:10 lap on The Bend International Ready to race 3J Improved Production Car with weld in homologated roll cage Logbooked Civic FD2 Type R (Road Registered) Blueprinted engine build from O/S with motorsport wiring loom and Emtron SL4 ECU K20A engine with Today A2 Cams. Custom SS304 Exhaust, Toda headers Current Kms on engine 3500 Carbon cold air intake Fresh rebuilt Quaife 5 speed sequential with new OS Giken LS

Sports sedan 3D log booked 1020kg w/o driver 450whp National spec roll cage with front tower reinforcement, tubbed front and rear arches and custom front end crash bar K24 2.4L engine swapped with K20 custom ported head, Pistons, rods, balanced crank, cams, valves and springs. MCA custom valved shocks by DNA motorsport Full rose jointed suspension arms Motec suite of electronics with full milspec re-wire by Prowire with DBW throttle w/flat shift Custom ratio 6-speed dog box with Hollinger loa

Honda crx delsol. B16a2 fully rebuilt with 20tho over 13:1 carillo forged pistons and rods, acl race bearings, cosmetic mls head gasket, crank shaft crack tested and polished, block bored, torque honed and decked. New high volume oil pump and morosso large capacity sump. Pcv delete kit fitted with custom made catch can and large lines and an fittings . Head is ported with kelford cams, kelford adjustable cam gears, kelford valve springs and retainers and runs a custom made intake manifold with 4

HISTORIC FORMULA FORD BUILT IN 1969. This pretty looking car was built by Brian Andrew an ex Chequered Flag mechanic and raced successfully by him in the inaurgural Formula Ford race in Australia. It was imported into New Zealand by Michael Pearse who raced it here in 1970/71. After Michael's ownership the car passed into the hands of a couple of chaps who used it for club events. It has been in my ownership since 1985. Probably the least raced F.F. In the country it even has the original

For Sale 1990 Honda CRX Si D16a8 Engine (1.6L) Extractors into Straight Though Thick Wall Pipe with hotdog and muffler 5 speed Manual Log booked 6-point Roll cage Sparco Drivers Seat - No Passenger seat included with sale Sparco Harness Terra trip Rally meter with foot reset pedal Rally safe wiring all installed + Mounts DMS Gravel Suspension Hard race Camber arms front and rear 2 round old Dunlop Tyres + Another set of Honda Rims and 3 Brand New Kumho Muds New rotors + pads + Braided Lines all

Hi, For sale is my EG Civic track car. Selling as I have no time to finish it and need the floor space in the shed! - has a very nice fully TIG welded 6 point CAMS schedule J spec cage, see pictures - D16A8 engine with manual gearbox, comes with brand new engine mount kit to K swap (this was my plan for the car however engine was running fine before the cage build) - Mini light 13” rims with adapter spacers with formula ford Yokohama semi slicks mounted (cheap very good quality race tires read