SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

38 items for sale

Refine Search

Clear All
Keyword
Category
140
48
28
20
3
2
Price
Minimum
Maximum
Listing Type

All Results

30
Registered
A Historically Significant Survivor a Holden Torana GMP&A Factory built A9X Hatchback Road car specialty built for HDT mechanic and Race team driver Wayne Negus as his own Personal Family car.This is the only A9X GMP&A Hatchback to be built in this specification and color, Confirmed by Mike Prowse the Production control Supervisor at GMH in AMC mag issue 35, as this car is definitely a 1 of 1 build from GMH AND CERTAINLY THE RAREST WITH SUCH AN INTERESTING HISTORY AND PROVENANCE. Wayne spent a f

Perth WA, Australia
Share
Watch
5
Roll Cage
Log Book
1980 ford xd falcon drag car New car has arrived wanting to move on asap Factory 351 manual 9 inch car Very clean car absolutely no rust paint in mint condition Would keep the car but I have another project and can’t keep two cars. 393 Cleveland has had freshen up. Two passes old. Mechanical methonal injection Fuel system has had overhaul same time as engine C4 transbraked reverse pattern auto Strange 9 inch diff (4.3) setup with ladder bar suspension and adjustable shocks Car run

Bunbury WA, Australia
Share
Watch
8
Funny car 1955 Ford Thunderbird Chrome moly 125” wheelbase, 20.5” hoop Car has run low 6’s in supercharged outlaws Current IHRA tech Chassis & Seat painted black 40L fuel tank / 15L oil tank / Puke tank powder coated black 4 wheel disc brakes Weld Magnum fronts 24/5/15 tires Weld Magnum beadlock rears, Hoosier slicks 34.5/16/17 floater rear housing MW axles 40 spline Adjustable Chromed wheelie bar C02 bottle Oberg oil filter Computer box with 12v Battery Aluminium throttle pedal and cable Ne

Fraser ACT, Australia
Share
Watch
7
Sports sedan. Have to sell so I can finish other projects. Recently raced in NSW Hillclimb round on fresh set of A7 Hoosiers. This car has racing history and logbook dating back to 25/3/1982. 265 Hemi 6 mid-mounted. Genuine Hopwood wheels. Fully floating brakes, 10 bolt rear end and Ford single rail gearbox. Plenty of history in this car, and we can put you in contact with its original builder. Motor, genuine 48mm Webers, fuel system, and brakes have recently been re-done, and all electrics from

Taree NSW, Australia
Share
Watch
14 1
Registered
Roll Cage
Predator Ute up for sale as seen in NZV8 magazine. Fully certified for road, current WOF and Rego. This Ute is a one off and built extremely well. Regular maintenance carried out since I have owned it from 2020. Genuine reason for sale. This Ute went from Moyes Holden and got fabricated. Ute runs cool and well. 720hp, 10lb boost, nitrous no longer hooked up (bottles still in Ute). YouTube video attached rom NAC Car Culture - Ute is on from running time 1-minute in the video. Engine- 400 Small

Auckland, New Zealand
Share
Watch
5
Roll Cage
Ford 1 Tonner drag Ute Full rollcage B&M Shifter Autometer Gauges Autometer Shift Light race seat & 5-point harness Hoosier Rear Slicks Upgraded Rear end. Upgraded Tail Shaft Comes with many additional spares. Contact Karen for more details

Cessnock NSW, Australia
Share
Watch
7
Registered
86055 kms on odometer, 6 speed auto in excellent condition! $30,000 ono.

Lauderdale TAS, Australia
Share
Watch
18
Registered
Roll Cage
DESCRIPTION: Nissan R32 Skyline GT-R, Year: 1989 Powerful neck snapping performance ! 2-Door Coupe, All wheel drive Odometer: Indicating 127,512 Klms Engine: 2.8 Lt Turbo, Transmission: 5-Speed Manual, Grey Seats x 4. Currently tuned to be “run in” with new engine build by C - Red in Perth and built to performance specifications. Roll Cage Engineered in NSW by Phil Scoll – Automotive Consulting – as a Modified Production Vehicle. Work carried out by Peter Hopkins of Advan Performance.

