46 items for sale

Mx5 RACE CAR 1991 NA THIS VERY WELL KNOW RACE CAR IS NOW FOR SALE. 2B LOG BOOKED OURRIGHT WINNER OF THE CUE ENDURO SERIES MANY CLASS WINS INCLUDING LAKESIDE, QUEENSLAND RACEWAY, MORGAN PARK AND PHILLIP ISLAND. ALSO RACED AT BATHURST. VIDEOS AVAILABLE FOR ALL CIRCITS. ENGINE LAST FULL REBUILT IN 2018 BUT VERY FEW SPRINTS SINCE THEN AND NO RACES. ESTIMATE 5 HOURS ON THE ENGINE. NEW UNRACED BLOCK, STEEL MAIN CAPS. STEEL OIL PUMP GEARS. ACL RACE SERIES BEARINGS WITH NEW SEALS CRANK LIGHTENED BY 2.

Mazda RX2 GroupNc (log booked) race car. Matt Russell Ported 12A Bridgeport(New build). New carb and manifold, new hand made headers and exhaust to suit. New housings, carbon seals, Billet superlight flywheel, twin plate clutch. all the fruit!! 4 spot front calipers. Full floating axle RX2 diff 4.4/1, 4.7/1 and 5.1/1 ratios. 2 x Needham 4 speed Close Ratio Gearbox's, one in the car one spare. 3 x Sets of wheels all with usable tyres. Coilover Koni adjustable shocks all round. Near complete set o

#43 Racing 1982 Series 2 Group C RX7 Built as a tribute to Allan Moffat and his championship winning Peter Stuyvesant's Factory Team car. The car was viewed and approved by Allan with the dash signed by him. The car was also used for one his final interviews. Built by me in 2010 and has run every season since in Heritage and Historic race meetings. Alec Bell from KiwiRE and MADLAB has worked with me to develop the car to where it is today. The overall car has been continuously developed and

Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original

Rainbow Warrior Piece of racing History. Car 1 of 2, 808 coupes built into rx3 by Terry Lewis for IPRA in 90’s. Only surviving race car of the 2. Fresh built 13B Bridgeport using brand new housings. 1 race meeting since rebuilt. Injection Perfection throttle body Haltech Elite 1500 S5 rx7 box with Albins close ratio gear set. Mazda LSD Bond Alloy roll cage 14” globe wheels Well set up race car that is a blast to drive. Body is not perfect but presents well with minor rust in engine bay

De-registered MX5 (MX-5 or Miata) NB SE Turbo (Never Been in an Accident) 76,000km in Chassis, 300km in Engine Since Rebuilt with Forged Internals & Supertech Valvetrain, Factory SE Turbo Full Mods List: - Adaptronic ECU - Mania Intercooler & Radiator - Mania Exhaust - Oil Catch Can & Oil Cooler - Poly Engine Mounts - New HD Clutch - Yellowspeed Coilovers - Yellowspped 6 Pot Calipers with 330mm Rotor & DTC Pads - Full Superpro Bushed Suspension - Extended Lower Ball Joints - Artka 17 x 9 Racin

Original engine, still running strong Always warmed up before driving Only BP 98 260kW @ 16psi MODS Performance COBB Accessport COBB Front Mount Intercooler Tial External Wastegate CorkSport HPFP CST4 Turbo (EWG setup) CorkSport 3” Intake + 3.5” MAP Sensor CorkSport 3.5” Turbo-back Exhaust (with downpipe) CorkSport Boost Control Solenoid CorkSport Oil Catch Can Handling D2 Coilovers Whiteline Sway Bar Kit Whiteline Lower Control Arms Whiteline Engine Mount Hardrace Mount Pack Transmission BL

Targa-Spec Mazda MX-5 | 2.5L Engine Upgrade Road-registered and stage-ready. This MX-5 was built in 2022 specifically for Targa Tasmania, centered around a high-torque engine conversion that eliminates the limitations of the stock powerplant. The Build: 2.5L Performance - Engine: Upgraded Mazda 2.5L swap, professionally tuned for reliability and stage performance. - Suspension: Full Pedders Adjustable coilovers. - Wheels/Tyres: 17x8-inch wheels with Nankang CRS (50% wear). - Capability: Signifi

