17 Circuit Racing for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
11 1
Roll CageLog Book
Subaru WRX Race Car MY04 Java Black Pearl Race/Track/Tarmac rally EJ20 re-built with STI heads + Cams Race pistons + rods, and bearings (by STI Docklands) Custom built ATP High Flowed VF34 Turbo with upgrade MFS Billet CW STI ECU tuned by RE Motorsports AVO pod filter and Cold air induction Custom intercooler spray system New 5 speed gearbox installed April 2024. ADS Level 4 - Hybrid Spec 3 Exedy Racing Sports Organic Clutch Kit AP Racing brakes (front). Plenty on pads (Ferodo DS3000) Rear diff
9
Car has been built for track days. Engine built by Top Torque to make around 220kw atw. Ej20 Engine with forged pistons, H beam rods, Arp head studs and MLS-R head gaskets. All bottom end bearings are race series. Apexi power FC. Dyno tuned by Rev Zone with a safe 160kw atw on 18psi. Full turbo back mandrel bend exhaust. Arc intercooler STI Front seats STI Front strut brace STI alloy control arms Whiteline sway bars and end links Whiteline anti lift kit Whiteline strut tops Adjustable shocks
20 1
Roll CageLog Book
Winner of 2022 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded - 3 of 4 rounds contested for 7 Class wins, 3 Round wins, 3 Outright race wins. Two wins (including one fastest lap) and 2 second placings in Round 1 of 2023 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded. Then competed in 2 rounds of 2023 Victorian Sports Sedans Championship for something different and to race at Phillip Island. Quick car that sounds great ! Motorsport Australia & AASA L
14
Roll CageLog Book
1970 Mini K 3D sports sedan First log booked 15th March 2010 built and raced by owner only custom sub frames Honda B16A 1595cc naturally aspirated Fresh motor 5 speed transmission - LSD 4 pot front brakes/standard rear brakes with vented brake drums coil over shock absorbers and Rose joint counter arms Perspex windows bond steel roll cage approved 6 point harness (SCHRUTH) SABELT race seat 13 inch 8.5 historic mullins race wheels fiberglass front nose cone and boot and front and rear bumper bars
12
Roll CageLog Book
Datsun Sunny sedan built for IPRA (3J) but can easily be a Supersprint, Hillclimb or even road car. Currently running as an Under 2 litre car but could be upgraded to an Over 2 litre car easily. Excellent 1 owner body shell. Wildridge Fabrications National spec cage. R33 GTST brakes front and rear. H165/23 spline diff. Recently rebuilt RB20 gearbox. Adjustable front and rear shocks. Adjustable brake bias. New fuel cell, surge tank and pumps. Haltech Elite 1500 ECU, wide band controller and dash
10
Roll CageLog Book
The vehicle is ready to race we have been competing in Improved production racing but have only taken out on track a few times due to circumstances we have decided to sell the vehicle. -The engine is only two races old -The Turbo and Intercooler have been up graded -6Pod brakes at front & 8 Pod brakes at the rear -3 Way adjustable suspension -Has been Dyno tunes with restrictor for improved production racing Loads of fun to drive around the track it's set up and ready to go.
