69 items for sale

Mx5 RACE CAR 1991 NA THIS VERY WELL KNOW RACE CAR IS NOW FOR SALE. 2B LOG BOOKED OURRIGHT WINNER OF THE CUE ENDURO SERIES MANY CLASS WINS INCLUDING LAKESIDE, QUEENSLAND RACEWAY, MORGAN PARK AND PHILLIP ISLAND. ALSO RACED AT BATHURST. VIDEOS AVAILABLE FOR ALL CIRCITS. ENGINE LAST FULL REBUILT IN 2018 BUT VERY FEW SPRINTS SINCE THEN AND NO RACES. ESTIMATE 5 HOURS ON THE ENGINE. NEW UNRACED BLOCK, STEEL MAIN CAPS. STEEL OIL PUMP GEARS. ACL RACE SERIES BEARINGS WITH NEW SEALS CRANK LIGHTENED BY 2.

Mazda RX2 GroupNc (log booked) race car. Matt Russell Ported 12A Bridgeport(New build). New carb and manifold, new hand made headers and exhaust to suit. New housings, carbon seals, Billet superlight flywheel, twin plate clutch. all the fruit!! 4 spot front calipers. Full floating axle RX2 diff 4.4/1, 4.7/1 and 5.1/1 ratios. 2 x Needham 4 speed Close Ratio Gearbox's, one in the car one spare. 3 x Sets of wheels all with usable tyres. Coilover Koni adjustable shocks all round. Near complete set o

Audi S3 Sedan Logbooked 3D Sports Sedan 4cyl 2L turbo awd Turnkey, logbooked and ready to race. This is a well-developed 2010 Audi S3 sedan classified as a 3D Sports Sedan under Motorsport Australia. Nothing to do load it on the trailer and go racing. Would also transition to circuit racing with minimal changes. Comes with a substantial spares package. Engine & Drivetrain - 220kW / 440Nm at all four wheels - Engine recently refreshed with new bearings, rings, tensioners, chains and belts (les

#43 Racing 1982 Series 2 Group C RX7 Built as a tribute to Allan Moffat and his championship winning Peter Stuyvesant's Factory Team car. The car was viewed and approved by Allan with the dash signed by him. The car was also used for one his final interviews. Built by me in 2010 and has run every season since in Heritage and Historic race meetings. Alec Bell from KiwiRE and MADLAB has worked with me to develop the car to where it is today. The overall car has been continuously developed and

Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original

This car was one a few Swifts built by Greg Cox at GMC Motorsport. Greg had intended to run a series similar to the Excel cup but it never got off the ground. This car is log booked as a 3E Production car with CAMS/MA Logbook. We bought this car to give the kids a start into motorsport, and it was the perfect choice. It is extremely well set up, and has never missed a beat. It is fitted with MCA gold non canister shocks all round, a clutch type LSD, slotted rotors and Winmax pads up front. It

Rainbow Warrior Piece of racing History. Car 1 of 2, 808 coupes built into rx3 by Terry Lewis for IPRA in 90’s. Only surviving race car of the 2. Fresh built 13B Bridgeport using brand new housings. 1 race meeting since rebuilt. Injection Perfection throttle body Haltech Elite 1500 S5 rx7 box with Albins close ratio gear set. Mazda LSD Bond Alloy roll cage 14” globe wheels Well set up race car that is a blast to drive. Body is not perfect but presents well with minor rust in engine bay

De-registered MX5 (MX-5 or Miata) NB SE Turbo (Never Been in an Accident) 76,000km in Chassis, 300km in Engine Since Rebuilt with Forged Internals & Supertech Valvetrain, Factory SE Turbo Full Mods List: - Adaptronic ECU - Mania Intercooler & Radiator - Mania Exhaust - Oil Catch Can & Oil Cooler - Poly Engine Mounts - New HD Clutch - Yellowspeed Coilovers - Yellowspped 6 Pot Calipers with 330mm Rotor & DTC Pads - Full Superpro Bushed Suspension - Extended Lower Ball Joints - Artka 17 x 9 Racin

Price reduced for immediate sale. Unique car opportunity. Serious buyers only. Originally commissioned for the Victoria Police, this 2004 VY Series II Executive has been professionally transformed into a high-performance street/strip powerhouse. This isn't a budget home-job; this is a car with a high-end, turn-key driveline. THE DRIVELINE: Engine: LSA-Supercharged LS1, HTP Cam package, upgraded oil pump & lifters. Power: Dyno-proven 590rwhp (approx. 790hp) on 12psi. Fuel: Surge tank upgrade

Original engine, still running strong Always warmed up before driving Only BP 98 260kW @ 16psi MODS Performance COBB Accessport COBB Front Mount Intercooler Tial External Wastegate CorkSport HPFP CST4 Turbo (EWG setup) CorkSport 3” Intake + 3.5” MAP Sensor CorkSport 3.5” Turbo-back Exhaust (with downpipe) CorkSport Boost Control Solenoid CorkSport Oil Catch Can Handling D2 Coilovers Whiteline Sway Bar Kit Whiteline Lower Control Arms Whiteline Engine Mount Hardrace Mount Pack Transmission BL

