22 items for sale

For Sale: One-of-a-Kind BMW E39 540i Experience unparalleled driving with this meticulously upgraded BMW E39 540i. • Manual Transmission: Expertly swapped with genuine BMW parts imported from the USA and UK. • Engine Rebuild: Completely rebuilt from the ground up with cast iron cylinder sleeves, genuine BMW bearings, pistons, rings, and timing chain kit. • Enhanced Performance: Equipped with BC Racing coilovers and a Turner Motorsport sump guard for optimal handling and protection. • Prem

The AC Schnitzer S5 3.0iX is a Schnitzer conversion of a BMW 525 iX This car was built by BMW in RHD (unique for a 525iX) and then underwent the conversion at the UK Schnitzer workshop. The original M50 BMW engine is replaced with a Schnitzer S5 engine which is 3.0 litre and with Schnitzer cams, porting and new manifold and exhaust. The mapping is completely upgraded and BMW M Technique is installed. The suspension is upgraded with Schnitzer coils and new Bilstein shocks which are coupled with s

*May trade for a circuit car* Super tuff HQ LS Monaro coupe Older restoration, awesome body and immaculate interior. Big $$$ Holden stroker engine,making 568hp on the engine dyno,running on 98 with a streetable 11.1 comp. 11.2 1/4 na 10.7 100 nos shot Details of driveline in photos Regretful sale, but wanting to pursue circuit racing, Will consider a deal with a well built Holden circuit car

Registered on road, genuine sleeper Runs on E85 only, 402 iron block with Borg Warner turbo. Turbo 400 gearbox, transbrake with two step. This car is a sleeper, good condition. Comes with tyres and rims for drag racing. 14 psi 868hp at the hubs, 10.8 Single owner

Holden VZ SS Crewman L76 Gen 1V 6.0 Litre T56 6 Speed Manual 2006 Model Currently 520.8 RWHP ready for a retune to get the 650hp reliable its setup for if you wanted to. ENGINE WORK ProCharger D – 1SC Intercooled Centrifugal Supercharger Siemens / VDO 63lb per hour fuel injectors & custom fuel rail’s & fittings 044 fuel pump , surge tank & regulator , mounted underneath the car Pacemaker 4 into 1 ceramic coated extractors 2.5’ stainless steel twin system & high flow cats & dump tips Crow Cam 21

The GTR-X was a fascinating concept from the get-go; A fibreglass body, over a steel “ladder” chassis, which may seem exotic to an Australian market, but GM had been successfully using that technique with its iconic sports car, the Corvette, from 1953’s C1. Come 1969, the Corvette had evolved to the swoopy C3 guise, featuring independent suspension, four-wheel disc brakes and wild 427 L88 spec’ motors. Along that 16 year passage, the Corvette’s early mistakes became improvements and a smooth, fa

1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.

FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL

A Historically Significant Survivor a Holden Torana GMP&A Factory built A9X Hatchback Road car specialty built for HDT mechanic and Race team driver Wayne Negus as his own Personal Family car.This is the only A9X GMP&A Hatchback to be built in this specification and color, Confirmed by Mike Prowse the Production control Supervisor at GMH in AMC mag issue 35, as this car is definitely a 1 of 1 build from GMH AND CERTAINLY THE RAREST WITH SUCH AN INTERESTING HISTORY AND PROVENANCE. Wayne spent a f

86055 kms on odometer, 6 speed auto in excellent condition! $30,000 ono.

2010 Holden Statesman WE Sleeper Can be driven on open road Takes E85 only, set up for dragging 402 iron block with Borg Warner turbo Turbo 400 gear box Comes with tyres and rims to drag 14 psi, 868hp at the hubs, 10.8 sec quarter mile. Good condition, one owner only. Registered on road, genuine sleeper. $65,000 ono.

Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.

2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg

CAMS LOG BOOKED NO RUST 4 DOOR TORANA BUILT IN MIND OF THE GROUP C A9X APART OF HAVING OVER 500 HP BUILT WITH ALL NEW PARTS GROUND UP. TESTED AT QUEENS LAND RACE WAY 30 LAPS AT 7,000 TO 7.5000 OIL PRESSURE STAYED AT 50PSI 60 TO 70 ON START UP,CAR STOPPED CORNERED DROVE FANTASTIC BRAKE PADS ARE PMU USED HAS CLUB REGO,BUT IS A FULL 100% RACE CAR 308 RACE ENGINE COME RACING BILLET 3.55 CRANK,H BEAM 1.125 RODS,WISCO .020 PISTONS,CLIVE ROLLER CAM,T-BAR CPMP PRO ROLLER LIFTERS,OIL GALLERY DELIVERY

PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l

Now QLD Regoed and Mod Plated 1997 BMW E36 328i coupe - 6 litre Chevy LS2 inspected and refreshed - Mild cam package (112 LSA) - 6 speed manual Tremec TR6060 gearbox - Alloy radiator with Spal fans - Stainless exhaust - Custom made driveshaft - 8 Bolt 3.9:1 limited slip diff re-built in 2016 - Solid M3 axles (not the hollow ones found on certain models) - Genuine BBS wheels - Varex muffler for variable exhaust volume - Coilover suspension - Reinforced rear strut towers (common probl