11
This is a great looking car that gets attention everywhere it goes. This car is set up for hillclimb and lapdash event, not Legend Racing. but could be returned quite easy if wanted to competed in a Tri-Series competition lapdash at Tamworth (21 - 22 May 2022). It has been modified beyond Legend racing specs. Obviously it has wings front and rea, it also has a full floor pan with skirts. Running soft slicks with little wear and plenty of runs left in them. Has a second set of rims with wets tha
13
Morris Mini Cooper S . Replica, 1967 Morris Mini Cooper S replica has all the attributes of a genuine Cooper s inc 1275cc motor , 4 speed gearbox, disc break front end , twin tanks, with tabs, boot board , 120 mph speedometer, hydro suspension, thicker brake pedal, vinyl covered dash, Cooper s heater, brake booster. Motor rebuilt 3 years ago ,The head has been ported and bigger valves fitted with hardened valve seats which was all done by Graham Russell so it’s nice and quick. It’s pain
9
Roll CageLog Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom subframes and front control arms 3 sets of wheels with a new set of soft Michelin Slicks Carbon front bar, bonnet, boot and wing Originally built for sports sedans but lately it's been used for time attack eve
12
Registered
This car is a time attack/road car. Has seen some races at lakeside. Always used Penrite 10 tenths on it, replaced oil filter after every race. Replaced Oil, Gearbox and diff oil every year. It was build and tuned to be very reliable, its only getting 184 kw at 4800rpm, 379NM @ 4500rpm. Currently doing 1:03 at Lakeside -Replaced stock small block to NEW STI block-EJ 207(Block + crankshaft + pistons) -Tomei sump Baffle kit -STI 11mm oil pump -Cylinder head servicing/machining -Roger Clark Motors
19
Roll Cage
Subaru WRX GD Hawkeye Tuned by STI Great car ready to drive nothing to spend Pictures tell the story original km as per photo Basically standard engine timing belt kit done including all pulleys and water pump Has STI top mount intercooler and pod air filter with aluminium radiator Brand new Rota gravel wheels 18inch with brand new Nanking AR1 tyres 225/40/18 Band new aftermarket Brakes 6 pot front 355 mm discs 4 pot rear 355 mm discs Full Invidia 3 inch system turbo back Brand new Sparco ci
12
Roll Cage
1999 Subaru WRX Impreza GC8 Car has been built and modified for Track day and Sprint use. Car was developed on the emphasis of handling and reliability, whilst maintaining a clean car that presents well. Car can be returned to Road registered if required. I still have all original parts and interior pieces. Engine has been built by Subaru Hamilton, and has a EJ207 STI engine installed - Semi closed Deck. - 14mm ARP head studs - DeatschWerks 1000cc Side feed injectors - Haltech PS1000 Tuned on
5
Roll CageLog Book
This vehicle is arguably the #1 Hillclimb Subaru in Australia. Winning 3 Australian Hillclimb Titles, 3 NSW Hillclimb Titles, 2 Qld Hillclimb titles and numerous club Hillclimb championships. Additionally the vehicle came 2nd outright for the 2021/22 Whiteline Tarmac Rallysprint Series. Vehicle built by Blake Engineering, is a 2006 Subaru Impreza WRX. Runnings a 450kwatw Deshelle built engine, currently tuned @ 341kw with bucket load of torque. EFR 7163 turbo, Haltech Elite ECU, wideband and das
7
Roll Cage
2000 Subaru WRX Race car/Track car/Hillclimb car Car was built from a road car 5years ago, every nut and bolt has been turned on the car. Has been painted inside and in the engine bay gloss white in 2pac, wheel wells have been painted with septone black sound deadener. Has state level bolt in cage done by bond rolls bars and is registered. All other upgrades and work is listed below any other questions or enquires please feel free to message or call me, inspections can be arranged. Can help wi
10
Roll CageLog Book
Datsun Sunny Racecar Forged sr20 headwork Rhil Ryall quad throttle bodies ,custom hand made headers , motec , dry sump , approx 235hp , r32 skyline Gtr brakes , Gearset ratio Skyline box , modified front legs , bilstien rear , H190 diff 15 x 7 wheels , custom fuel cell , much more , full spares package including diff ratios , brake pads , spare set of wheels , body panels previous lap record holder , very fast car and can be faster with better driver
7
Roll Cage
For sale, I have been running this car in sprints, hillclimb and the odd track day. New harness and shift lights, jump in and ready to run. Yamaha fj 1200 motor. Located Bendigo Vic can drop at a local depot if you wish to arrange freight.
18
Roll CageLog Book
History: Competition history from 1977, mainly raced Amaroo & Oran Parks. Original & subsequent Logbooks come with the car. Restoration: Completed to 1983 spec for Certificate of Description purposes. Livery: Rapid Transport Mechanicals: 1380cc (new build by Ken Nelson 08/09/21) Block: Morris 1100s Crank: Steel Russell Head, CAM. All the best components I could afford for reliability & performance Pistons: Russell Eng