Rossmoyne WA, Australia
Share
Watch
10
Registered
2010 Holden Statesman WE Sleeper Can be driven on open road Takes E85 only, set up for dragging 402 iron block with Borg Warner turbo Turbo 400 gear box Comes with tyres and rims to drag 14 psi, 868hp at the hubs, 10.8 sec quarter mile. Good condition, one owner only. Registered on road, genuine sleeper. $65,000 ono.

South Mission Beach QLD, Australia
Share
Watch
4
Roll Cage
Log Book
1927 Ford Roaster Drag Racing Car Engine: 383 Small Block Chev Gearbox: Powerglide Rear end: Strange housing and center with pro gears Chassis: Complete CM4130 chassis For photos go to www.cacklingpipes.zenfolio.com and search number 2360 or feel free to contact me with any questions.

Cessnock NSW, Australia
Share
Watch
8
Registered
R33 GTR. A few tasteful modifications, haltech ecu, haltech wideband controller, 1000cc injectors, gt2860-5 Garrett turbos, nismo/ARC intercooler, heavy duty clutch, n1 bumper and bonnet lip, nismo cluster and triple gauge set, BC external resevoir coilovers, 2 piece front rotors, rays wheels, good tyres. Very conservative tune. It's good to just cruise around in, runs very well. In two minds about selling, always said I would never sell, as it's a dream car. However 10 years on I have a family

Tasmania, Australia
Share
Watch
15
Roll Cage
Log Book
CAMS LOG BOOKED NO RUST 4 DOOR TORANA BUILT IN MIND OF THE GROUP C A9X APART OF HAVING OVER 500 HP BUILT WITH ALL NEW PARTS GROUND UP. TESTED AT QUEENS LAND RACE WAY 30 LAPS AT 7,000 TO 7.5000 OIL PRESSURE STAYED AT 50PSI 60 TO 70 ON START UP,CAR STOPPED CORNERED DROVE FANTASTIC BRAKE PADS ARE PMU USED HAS CLUB REGO,BUT IS A FULL 100% RACE CAR 308 RACE ENGINE COME RACING BILLET 3.55 CRANK,H BEAM 1.125 RODS,WISCO .020 PISTONS,CLIVE ROLLER CAM,T-BAR CPMP PRO ROLLER LIFTERS,OIL GALLERY DELIVERY

Gold Coast QLD, Australia
Share
Watch
5
Roll Cage
VY Commodore Drag Ute. Drop an engine setup, ecu and converter in and go racing. Has Coan built T400, Harrop full spool 1000hp rear end, 3" 2 piece chromoly tailshaft, 7 point chromoly cage, chromoly front end, chromoly v6 k frame (can buy LS mounts to suit), wilwood booster delete master cylinder, full fire suppression system, drag bags in the rear, custom built light mags 4" fronts 10" rears, light weight brake rotors and callipers, fibreglass bonnet and doors, perspex front and rear windscree

Cairns QLD, Australia
Share
Watch
31
Roll Cage
2007 DRB Ford GT40 Replica The Ford GT40 is arguably one of the most iconic and recognisable high performance race cars to ever exist. This Australian made 2007 DRB Replica has been modified to become a truly unique build with approximately 2500 Man hours of design and modification carried out by Racecraft Engineering. Fully engineered and modification plated this stunning example is ready to turn key and drive. Exterior Overview Finished in a Silver and blue Race stripe theme this GT-40 Replic

Kippa-Ring QLD, Australia
Share
Watch
15
Full roller ready for any engine combinations you wish Nissan Skyline r33 1995 full roller $14,000 Motor an all parts to do with motor is sold Only have the gearbox available If not I will just keep the car As I have owned this car for over 21 years I started building it about 15 years ago and then it was put into storage for over 10 years Car still has got all of its identification plates The rego run out about 16 years ago I believe it still can be registered in south Australia Ch

Glenalta SA, Australia
Share
Watch
1
2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.

Marangaroo WA, Australia
Share
Watch
22
Roll Cage
Log Book
Roller only Full chassis Fibreglass front & doors Stelito steering rack Strange front struts and brakes Strange rear shocks and brakes line lock full floating rear 40 spline billet axels 16v battery and charger sheet metal interior and floor ANDRA taged due for tech inspection

Darwin NT, Australia
Share
Watch
7
1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers

Barrack Heights NSW, Australia
Share
Watch