SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

21 items for sale

Refine Search

Clear All
Keyword
Category
47
21
9
7
2
Price
Minimum
Maximum

All Results

97 1
Roll Cage
This left-hand-drive, GM Australia-built Holden Monaro is a real head-turner and the perfect car for the collector, professional racer or track day enthusiast – or the same person all wrapped up into one! The Monaro was assembled by GM Holden at Elizabeth in South Australia and is believed to be one of only a handful of left-hand-drive examples in the country. The odometer reads 31,739kms of which the vast majority (~31,000kms) were driven by Holden engineers at the Lang Lang proving ground in

Calder Park VIC, Australia
Share
Watch
19
Registered
This 500HP Midnight Purple 3 R34 is not a car you can just go out and buy in this condition. I recently won this car through a raffle with Vincere Australia, who bought the car off of a woman who did the majority of the modifications. The paintwork, the body kit, the extensive modifications to reach 500HP reliably AND legally, really proves that this car was loved and cared for before I owned it. I have a tracked down a full history of the car in Australia; when it was imported, who owned it,

Woolloongabba QLD, Australia
Share
Watch
14
Registered
Up for sale is this 2001 Nissan Skyline R34 GTT Coupe Manual in QT1 Pearl White, 144000 kms. This car has a lot of good modifications that would have it as an excellent circuit/track car - I have had it as a street car for the last couple of years and am finding more and more that I do not have the time to drive it nor the time to do the work to it that I would like. Option 1, take it as is at $58,000 and enjoy one hell of a street car - or option 2 have this R34 Skyline converted into a cage

Moorabbin VIC, Australia
Share
Watch
10
Registered
Log Book
*May trade for a circuit car* Super tuff HQ LS Monaro coupe Older restoration, awesome body and immaculate interior. Big $$$ Holden stroker engine,making 568hp on the engine dyno,running on 98 with a streetable 11.1 comp. 11.2 1/4 na 10.7 100 nos shot Details of driveline in photos Regretful sale, but wanting to pursue circuit racing, Will consider a deal with a well built Holden circuit car

Riverside TAS, Australia
Share
Watch
6
Registered
Holden Torana sedan 1975 LS1 / T56 F.A.S.T. intake AFR cathedral port heads Comp Xtreme Energy cam 2000-7000 224/230, .581"/.588" lob sep 114 Comp cams hydraulic lifters Yella Terra true roller rockers Accel 40lb/hr fuel injectors Mal Wood Under dash Hydraulic clutch pedal assembly Mal Wood Reconditioned T56 and organic clutch B&M shifter Altra 9 A9 axles 28 spline Wilwood Dynapro big brake hub kit 12.19" diameter vented rotor Wilwood Brake master cylinder and Combination proportioning va

Bundaberg QLD, Australia
Share
Watch
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec

Caloundra West QLD, Australia
Share
Watch
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1

Mount Crosby QLD, Australia
Share
Watch
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Braeside VIC 3195, Australia
Share
Watch
27
Roll Cage
Log Book
2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

Mount Duneed VIC, Australia
Share
Watch
6
Log Book
FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL

Tanawha QLD, Australia
Share
Watch
7
Registered
Good track car for the road. My daily drive. Auto box. Nissan high performance, naturally aspirated engine, with handling to match. New engine, 4000cc engine with less than 10,000 kms on it. No nicks, no dents, no scratches -- immaculate! Inside and out; and under the hood. This car has never done a burnout or laid any rubber; never been on the track. Lots of power -- especially torque. Good set of Pirellis with some time left on them. Very noisy when provoked. Custom leather interior plus a

Hobart TAS, Australia
Share
Watch
9
Roll Cage
For sale s13 Silvia. I've owned the car for over 10 years and have decided its time to let it go. ENGINE 450hp at the hubs on E85 Forged ross piston and spool rods Brian Crower 264 cams Upgraded valve springs R35 coilpacks Kinugawa TD05-18G turbo Steampipe manifold Alloy radiator with AU thermo fans Oil Cooler with remote filter Bosch 1650CC injectors Turbosmart fuel reg Bosch 044 fuel pump with surge tank Haltech Elite 1000 with a custom harness LS alternator DRIVELINE BRAKES PAR engineer

North Toowoomba QLD, Australia
Share
Watch
7 1
Sold
Was $50,000$35,000
Roll Cage
Turn Key Racing Built RB26 engine with mild cams, custom piping (Titanium Intake). Moderated tune to 586hp RW on e85. Well sorted and proven track car with major suspension component and brake upgrades. Has current Qld Club rego (with Mod Plate). Limited Sprint use only (Lakeside/Morgan Park/ Bathurst). Car has performance well beyond its aging owner but due to retirement (Read No Income) needs a new life. Have a full list of what has been done on this car for those with serious interest.

Worongary QLD, Australia
Share
Watch
5
Registered
Nissan Skyline R32 GT-R RB26 DETT, March 1994, 131300 km, Paint is in very good condition, New Tyres, New rear coil over shocks, New Battery, New injectors, New coil harness, New crank angle sensor, New Alternator, New fan belts, Full service, New clutch slave cylinder, Disk brake grind with new pads, New alternator,

Zilzie QLD, Australia
Share
Watch
9 1
***price drop*** 3 litred 1996 R33 GTS-t s2 I have owned the car for 15 years in which time it's sadly seen minimal use. Made approx 350rwkw last week on run in tune at only 13psi on pump fuel. Fresh engine, ground up forged 3 litre build. Less than 1,000km. Ready for e85 and boost. Z32 5 speed. All custom arms and mondified subframe. Original interior for the vehicle re installed with no peices missing except a leather gear boot. Car will have full detail and stickers removed for handove

Oakdowns TAS, Australia
Share
Watch
10
Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.

Wacol QLD, Australia
Share
Watch
26
2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg

Mundingburra QLD, Australia
Share
Watch
14
Registered
VS SPAC LS1 AUTO. $25,000 Freshly finished and converted LS1 auto 4l60e. Top end rebuild on the engine, cam, heads shaved and rebuilt, new double row timing chain, oil pump, lifters and springs. New Manifold, radiator, rebuilt auto, 3000 dominator stall, new front and rear brakes and front shocks, new steering rack and new tailshaft. Brand new rod shop conversion kit and new exhaust. New fuel reg, lines and fittings. New in tank walbro pump, new manifold. New mini low mount A/C pump installed

Epping VIC, Australia
Share
Watch
8
Nissan Silvia S13 reconditioned stage 2 engine. Black top SR20 with S15 turbo. Race seats, fully adjustable suspension, no rust, large sump, large alloy radiator with 2 electric fans. Very tidy race car, comes with heaps of spares, engine, doors, wheels, tyres, etc.

Gladstone QLD, Australia
Share
Watch
10
PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l

Black River QLD, Australia
Share
Watch