Targa-Spec Mazda MX-5 | 2.5L Engine Upgrade Road-registered and stage-ready. This MX-5 was built in 2022 specifically for Targa Tasmania, centered around a high-torque engine conversion that eliminates the limitations of the stock powerplant. The Build: 2.5L Performance - Engine: Upgraded Mazda 2.5L swap, professionally tuned for reliability and stage performance. - Suspension: Full Pedders Adjustable coilovers. - Wheels/Tyres: 17x8-inch wheels with Nankang CRS (50% wear). - Capability: Signifi

1999 Japanese Spec NB1 Track Car (non VVT) ECU is a BP5A – 7500 RPM limit and no EGR Valve. Extensive renovation / improvement in my ownership - quite literally there is nothing left to do! Suspension/Steering/Tyres NEW Il Motorsport 30% uprated bushes throughout – 8 front, 14 back. NEW Il Motorsport Competition Diff Bushes. NEW Top Ball joints NEW Extended (10mm) Lower Ball joints (more negative camber). NEW Track Rod Ends. Rebuilt BC (BR Type) Coil overs. NANKANG CR-S Semi slicks – 195/50 x

Mazda 1993 Rx7 FD Type R1, with original very low kilometres 93,000. Currently UNREGISTERED and with NO COMPLIANCE( Japan import). Mechanicallly perfect. Compression recently tested and very good. Turbos and oil/vacuum lines inspected and replaced where necessary. Car is completely stock except for exhaust, ARC airbox and 18inch wheels with Kuhmo tyres. Comes with original exhaust and airbox. I have owned the car for 26 years and always kept undercover and in a garage. I have only done the occas

SB automotive offers for sale , their highly developed & successful MX5 cup NA series mx5. The car is offered with a generous spares package. We are open to offers on CAR & spares package, or just the car. Please note none of the spares are available until the car is sold. The car is entered in the round 3 MRA /MX5 cup at SMSP on the 16th of May for anyone who is interested. Car details & spares package is listed below. Vehicle has MA log book SBAUTO MX5 race car specifications Engi

Mazda Mx5 Nc 2500cc HKS Supercharged - Power 300+ WHP PRICE SLASHED FOR A QUICK SALE!!! After many years of developing and racing this car, I’m selling my quick little MX5. This car will suite someone wishing to drive to a circuit and still be up the sharp end on track days. The power to weight ratio, brakes and handling of this car embarrasses exotic machinery costing 10 times the price. This car has done a sub 60s Lap time at Lakeside in Queensland with me driving it and I’m sure with a ligh

Audi RS3 for sale. The vehicle has only 154 kilometers on the odometer but is a statutory write-off, meaning it cannot be registered for road use in Australia. This car is an ideal choice for track days, gymkhanas, hill climbs, closed road rallies, or circuit racing. Alternatively, it would serve as an excellent donor car for a VW Golf or Audi A3 project, as it contains many high-value parts. The previous owner originally purchased the car at auction as a backup for his race car and never used

PRICE UPDATE: Now $33k Ready to race, sprint or hillclimb with a dual axle trailer! Sadly, it is time to sell my beautiful Mallock Mk31 clubman sports racer as my time circuit racing has come to an end. This is an English car built in the Mallock factory and is chassis No.1. It was completed shortly after Arthur Mallocks’ passing and was the first car by Mallock to be CAD. The car comes with a dual axle custom made trailer and many spares. It has a fully documented log book and has had a long

I'm listing up my 2005 Mazda RX8 - 6 speed manual for a regretful sale. This is a fantastic car for fun tarmac rally, circuit, or just drive it on the road. It is still fully road registered (not club etc) and if desired you could return it back to factory spec. I deliberately kept the build modest so future owners could return things to original, or go wild and continue to build. I would love to keep this car; but the reality is that it sits in the shed all but 7 days a year. I have another R

An original 1973 10A RX‐3 sedan that had been looked after, very nice car to drive with an honest body, this one is ready to enjoy - it’s a street‐friendly rotary package. Originally imported to New Zealand from Japan and then here to Australia 4 years ago by myself. 13b Bridgeport, rx4 block, Ida 48mm, rx7 gearbox 5 speed, Extractors, exhaust upgraded, adjustable front suspension with adjustable camber plates, lowering blocks in the back and an LSD differential. The interior is mainly orig

Awesome Targa, Race, Hillclimb, Motorkhana, or Drift Commodore Ute. Full TAS Road Registration. CAMS log booked and CAMS approved internal and external roll cages. 383ci stroked LS1 - CP Billet forged pistons - Scat H beam rods - Lunatai Voodoo Crankshaft Nitride - Racing sump baffle - Stage 3 Race Cam engine built for all day Targa events, so reliability was the main focus - 2x sets 18" HSV VY wheels with race tyres - 6 speed manual with race clutch - D2 8 piston front callipers and D2 6 piston