SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

52 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

42
Roll Cage
Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

Keysborough VIC, Australia
Share
Watch
72
$360,000 EGC
Registered
The best sports saloon....ever Commencing production in 2021 and listing a raft of improvements over the already astonishingly capable M5 Competition, the M5 CS fast became THE ultimate M-Car and global production sold out instantly. Every single one of the only 20 allocated to Australia was snapped up as soon as BMW confirmed availability in our market. Fortunately the car lived up to the hype with the CS being even that much better than the Competition on which it was further honed and revise

Mona Vale NSW, Australia
Share
Watch
8
Registered
This was my daughters car which she has owned for 12 years and enjoyed every moment. Car is presently at my place which is about ten minutes past the Newcastle end of the freeway. Car has never been modified in any way and has been well maintained. NSW rego paid until May 2025. 166kw five cylinder low boost turbo engine has 320Nm of torque, 6 speed manual gearbox and Recaro seats. The few times I have driven this car I am amazed at how docile it can be but goes pretty good if you get up it. Al

Ashtonfield NSW, Australia
Share
Watch
14
BMW 130i 3e Production Car - For Sale or Hire Here’s your chance to own the 2023 Australian Class C (APC) Championship wining car. Extremely reliable well sorted and put together package that is still capable of podiums at the highest level of production car racing. This little BMW had a full refresh at the start of 2024 for the Bathurst 6hr and is ready to go for the new owner just add fuel and go. New CSF Radiator New clutch New water pump New Alternator / belts New leads and plugs New

Wollstonecraft NSW, Australia
Share
Watch
10
Registered
Very rare 90’s hot hatch for sale Owned this one for about 14 years No expense spared Genuine 1990 ford laser tx3 turbo 4wd Has a fully forged engine that goes like a scalded cat Body in great condition for age has couple stone chips etc Has made 223hp at all 4 wheels on e85 Link g4+ tuned my madoc performance 5 stud gtr hub/brake upgrade all round Bc Coilovers strut brace Mod list in the photos Located in Warwick Currently on club rego $21,990 ono

Warwick QLD, Australia
Share
Watch
51
$150,000 EGC
Registered
Towards the end of the F80 series M3, BMW had really got the formula right. Over 5 years of continual development and several iterations, each successive addition just tweaked and refined what was already a fine drivers car into something of a fine drivers weapon. The Competition was an immediate success and what most thought would be the pinnacle....and then the CS was announced. Taking everything from the Competition, the car was again refined and turned up and culminated in the car we presen

Mona Vale NSW, Australia
Share
Watch
4
Roll Cage
One of the original WPS Supercars, Driven by David Bernard. It was originally built by 00 motorsport. Sequential gearbox, Has been stored for a while but is still in excellent condition. Willing to help with shipping arrangements. Logbook can be sourced through Cams Australia.

Taupō, New Zealand
Share
Watch
8
Roll Cage
Ford BA race ute (used in the Queensland production Ute series) Has come either 2nd or 3rd in championship in each year it’s competed - [ ] BF 6 cylinder gas motor , billet oil gears and tune (1-2 seasons old) - [ ] 6 speed gear box with rip shifter (4 races old) - [ ] Custom single piece tail shaft (4 races old) - [ ] Locked diff - [ ] Qld production ute series brake package - [ ] Quick release steering wheel - [ ] Scott’s rods cage (national spec not just local requirements) - [ ] Push butt

Mudgeeraba QLD, Australia
Share
Watch
95
Registered
“We stopped counting at 4,000 hours.” As far as modified Mustangs go, this would have to be one of the absolute best in the country, if not on an international level. A labour of love built by the team at Stevens and Brennan Automotive, the plate in the engine bay says it all: heart, body and soul. This really is a very special car. Fully engineered and NSW-registered, the 1968 model Ford Mustang runs a supercharged 5.0L Windsor engine with GT40 heads (the engine is the same specification as

Canterbury NSW, Australia
Share
Watch
15
Registered
Log Book
Features Harrop true track diff. New Koni shocks new Ford leaf springs King springs front. New tyres New brakes pads and rotors 12months registration Number 16 built of 57 This 2009 Ford Performance Vehicles Pursuit has a 5.4 litre engine and 315kW of power!. EXTRA FEATURES: - 19" alloy wheels - Data dots - Front & rear power windows - Power door mirrors - Full body kit - Starter button - Climate control air conditioning - Bluetooth - Limited slip diff (LSD) - Sports pedals - Ventilated d

