38 Holden for sale

VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun

FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL

Holden Commodore 2017 Series 2 VF SSV Redline 6.2 litre V8, under 20,000klms Son of a gun grey, 20” rims, tow bar, engine cover, back spoiler, window shields, bonnet protector, light protectors all round, insect grill, black inserts on exterior ventilation points, window tinting and more. Only genuine inquiries please 0403 648 220 $76,500 but will consider genuine offers

A Historically Significant Survivor a Holden Torana GMP&A Factory built A9X Hatchback Road car specialty built for HDT mechanic and Race team driver Wayne Negus as his own Personal Family car.This is the only A9X GMP&A Hatchback to be built in this specification and color, Confirmed by Mike Prowse the Production control Supervisor at GMH in AMC mag issue 35, as this car is definitely a 1 of 1 build from GMH AND CERTAINLY THE RAREST WITH SUCH AN INTERESTING HISTORY AND PROVENANCE. Wayne spent a f

Here we go, was original 2001 HSV VX GTS300, build number 044 and I started doing some track days and then lots of track days and then NZ Superlaps and now I have a full-fledged race car with rego EDE220 on hold. Engine is an L98 that has been bored and stroked 408CI and delivering 572 RWHP. All engine build sheet and dyno sheet are included in the pics, has Castle headers with 2" primaries into 3.5" MRX side exhaust, inlet is FAST with 102mm throttle body. This is coupled to a 6 speed TTI tra

Sports sedan. Have to sell so I can finish other projects. Recently raced in NSW Hillclimb round on fresh set of A7 Hoosiers. This car has racing history and logbook dating back to 25/3/1982. 265 Hemi 6 mid-mounted. Genuine Hopwood wheels. Fully floating brakes, 10 bolt rear end and Ford single rail gearbox. Plenty of history in this car, and we can put you in contact with its original builder. Motor, genuine 48mm Webers, fuel system, and brakes have recently been re-done, and all electrics from

Predator Ute up for sale as seen in NZV8 magazine. Fully certified for road, current WOF and Rego. This Ute is a one off and built extremely well. Regular maintenance carried out since I have owned it from 2020. Genuine reason for sale. This Ute went from Moyes Holden and got fabricated. Ute runs cool and well. 720hp, 10lb boost, nitrous no longer hooked up (bottles still in Ute). YouTube video attached rom NAC Car Culture - Ute is on from running time 1-minute in the video. Engine- 400 Small

86055 kms on odometer, 6 speed auto in excellent condition! $30,000 ono.

2010 Holden Statesman WE Sleeper Can be driven on open road Takes E85 only, set up for dragging 402 iron block with Borg Warner turbo Turbo 400 gear box Comes with tyres and rims to drag 14 psi, 868hp at the hubs, 10.8 sec quarter mile. Good condition, one owner only. Registered on road, genuine sleeper. $65,000 ono.

Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.

2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg

VS SPAC LS1 AUTO. $25,000 Freshly finished and converted LS1 auto 4l60e. Top end rebuild on the engine, cam, heads shaved and rebuilt, new double row timing chain, oil pump, lifters and springs. New Manifold, radiator, rebuilt auto, 3000 dominator stall, new front and rear brakes and front shocks, new steering rack and new tailshaft. Brand new rod shop conversion kit and new exhaust. New fuel reg, lines and fittings. New in tank walbro pump, new manifold. New mini low mount A/C pump installed

CAMS LOG BOOKED NO RUST 4 DOOR TORANA BUILT IN MIND OF THE GROUP C A9X APART OF HAVING OVER 500 HP BUILT WITH ALL NEW PARTS GROUND UP. TESTED AT QUEENS LAND RACE WAY 30 LAPS AT 7,000 TO 7.5000 OIL PRESSURE STAYED AT 50PSI 60 TO 70 ON START UP,CAR STOPPED CORNERED DROVE FANTASTIC BRAKE PADS ARE PMU USED HAS CLUB REGO,BUT IS A FULL 100% RACE CAR 308 RACE ENGINE COME RACING BILLET 3.55 CRANK,H BEAM 1.125 RODS,WISCO .020 PISTONS,CLIVE ROLLER CAM,T-BAR CPMP PRO ROLLER LIFTERS,OIL GALLERY DELIVERY

PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l

2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.

1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers