43 items between $30,000 & $50,000 for sale

2018 Subaru BRZ TS 45,XXX KMS Ideal Street and Track Car, built with supreme reliabilty and performance! Engine Modifcations: -Invidia N1 Cat Back Exhaust -Tomei Equal Length Headers with Over Pipe -Zeitronix Flex Fuel -Cosworth Inlet Hose -Perrin CAI -EcuTek Race-Rom Tuned By S&J Automotive Suspension & Brakes: -Upgraded STI Brembo Brakes to Spec R STI 6 Pot Front Calipers with Endless PC35 Pads/DBA T3 Discs -MCA Street Series Coilovers -Whiteline Rear Sway Bar -Whiteline Gearbox Mount B

This Minetti has been a total rebuild of electrical with all Haltech equipment. This includes IC7 Display Dash, 2500 Elite ECU, 02 Wide Band Sensor, HPI4 Power Ignitor. The engine is a Gen 2 -1340cc Suzuki Hayabusa with 8 injectors and has the low profile sump with a 360 degree swivel pick up. The body is a new 1 piece lightweight version. Other equipment includes, new 6 point harness, MCA fully adjustable shockies front and rear, new Avon tyres only 2 meetings old, Dyna jet quick shift for flat

Good track car for the road. My daily drive. Auto box. Nissan high performance, naturally aspirated engine, with handling to match. New engine, 4000cc engine with less than 10,000 kms on it. No nicks, no dents, no scratches -- immaculate! Inside and out; and under the hood. This car has never done a burnout or laid any rubber; never been on the track. Lots of power -- especially torque. Good set of Pirellis with some time left on them. Very noisy when provoked. Custom leather interior plus a

400HP atw GC8 WRX - July 2000 Freshly detailed and polished. Car has just been finished. Has fresh front wheel bearings and will replace rear ones before sold. Mechanic owner. Engine EJ207 99-00 Heads Kelford 272 cams Billet cam seals Fuji Racing Billet breathers Springs, retainers and 1mm over sized valves ARP head studs GTPS02-712 Turbo External GFB gate and GIR up pipe Gate blended back into the dump pipe Nuke catch can ID1050x Injectors Top feed rails GFB FPR -8 Fuel lines and fitting

Our Hyundai Excel is a race winner and a well prepared car. The previous owner was Brock Feeney and since then the car has had quite a bit of work. All the upgrades are new and the car has not been tracked since this work has been completed. We had a full engine rebuild at Norwell Motorplex, interior paint, new flocked dash, strengthened cage, new race seat with triple 8 sliders, triple 8 floor plate and many other extras. There is a new set of SUPASHOCK RACING SUSPENSION as well.

Turn Key Racing Built RB26 engine with mild cams, custom piping (Titanium Intake). Moderated tune to 586hp RW on e85. Well sorted and proven track car with major suspension component and brake upgrades. Has current Qld Club rego (with Mod Plate). Limited Sprint use only (Lakeside/Morgan Park/ Bathurst). Car has performance well beyond its aging owner but due to retirement (Read No Income) needs a new life. Have a full list of what has been done on this car for those with serious interest.

***price drop*** 3 litred 1996 R33 GTS-t s2 I have owned the car for 15 years in which time it's sadly seen minimal use. Made approx 350rwkw last week on run in tune at only 13psi on pump fuel. Fresh engine, ground up forged 3 litre build. Less than 1,000km. Ready for e85 and boost. Z32 5 speed. All custom arms and mondified subframe. Original interior for the vehicle re installed with no peices missing except a leather gear boot. Car will have full detail and stickers removed for handove

Nissan S13 Silvia with S15 front RB26DETT fresh -7’s Forged internals Nitto oil pump & collar Remote oil cooler & filter Custom catch can & overflow HKS cams (264 9.1) HKS injectors, Bosch fuel pump Custom front pipe & side pipe Motor originally built by Top Fuel Japan, has had rings and bearings done since, linished & straightened crank, new rods & pistons. Nitto head gasket Rb25 gearbox with 26 internals (better synchromesh etc) 200mm xtreme twin plate clutch Nissan 4 pot front brakes DBA roto