Woongarrah NSW, Australia
Share
Watch
15
Aussie Race Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purposes built tilt trailer with winch. Sydney NSW Log book $18K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185

Hunters Hill NSW, Australia
Share
Watch
20
Roll Cage
Log Book
Own a piece of history. 2017 BMW M4 GT4 Accepting Offers, enquire now. Don't miss the chance to jump into the rapidly expanding GT4 Australia category, with this race ready and proven BMW M4 GT4. 2018 Bathurst 12 hour winner, at the hand of Tony Longhurst, this car has been parked up as a collection piece for much of its life since. Brought out of retirement for the 2023 Monochrome GT4 Australia competition by its new owner, it competed competitively, taking multiple podiums, while being

Ormeau QLD, Australia
Share
Watch
5 1
Roll Cage
Honda EG civic hatch race car, Built towards time attack and circuit races. Currently the fastest FWD car in W.A - Barbagallo raceway (58sec) and Collie raceway (1.11sec) with plenty more in it. Sleeved and built k24 motor making 580hp (only ran for 4 events and just had a check over with new fluids) Quaife Sequential gearbox (new) Elite racing baffled sump KAZZ 1.5 way diff DBW throttle setup traction control launch control MCA Red coilovers with custom spring rates with spare springs, New S

Bull Creek WA, Australia
Share
Watch
16
Registered
Hi, for sale is my EK1 Civic with EK4 facelift. I don't particularly want to sell it, but having 3 projects cars and renovations on the go at the same time something has to give. Pros: - Overall it's a great little car and has been modified to be either a fun street car or to be competitive on the track. - Has all the fruit you could want. Everything is done, just get in and drive. - Qualifies for Vic historic registration next year. - Engine is registered to the chassis. Cons: - It's a 25 ye

Flemington VIC, Australia
Share
Watch
5
Roll Cage
Log Book
John Mcintyres NZ championship winning car has brand new engine with stroker kit which was built by a very reputable engine builder has a rebuilt gearbox.... has been a very cool car to drive but now someone else's turn... car comes ready to race with heaps of spares.... engine has very close to 600hp.... bring a trailer for the car and another for the spares.

Taupō, New Zealand
Share
Watch
15
Registered
Roll Cage
Amazing 1.9ltr DC2 - Motec M1, Dart block, Golden Eagle crank and Rods, Wiseco pistons. Built for boost... and to be a reliable track engine.. currently turned NA.. Toda headers.. Built by JHH - see image of JHH stamped engine. All Ferrea heads components , over sized valves, 1000cc Injection Dynamic injectors ATS Carbon clutch ATS LSD Skunk cams Spoon brakes Tein Super racing coil overs, with external reservoirs Cusco sway bars All bushes changed with Hard Race bushes. Unfortunately only s

Albany Creek QLD, Australia
Share
Watch
8
Registered
Log Book
2006 Ford Fiesta XR4 150K KM 12 months rego from Thursday 14 March Body and paint is good and presents very well, few stone chips as expected, front bumper needs a paint Interior is excellent condition, won't come with the Sparco but will include the seat base if needed. The original seat will come with the car and fitted. I have a brand new rear boot badge and rear vision mirror to fit + Cosworth Cams + Cosworth manifold (genuine) + 4-1 Miltek exhaust + Larger upgraded throttle body +

Maroubra NSW, Australia
Share
Watch
15 1
Roll Cage
E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Upper Sturt SA, Australia
Share
Watch
9
Registered
CALLING ALL HONDA GEARHEADS! 1994 HONDA CIVIC EG, GLI HATCHBACK MANUAL 5th Generation JDM Civic 267,000 km Car is in original stock condition No modifications A TIMELESS CLASSIC Own a piece of Japanese automotive history! Known for their well-designed and engineered components. The engines, transmission and other vital parts are built to last! Honda has a reputation for high-quality manufacturing processes. The parts used in a Civic are of good quality and assembled with care. Known for

Southport QLD, Australia
Share
Watch
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to

Kanwal NSW, Australia
Share
Watch