SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

48 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

6
Ideal start for your track project. The BMW is in very good condition rust and damage free. It needs an engine rebuild with suspected rod bearing damage. Rebuild it or engine swap. Car is in Newcastle and whilst it runs it will need to be towed.

Newcastle NSW, Australia
Share
Watch
14
Was $76,500$57,950
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Bendigo Victoria, Australia
Share
Watch
10
I am selling my beautiful Van Diemen RF 87 Formula Ford. Car is in Beautiful condition. Has C of D and has a good John Dean engine. Competed at Winton Festival of Speed 2023 where we finished 4th or thereabouts for the weekend. Car comes with some spares, pushrods, control arms and spare nose cone and nose box. Was recently restored and has all new brake lines and fittings. Motor has done 2 meetings. new rotors on the front. Gear ratios to suit all the tracks we run on. 2 set of wheels and tyr

Ocean Grove VIC, Australia
Share
Watch
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65

Sunshine West VIC, Australia
Share
Watch
14
Registered
Up for sale is this 2001 Nissan Skyline R34 GTT Coupe Manual in QT1 Pearl White, 144000 kms. This car has a lot of good modifications that would have it as an excellent circuit/track car - I have had it as a street car for the last couple of years and am finding more and more that I do not have the time to drive it nor the time to do the work to it that I would like. Option 1, take it as is at $58,000 and enjoy one hell of a street car - or option 2 have this R34 Skyline converted into a cage

Moorabbin VIC, Australia
Share
Watch
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.

Templestowe VIC, Australia
Share
Watch
5
Roll Cage
Log Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

Smeaton Grange NSW, Australia
Share
Watch
14
I'm selling my RF89 Van Diemen, Chassis number 1415, logbook number H3442 Historic car # FC155.15.18 I imported this car from France in 2020 from the historic race car company Espirit Competition (Laurent Forte). It was a project car for the owner and his son to rebuild. For most of it's later life (2002-2016) it was a driver training car for Manadien Racing in France, who was the original buyer of the car in 1989. I have raced it in 11 races along the Eastern Coast with a race win at Morgan Pa

Carlingford NSW, Australia
Share
Watch
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

Moorebank NSW, Australia
Share
Watch
15
Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),

North Rocks NSW, Australia
Share
Watch
4
Sold
$40,000
Roll Cage
Log Book
Championship winning Spectrum 011K as raced by Daniel Holihan. This car has multiple wins, podiums and championships to its name, along with a freshly rebuilt motor built by Luke Ellery from Ellery Motorsport down in Victoria. This car has been maintained by World Time Attack Champion Barton Mawer in the past and has a load of data and engineer tricks and tips to go with it. This car was built from the ground up only 2 years ago which was previously a Duratec raced by Tim Hamilton. It comes w

Brookvale NSW, Australia
Share
Watch
4
Roll Cage
Log Book
2017 Spectrum 015 freshly rebuilt and well maintained for the last 4 seasons by Altatek Racing. Fresh chassis, brand new floor, rebuilt shocks and clean, newly painted bodywork makes this a car that will be ready to go for anybody looking for a great car for multiple seasons in Australia's best development category. Vehicle comes with a Motec dash, Spectrum Penske shocks, 2 sets of wheel rims, ratios for all Victorian and key Australian Formula Ford Series tracks, a spare nosecone and various ot

Sunbury VIC, Australia
Share
Watch
10
Unfinished BMW 2 Door Coupe sports sedan project Rocket Bunny Wide Body Kit fitted Ebay Coil overs New Rear adjustable camber arms ( Not Fitted) Hillside Motor sport Chassis Reinforcement kit front and rear Big Lock steering kit Hydraulic hand brake ( Not fitted) LS Engine plate and T56 gearbox mounts fitted ready for motor and gearbox NO MOTOR OR GEARBOX WITH SALE New 38 Litre Fuel cell and surge tank fitted Sound deadening removed Headlights and tail lights in box supplied with car Still have

Upper Orara NSW, Australia
Share
Watch
4
The car was imported by Sir Jack Brabham for David Brabham to race in the 1986 FF championship,the car has been in my position since 1987, just recently been restored to original condition. Engine : has been rebuilt by Larner Engines Chassis: striped,sand blasted & painted All new alloy panels, uprights, gearbox, oil tank have been vapour blasted & treated New Rack & pinion Brakes overhauled with new discs Alloy wheels (6) fitted with new tyres New body work. The documents are currently waiti

Windermere Park NSW, Australia
Share
Watch
8
This BMW race car was built to a very high standard by Karl Begg in 2016, and then subsequently maintained and improved by Garth Walden and his gun team at GWR Australia continuously since my purchase from KB in 2017. Car has had an easy run under my ownership, competing only in the NSW PTC state championship from 2018 through to 2023 - with reduced appearances in the Covid affected years. Won B2 Class and second in the club championship in NSW PTC 2023. Very quick car in the right hands.

Sydney NSW, Australia
Share
Watch
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing

Marrickville NSW, Australia
Share
Watch
8
M3 // 04 GENUINE E46 M3 MANUAL 6 SPEED MA LOG BOOK. NATIONAL SPEC WELD IN ROLLCAGE. 9.5x18 race wheels, Yellowspeed c/overs, new factory clutch flywheel assembly, CSF upgrade oil cooler, Circo race pads. Production Car spec. A lovely road car prior to conversion. These rare cars are climbing in value being the last of the blistering 3.2 famous 6 cylinder. Best value M3 available.

Colo Vale NSW, Australia
Share
Watch
3
Log Book
Spectrum 012 well maintained car by Borland Racing Developments (Manufacturer of the Spectrum) who has prepared this car for every test day and race event for the last 3 years. Car is ready to race. Comes with a Motec dash, penske shocks, an extensive spares package, including 3 sets of rims , ratios for all the key Victorian and 2023 Australian Formula Ford Series tracks, in car radio comms and head sets. Car comes with quick lifts, low stands, wheel alignment bars and various other spares .

Braeside VIC, Australia
Share
Watch
15
Roll Cage
Log Book
2016 BMW M3 build by and purchased from Bruce Lynton Service team prior to 2022 Bathurst 6hour which was this cars first race and placed 4th in class. It has also won the 2022 Australian Production Car Championship. The car has been built and serviced with no expense spared and constantly developed to be a very competitive and reliable package as proven by its race results. Car Qualified on the front row for 2023 Bathurst 6hr and finished P2 only 2.7 seconds behind the winner. Car is fully pre

Kearsley NSW, Australia
Share
Watch
15 1
Roll Cage
Log Book
I have for sale my BMW M4 3E Production Race Car (No longer includes Bathurst Entry) Many wins and 3rd in 2023 Bathurst 6HR, only 4 seconds off the winner after 6 hrs of racing. This car is very competitive and a must-have if you want a chance to win the Bathurst 6HR or want to run NSW/QLD State Series or APC. Years of development work and more money than I can remember creating a very reliable race car. Strict maintenance records and race data can be provided. The car can be sold as is or as a

Taren Point NSW, Australia
Share
Watch