59 Car, Bike or Kart for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
Ideal start for your track project. The BMW is in very good condition rust and damage free. It needs an engine rebuild with suspected rod bearing damage. Rebuild it or engine swap. Car is in Newcastle and whilst it runs it will need to be towed.
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
36
Registered
2020 Chevrolet Camaro ZL1 Coupe 10Spd Auto 6.2SC LT4 - 1 Owner - Build #0038 - ONLY 830klms from new - Highly Collectable HSV - Totally Original We are proud to offer to you this great opportunity in securing this highly collectable never to be repeated ''build'' #0038 Camaro ZL1, one of the first delivery Camaro ZL1's for the public allocation of 375 Camaros made for the Australian market through Walkinshaw Performance who made the ADR/conversions for the local market. This stunning and truly
40
Roll Cage
2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65
72
Registered
The best sports saloon....ever Commencing production in 2021 and listing a raft of improvements over the already astonishingly capable M5 Competition, the M5 CS fast became THE ultimate M-Car and global production sold out instantly. Every single one of the only 20 allocated to Australia was snapped up as soon as BMW confirmed availability in our market. Fortunately the car lived up to the hype with the CS being even that much better than the Competition on which it was further honed and revise
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
51
Registered
Towards the end of the F80 series M3, BMW had really got the formula right. Over 5 years of continual development and several iterations, each successive addition just tweaked and refined what was already a fine drivers car into something of a fine drivers weapon. The Competition was an immediate success and what most thought would be the pinnacle....and then the CS was announced. Taking everything from the Competition, the car was again refined and turned up and culminated in the car we presen
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
6
Roll CageLog Book
POLE POSITION!!!!! car from Radical Cup Australia Round 1 2024. 2020 Radical SR3 XX: $110,000 + gst Owned from new, run and prepared to the highest level by Volante Rosso Motorsport. This car has enjoyed race wins and podiums in it's short racing life with no accidents or required repairs. has 200km on GDU, 16hrs on engine and has had a new wrap for the last event. The car will be delivered ready to run. - Right hand drive - AIM smarty cam system - F1 Style Radical steering wheel with display,
15
Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
10
Unfinished BMW 2 Door Coupe sports sedan project Rocket Bunny Wide Body Kit fitted Ebay Coil overs New Rear adjustable camber arms ( Not Fitted) Hillside Motor sport Chassis Reinforcement kit front and rear Big Lock steering kit Hydraulic hand brake ( Not fitted) LS Engine plate and T56 gearbox mounts fitted ready for motor and gearbox NO MOTOR OR GEARBOX WITH SALE New 38 Litre Fuel cell and surge tank fitted Sound deadening removed Headlights and tail lights in box supplied with car Still have
10
Roll CageLog Book
"PRICE DROP" We are offering for sale the 2022 NSW Supersports Championship Winning Radical SR3 RS driven by Mark Brame. This car comes complete with 1 x spare set of wheels, (with various used tyres including 1 set of wets), on board air jack system, air lance, air jack safety locks, wheel nut socket, spare drive shafts, Smarty Cam system, Radio loom, High downforce front dive planes, and car cover. The car has been run and meticulously maintained by GFMS. GDU (Diff) has been recently been reb
18
Roll Cage
E36 coupe S50 B32 M3 motor, Zf 5 speed, locked diff ,Tilton clutch, two sets of 17 “ wheels, one brand new set of Yokohama AO50s, Ford front brakes, new AGI bolt in 6pt cage, power steering, swirl pot, thermo fan, Craig Davies thermo switch, just getting log booked. Times on Nankangs and Federals: Phillip Island -1.49.7 Sandown 1.21.9 Would get better times with the AO50s, photos help description.
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
7
RegisteredRoll CageLog Book
Chevy Love with V6 Chev engine, TH 350 gearbox. Ford 9” with nodular centre, LSD 4-11 gears. Brand new tail shaft. Good straight rust free body. Brand new rear tub and guards. Good street or drag race project. $6000 ono. Call for more information.
8
This BMW race car was built to a very high standard by Karl Begg in 2016, and then subsequently maintained and improved by Garth Walden and his gun team at GWR Australia continuously since my purchase from KB in 2017. Car has had an easy run under my ownership, competing only in the NSW PTC state championship from 2018 through to 2023 - with reduced appearances in the Covid affected years. Won B2 Class and second in the club championship in NSW PTC 2023. Very quick car in the right hands.