38 Drag Racing & Hot Rods for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
17
Roll CageLog Book
xbody Mustang Drag car 383 Cleveland, chi heads and intake Mechanical injection new waterman’s pump T400 box with trans brake Methanol Ice Ignition with 2 step Current andra teched cage Tube front end, front clip Coilover front and rear 4 link rear Weld rims Just had tuned at just over 500rwhp Runs consistent low 6’s 1/8 and mid 9’s 1/4 Well sorted turn key car
8
Funny car 1955 Ford Thunderbird Chrome moly 125” wheelbase, 20.5” hoop Car has run low 6’s in supercharged outlaws Current IHRA tech Chassis & Seat painted black 40L fuel tank / 15L oil tank / Puke tank powder coated black 4 wheel disc brakes Weld Magnum fronts 24/5/15 tires Weld Magnum beadlock rears, Hoosier slicks 34.5/16/17 floater rear housing MW axles 40 spline Adjustable Chromed wheelie bar C02 bottle Oberg oil filter Computer box with 12v Battery Aluminium throttle pedal and cable Ne
32 1
Roll Cage
General: Full chrome moly tube chassis by Chris Alston in California. Glass front, steel doors and rear. New Tailgate, body stripped and repainted in custom pearl blue. Custom wing, wheelie bars, parachute. 20l alloy fuel cell, new rear mounted battery. Linelock and quick release steering wheel, 5 point harness, alloy ice box. Completely rewired throughout. Certified by both NZDRA and IHRA. All fabrication done by Raceworks in 2021. Engine: 427 LS7 built by Steve Morris in USA in 2021, approx 10
9
Log Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!
14 1
RegisteredRoll Cage
Predator Ute up for sale as seen in NZV8 magazine. Fully certified for road, current WOF and Rego. This Ute is a one off and built extremely well. Regular maintenance carried out since I have owned it from 2020. Genuine reason for sale. This Ute went from Moyes Holden and got fabricated. Ute runs cool and well. 720hp, 10lb boost, nitrous no longer hooked up (bottles still in Ute). YouTube video attached rom NAC Car Culture - Ute is on from running time 1-minute in the video. Engine- 400 Small
10
Roll CageLog Book
Gary Hansen RaceCraft built (USA) ex Pro Stock, complete roller, Koni electric shocks, Race Pack dash, race pack SC 1000 data logger, Lamb brakes, Ron Davies radiator, 40 spline Mark Williams axels, Weld Magnum wheels.. too much to list Has gone 7.22 @ 191 mph, will suit a wide variety of classes This car has less than 200 passes Please call for more information
5
Roll Cage
Ford 1 Tonner drag Ute Full rollcage B&M Shifter Autometer Gauges Autometer Shift Light race seat & 5-point harness Hoosier Rear Slicks Upgraded Rear end. Upgraded Tail Shaft Comes with many additional spares. Contact Karen for more details
20
Roll Cage
Time to go unfortunately, Chevy Belair, new build not quite finished. Set up for A Gas and or 1/8th mile. Diff - new Chevy 12bolt with Lenco spool 5.44 gears and Summers Bros axles and "C" clip eliminator kit new tailshaft. Wheels are 15x14.5 Centreline Pro stacks with 32in slicks, 15x5 frontrunners. New cage, tubs etc. Torana front end and steering with SPAX adjustable front shockers. Engine - Sawka built, original 454 LS7 Big block, Crane R260 roller cam, lifters, rockers, Hilborn injection. T
8
Roll Cage
1971 Ford Maverick - Super sedan /super gas/ drag radial, ready to race in current tech, 402 cubic inch Windsor freshly reconditioned, SVO block internally balanced steel crank with girdle,13.1 compression, edelbrock heads, solid roller comp cam, brand new dual quad AVS2 carbs, Neil Maxwell / Precise Automatics built C4 reverse pattern with transbrake, Biondo delay box electronics, Strange diff center, 33 spline moser axles, QA1 rear coils on S&W four link, brand new “Suspension Dynamics” comple
4
Roll CageLog Book
1927 Ford Roaster Drag Racing Car Engine: 383 Small Block Chev Gearbox: Powerglide Rear end: Strange housing and center with pro gears Chassis: Complete CM4130 chassis For photos go to www.cacklingpipes.zenfolio.com and search number 2360 or feel free to contact me with any questions.
6
Roll CageLog Book
Ready to race dragster.Engine 400ci Small block chev,runs methanol.Engine rebuilt in 2022 .Has run 1 meeting. Transmission 2speed Powerglide transbrake and timer.Verry reliable and consistant.Last 3 runs were identical times. Runs 8.3 At sea level. A built in trailer with 4 new tyres included.
8
Roll Cage
HI ALL FOR SALE " OUTLAW NITRO FUNNY CAR 125IN " CHANCE OF A LIFE TIME TO OWN , 125IN CHROME MOLY CHASSIS STRANGE TOP LOADER REAR END WITH CARBIN FIBRE BRAKES , LENCO 2 SPEED & REVERSER , 10.5 FULL TITANIUM CLUTCH & CAN , M/T FRONT & REAR RIMS & TYRES , TFX BLOCK BRYANT CRANK MILLER RODS VENOLIA PISTOND DART BILLET HEADS " PSI BLOWER WATERMAN PUMP ENDERLE BIRD HAT , FULL RPM DATA COMPUTER SYSTEM , ABSOLUTELY NO MONEY SPARED ON EQUIPMENT & PRESENTTATION ON THIS BUILD . CAR IS HAND PAINTED
5
Roll Cage
VY Commodore Drag Ute. Drop an engine setup, ecu and converter in and go racing. Has Coan built T400, Harrop full spool 1000hp rear end, 3" 2 piece chromoly tailshaft, 7 point chromoly cage, chromoly front end, chromoly v6 k frame (can buy LS mounts to suit), wilwood booster delete master cylinder, full fire suppression system, drag bags in the rear, custom built light mags 4" fronts 10" rears, light weight brake rotors and callipers, fibreglass bonnet and doors, perspex front and rear windscree
1
2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.
8
Complete turn key super sedan, near new 540 bbc, methanol,dart block new internals AFR heads pro dominator and fuel system msd 7al and 3 step delay box th400 with brake ppp shifter fab9 rear 4 wheel aerospace brakes new pwr radiator varishocks all round dj chute near new tyres early mid 9 car steel body glass hood and doors too much to list also has import approval for rego . Option of Honda 400 quad pusher and custom enclosed trailer at extra cost. Would consider the complete drive train and k
22
Roll CageLog Book
Roller only Full chassis Fibreglass front & doors Stelito steering rack Strange front struts and brakes Strange rear shocks and brakes line lock full floating rear 40 spline billet axels 16v battery and charger sheet metal interior and floor ANDRA taged due for tech inspection
7
1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers