55 Holden for sale

Holden VE Track car, Cams Approved Cage, Sparko race seat, Has Freshly built motor. Crow Cam, LS3 Rectangle Port Heads, Arp Hardware( head bolts, Rod Bolts, Cam Retainer Bolts, Balancer bolt) Mellings High Flow Oil Pump, Oil Cooler, Fuel Cell, Baffled Race sump, New Coil Packs and Leads , New Bosch 750CC Injectors, XYZ Coilovers, HSV AP racing Brakes -(new pads) 3.7 Diff, New Battery, Brand New Freshly Installed Hatch System Has had all weight removed where possible .Has done 20 Laps at QR for

Ready to race! Freshly built circuit racing track car. CAMS roll cage, Brand new 427 Dart race engine, rebuilt and strengthened T56 gearbox, brand new True Trac Diff (3:7). Car has an Armstrong racing dry sump system with coolers on the engine oil, diff, gearbox, and power steering. New brakes and no expense spared. This is literally a turnkey and race setup with nothing left to do. Front bar is off the Perkins Engineering VZ Jack Daniels No.7 race car. Only selling as I am stepping into a Euro

Holden hz drag car good reliable car autometre gauges 304 with a 100 wet shot of nitrous programable msd ignition roller rockers victor jr highrise manifold 750 dp holley 30tho pistons standard rods and crank electric water pump car was fully rewired 12mths ago trimatic gearbox vl turbo diff with full spool 31 spline billet axels 3.9 gears hoozier slicks and front runners has just had all bushes front and back replaced all new tie rod ends and arms. Glass front and rear windows perspex in doors

VY Commodore SS circuit/sprint race car. 6L Dart LS Next. Forged and balanced rotating assembly, 12.5:1 compression on E85. 470 rwhp on safe tune. No shortcuts taken - all the best equipment throughout. Engine has only done two sprint meetings. Selling to move to a different race category. Also : * Trickflow GenX 220 heads * FAST LSXR 102 manifold, FAST 102mm throttle body * Deatschwerks 60lb/hr injectors * Crow 871741 camshaft * Lunati link bar lifters * Moroso oil accumulator * PWR oil coole

Asking $28k, open to offers. 2007 Holden Caprice with extensive modifications. Factory walkinshaw/HSVi packages. This car can be sold with road worthy, rego and all receipts of work completed. 12,xxx kilometres on engine New 6l80E Gearbox was installed in 2021 by Holden. Engine components: 375HP - 280KW Stage 2 Crow Cam 219-227 112 VTKLS8 Dual valve Spring kit LS7 Lifters & Buckets LS3 Gaskets, head studs pn# 17800568 LS2 heads Work done on engine when modified: Overhaul cylinder hea

VT Commodore rolling shell.

Wanted Supercar Parts PMM- Colin VY to VZ Holden Commodore restoration Car will be converted back to VY VZ from VT. Requires Panels, brakes & HMS Aurora Holden Motorsport Engine. Wanted: - HMS Engine complete or parts to complete engine ie manifold, jesel, crank, rods, sump, loop, dry sump pump etc - AP Calipers Front and Rear - Airbox - brake airducts - Panels, skirts, front/ rear bars, wing, rear diffuser etc - PMM engine mounts - Carbon door cards History: 2003-2005: Paul Morris Cha

MES2 completed in the Australian V8 Supercar Series between the years of 1998 and 2001 in 20 races including Bathurst, Sandown, Indy and the Adelaide 500 It was campaigned by Tomas Mezera and co-drivers: Terry Finnigan, Alain Menu (two time British Touring Car Champion) and Tony Ricciardello In 1999 the car was leased by Gibson Motorsport and raced by Steve Richards at the Albert Park Grand Prix in the #7 VT Wynn’s livery The car is presented today in the black & white Densitron Livery, has a

I have my VF Holden Caprice has done 92,XXX ks car is almost brand new and in immaculate inside and out side is in great condition aswell few stone chips at front other then that nothing major (can be fixed for right sale price) i have spent upwards of 95k on build so far, and have only had the car for 2000ks since finishing the build, a great solid set up as follows: PARTS: - 227 224 , 114 lsa boost bald eagle cam shaft texas speed - Pac valve springs with locks retainers and valve steam seal

