11 Road, Drift & Performance for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
5
Roll CageLog Book
1984 Toyota AE86 Sprinter, Motorsport Australia Logbook. 4AG 1600 twin cam with 4-2-1 extractors. T50 5 spd manual transmission. New Exedy OEM clutch. Timing belt, tensioner, water pump, crank and cam seals replaced June 2019. Cusco strut brace. Aero bonnet latches, Front Tow hook, Rhino Alarm & Immobilser 6 point Motorsport Austrlia approved roll cage. Cobra Monaco Pro driving seat on RPM seat side mounts. Ecliptech SHIFT-i shift lights. Mains battery power shutoff switch. 4.3 LSD.
71
Here is yet another stunning example of a SS Group A Walkinshaw. Once again, this car was originally part delivered to the D’Alberto Holden dealership in Echuca Victoria and kept with the D’Alberto family as part of their private collection until 2018 which was never registered and still remains unregistered with its original blank logbook meaning you could be the first private owner of this very special HSV. In that time the car was only used for maintenance purposes and to this day has only cl
14
Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough
12
Project car regrettably up for sale 4AGE-ZE motor with LA3 mod plate Cast iron Celica 5-speed gearbox Shortened Hilux diff 15” Simmons wheels Front mounted intercooler behind bar Very clean underneath, no rust in chassis Interior mostly complete, missing a couple of mouldings in boot area Exterior in good condition, a couple of small rust spots, nothing major Motor not currently running Will require ECU and partial rewire Selling due to not having enough time - have had the car for 8 years
27
Roll CageLog Book
2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu
14
VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun
6
Log Book
FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL
10
Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.
26
2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg
10
PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l
54
They don’t get much wilder than this!! An out of this world take on the iconic Holden One Tonne ute!! Personally built by the current owner and now ready to be enjoyed and showed by the next owner. The whole car is impeccably detailed with hundreds of hours invested into making this car stand out from the crowd. From the 800+ horsepower 540 big block Chev and the totally unmissable 10/71 Blower Shop blower with full billet hat!! The custom blue metallic paint, HZ front clip, custom interior and