Z31 professional strip down to body shell , painted , roll cage installed & built by race car manafacturer for racing , Car has completed many Targa Tas & Targa events , circuit racing and Hill climb & various other forms of motor sport events , fully rebuilt low compression engine , forged internals , large pelenium manifold , custom ECU , oil , fuel & power steering coolers , Adjustable height & firmness control hydrolic dampners on all corners , massive tripple piston GT Racing calipers with

1999 Subaru WRX Impreza GC8 Car has been built and modified for Track day and Sprint use. Car was developed on the emphasis of handling and reliability, whilst maintaining a clean car that presents well. Car can be returned to Road registered if required. I still have all original parts and interior pieces. Engine has been built by Subaru Hamilton, and has a EJ207 STI engine installed - Semi closed Deck. - 14mm ARP head studs - DeatschWerks 1000cc Side feed injectors - Haltech PS1000 Tuned on

Skyline R32 GTR Log booked sports sedan 3D with compliance plate. Eligible to Compete in: NSW/National sports sedans, for the last 5 years it was a class leading car. At Combined sedans bathurst 12hr chassis class it was on pole and had 2 race wins, raced Tin Tops bathurst, SMSP lap time 1.38, Bathurst 2.20, Super TT race wins, World Time Attack, Wakefield 1.03. Can compete in many classes. Eligible to enter the support race sports sedans at the bathurst 1000 in 2023 subject to category invit

2000 Subaru WRX Race car/Track car/Hillclimb car Car was built from a road car 5years ago, every nut and bolt has been turned on the car. Has been painted inside and in the engine bay gloss white in 2pac, wheel wells have been painted with septone black sound deadener. Has state level bolt in cage done by bond rolls bars and is registered. All other upgrades and work is listed below any other questions or enquires please feel free to message or call me, inspections can be arranged. Can help wi

1997 Japanese import v4 STI 90,610 km. Alloy bonnet swapped to standard at some time prior to 2002. Modified for circuit racing and tarmac rally with emphasis on reliability and handling. Fully registered in Tasmania since 2002. Driver's seat belt operational. Roll cage – CAMS logbook. Battery isolation switch with removable key, window net. Engine rebuilt by Robin Berado and associates in Brisbane. Street force modified heads, closed deck block (welded). Billet con rods, forged pistons and c

Whether you are looking to race or register, this Nissan 180SX represents a unique opportunity to get your hands on a truly special piece of automotive engineering. Built with an open chequebook by the Wizards at 'ARE' back in the mid 2000's, this car was designed to destroy just about anything at a dyno compettiton with its LC Engineering Toyota 3RZ under bonnet, turning out a truly astonishing 782hp atw on a mere 29PSI of boost. The engine was designed and built to run up to 50psi, so you ca

MY06 Sti (Terry) 293kw @ 24psi High boost E85 274kw @ 20psi Low boost E85 Link ECU, Deatschwerks 1300cc injectors, Engine Rebuilt at 93,920km now 103,000 New short block, Bored and honed to +10. Manely piston, rings and pins. Nitto I beam, Nitrated crank. Race bearings (Con Rod and Mains). 11mm APR Studs. Cosworth baffle plate. Twin plate clutch APS Turbo Sr57, APS intercooler and blow off valve. Spec C Intercooler sprayer bottle Cermic coated headers Custom fuel surge system PWR radiator TS

Major upgrades include, uprev tune 5 stage by rev zone, 230kw @ 6764rpm (315kw at fly wheel) coil overs with eibach linear springs - 9.5kg rear / 11kg front. Cusco RS 1.5 weigh LSD Z1. Motor sport dif cooling cover AP racing 6 pot front brake kit with endless ME20 pads. Akebono 2 piece rear rotors with endless ME20 pads. Stillen front splitter Stillen front canards. Z speed aluminium under shroud. Rev Zone custom front alloy under tray. Evo R rear wing, Stillen gen 3 long range intakes, Stillen