Perkins 028 Replica build of the Parsons transport 55 vs commodore. Dual 3J log booked MA and AASA, Ipra, Replica tourers, QTTC, Sports sedans, Vic v8s. Ran it in November 25 with replica tourers at QR with a pole and 4 from 4 race wins. SBC 010 block 6ltr, 18 deg Hrd heads, 13-1 comp, Aed carby and gm 2 piece intake manifold, carillo rods, diamond pistons, jesel rockers and Msd and timing belt, callies magnum XL crank, steel caps and girdle. Racepak logger dash. New barnes dry sump pump, pe

Holden VE SS-Z Ute – HPF Stage 5 Build (minus exhaust) – Under 1,000 km Since Build This is one of the cleanest, tightest VE SS-Zs you’ll find — freshly built, barely driven, and ready for its next owner who knows quality. The HPF Stage 5 package (minus exhaust) has just been completed and done under 1,000 km, making this essentially a new high-performance setup that’s still crisp, strong, and unspoiled. Performance & Upgrades HPF Stage 5 package (minus exhaust) — completed by Horsepowe

Price Reduction Ex Andrew Mumford, Group NC LJ Torana with race history. March 17 colour in XU1 livery. Originally built by Harry Bargwanna, serviced and maintained by Melbourne Performance. • Engine - The 202 race engine was originally built by Ian Tate with the most recent freshen up by Melbourne Performance. Has Scorcher electronic ignition and triple 48mm DHLA Dellorto carbs. • Drive Line - Brand new AP racing twin plate clutch, Aussie 4speed gearbox, TruTrac style locked diff with float

LC Torana Sports Sedan, This is a full space frame car that is running a freshly built mid mounted turbocharged, fuel injected (Motec) V6 Buick (Indy Car Engine) that made 750hp on a safe tune, check out the video for more detail on the engine. Behind the engine is an MVE four speed (ex Nascar) and the a nine inch rear end with a Harrop aluminium centre with floating axles. This car has had a massive amount of time and money put into it to get it to its current state, and with only a minimal

-Log booked Group Nc LJ Torana ready to race -Strong full roller 300hp engine with all the top quality internals (forged, stainless, billet, titanium, needle roller cam bearings etc) -M21 XU-1 ratio gearbox -3.55 28 spline full spool diff -Koni rebound adjustable shocks (rebuilt and dyno'd) with king springs -Car is in extremely tidy condition, body and paint is immaculate -Meticulous maintenance always carried out -Fast, consistent and reliable over many years -Comprehensive spares package; d

1962 Holden EK ‘Special’ Sedan Hydra-Matic Australian classic - 100% Original condition and hard to find. A classic and striking combination of Grey exterior on silver and red interior with silver insets, which is in amazing condition for its age. In terms of finish, “Standard” vehicles were painted in a single colour with no additional trimming or fittings, while “Special”, the most popular model, came with stainless steel trims along the side and a white roof, as well as chrome Special badges,

Offered for sale after an extensive ownership period is James Brock’s Bathurst Tourer 300-winning Commodore. Originally a VP Commodore race body shell, this car was first built as an AUSCAR by Melbourne-based business owner Greg Stevenson to race as part of the Australian Super Speedway Championship. It made its race debut at the Thunderdome in December 1991 and was raced as the #03 Goodyear Commodore by the late Peter Fitzgerald. In Fitzgerald’s hands this car finished third to Brad Jones and

Exterior - HSV fluted guards with genuine HSV flutes - HSV rear roof spoiler - Wrapped gold flutes, eye lids - Genuine rear GTO spoiler - Windows tinted 18% - Brand new black, machined 19” simmons with brand new tyres - Car was resprayed couple years ago, been under a cover all the time when nit driven. Interior - Year old red leather interior with custom red leather handbrake boot and shifter boot. - Genuine HSV steering wheel re-trimmed - VZ genuine monaro dash with gauges that work - Cus

Holden LJ GTR 1972 project, body work is 80% comes with GTR motor, reconditioned m20 box, LSD 3.08 diff, front and back seats ,wiring dash loom , including and all 3 ids, colours are patina gold with antique saddle trim, needs paint &some panel work and trim , ring for id information and engine is not original its however a JL block dated 1973 gtr engine