16 Holden for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
71
Here is yet another stunning example of a SS Group A Walkinshaw. Once again, this car was originally part delivered to the D’Alberto Holden dealership in Echuca Victoria and kept with the D’Alberto family as part of their private collection until 2018 which was never registered and still remains unregistered with its original blank logbook meaning you could be the first private owner of this very special HSV. In that time the car was only used for maintenance purposes and to this day has only cl
9
Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000
10
Roll CageLog Book
VL Calais - Drag Car Roller Set up for SBC and glide Comes with, engine plates, pipes & tail shaft to suit. Full Chassis 4 Link Drag Car. Setup by John Willard @ Flatout Services. Funny Car Roll Cage. ANDRA & IHRA Tech Front Race Struts. Mark Williams Diff Center with new 4.56 gears 35 Spline MW Axels. Koni Drag Race Double Adjustable Rear Shocks. Adj Wheelie Bars Custom Alloy Fuel Cell Wiring, Shifter with Dedenbear shift solenoid, Gauges, MSD 6AL, Chute, Harness, Window Net etc. Wil
19 1
Roll Cage
Brand new 383 Chev Roller engine Hillborn injection, powerglide. MSD ignition, 35 spline maxispool diff 4.33 diff gears, Harrop alloy diff carrier, deadenbear delaybox, chute, Convo Pro rims, the list goes on. Ground up build, bare metal respray, this car is a true steel body car with everything done and ready for its debut run down the 1/4mile. Receipts for engine and work total well over asking price. Further details contact Chris on 0409348441.
9
Roll Cage
**PRICE DROP** 2004 Holden VY Ute Drag Car 468 BB CHEV (selling turn key) Monaro front clip, Steel shell & Alfa glass panels. 9 inch rear with 455 nodular 35 spline spool & Mark Williams axles. Macdonald Bros 4 link rear end with sway bar & strange shockers. Light weight K frame with new struts & Wilwood front brakes and master. Advanced headers customs pipes, BG fuel pump, alloy radiator, MSD power grid ignition. 15x14 Weld racing rears & 15x3 front runners. Weighs 2590 lbs without driver.
20
Roll Cage
Was being built to be a 6 second car. Setup for ls engine, powerglide trans, big single turbo(included). FIBREGLASS BONNET, BOOT ALL STEEL WALK OFF FRONT ALL STEEL ROOF, REAR QUARTERS BLACK CONVO PRO'S MCDONALD BROS FRONT END PRO 9 REAR END FULL FLOATER (40 SPLINE BILLET AXLES INC). ALL TIN WORK INCLUDED BIG DOLLARS IN WORK ALRAEDY COMPLETED (HAVE RECEIPTS). CONTACT FOR MORE INFORMATION.
27
Roll CageLog Book
2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu
14
VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun
6
Log Book
FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL
10
Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.
26
2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg
10
PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l
5
Roll Cage
VY Commodore Drag Ute. Drop an engine setup, ecu and converter in and go racing. Has Coan built T400, Harrop full spool 1000hp rear end, 3" 2 piece chromoly tailshaft, 7 point chromoly cage, chromoly front end, chromoly v6 k frame (can buy LS mounts to suit), wilwood booster delete master cylinder, full fire suppression system, drag bags in the rear, custom built light mags 4" fronts 10" rears, light weight brake rotors and callipers, fibreglass bonnet and doors, perspex front and rear windscree
1
2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.
7
1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers
54
They don’t get much wilder than this!! An out of this world take on the iconic Holden One Tonne ute!! Personally built by the current owner and now ready to be enjoyed and showed by the next owner. The whole car is impeccably detailed with hundreds of hours invested into making this car stand out from the crowd. From the 800+ horsepower 540 big block Chev and the totally unmissable 10/71 Blower Shop blower with full billet hat!! The custom blue metallic paint, HZ front clip, custom interior and