1999 Japanese Spec NB1 Track Car (non VVT) ECU is a BP5A – 7500 RPM limit and no EGR Valve. Extensive renovation / improvement in my ownership - quite literally there is nothing left to do! Suspension/Steering/Tyres NEW Il Motorsport 30% uprated bushes throughout – 8 front, 14 back. NEW Il Motorsport Competition Diff Bushes. NEW Top Ball joints NEW Extended (10mm) Lower Ball joints (more negative camber). NEW Track Rod Ends. Rebuilt BC (BR Type) Coil overs. NANKANG CR-S Semi slicks – 195/50 x

SB automotive offers for sale , their highly developed & successful MX5 cup NA series mx5. The car is offered with a generous spares package. We are open to offers on CAR & spares package, or just the car. Please note none of the spares are available until the car is sold. The car is entered in the round 3 MRA /MX5 cup at SMSP on the 16th of May for anyone who is interested. Car details & spares package is listed below. Vehicle has MA log book SBAUTO MX5 race car specifications Engi

Mazda Mx5 Nc 2500cc HKS Supercharged - Power 300+ WHP PRICE SLASHED FOR A QUICK SALE!!! After many years of developing and racing this car, I’m selling my quick little MX5. This car will suite someone wishing to drive to a circuit and still be up the sharp end on track days. The power to weight ratio, brakes and handling of this car embarrasses exotic machinery costing 10 times the price. This car has done a sub 60s Lap time at Lakeside in Queensland with me driving it and I’m sure with a ligh

Lotus Elan Series 2 DHC. Car has had the following work recently completed, twim cam engine and head rebuilt. Gearbox and diff fully rebuilt also. New solid rear drive shaft conversion installed along with new front suspension bushes and rebuilt steering rack. Rear hubs rebuilt and uprights fitted with new adjustable Spaz shocks. Also included is a 26R body kit. Power unit requires installation. Selling as I have too many Elans. Located in Brisbane.

An original 1973 10A RX‐3 sedan that had been looked after, very nice car to drive with an honest body, this one is ready to enjoy - it’s a street‐friendly rotary package. Originally imported to New Zealand from Japan and then here to Australia 4 years ago by myself. 13b Bridgeport, rx4 block, Ida 48mm, rx7 gearbox 5 speed, Extractors, exhaust upgraded, adjustable front suspension with adjustable camber plates, lowering blocks in the back and an LSD differential. The interior is mainly orig

It's a Lotus, but not just any Lotus. The original 'Series 1' Lotus Elise is still considered one of the most well balanced light weight sports cars, offering pure driving nirvana. But improvements to this Elise have taken it from 'great' to 'brilliant'! In 2012 the original Rover engine was swapped for an almost new K20 from a Honda Integra Type R (Sunspeed conversion). As such the engine kms are actually only 35,000. Also included: • Full engineering • New Mugen gear box • LSD Kazz 2

Registered Race Car Built for Targa & Road use 2019 Lotus Exige 410 Sport Roll Cage Fitted by Lotus Aust Bolt in front half for registration Race Harnesses Fitted Retains Factory Seat Belts Spare set of race Wheels Only 9,500 K’s One very sad owner

1990 Series 5 rx7 - Aussie delivered Cams Log booked Original books and history Set up for tarmac sprint 13B turbo Microtech ECU Approx 400 HP Recent compression test available BC coil overs Strut braces Full cage with removable front section Fibre glass vented bonnet Terratrip ( never used it ) Comes with spares Ready to go racing Very fast, very reliable Could be returned to the street if you had the time and some interior pieces Great for someone that wants to get out there and

Exige S MY07 for sale $65000. 56304 km. Registered in Victoria Starlight black, leather seats, Super Sports pack including adjustable shocks, adjustable ride height, adjustable front roll bar and lightweight forged alloy 7 spoke wheels with semi slick road/track tyres. Later upgrade with SSC Adaptronic ECU and smaller super charger pulley, larger injectors and fuel pump, lightweight muffler. Recorded 238hp at the wheels on dyno. Recorded 1.52 lap time at Phillip Island but could do better. Ex

1957 Lotus Eleven Series 1 Chassis MK 11267, originally manufactured by Lotus engineering in London February 1957 and only 150 units of Lotus Eleven Series I models were produced worldwide. This example offered here is a Series I model fitted with a 1,100cc Coventry-Climax sohc engine in Stage II tune producing a claimed 84bhp at 6,900rpm. Chassis number ‘267’ was raced in England as late as 1979, being most successful in its class in unlimited historic sports car races. It features a De Dion re

Price massively reduced... 1979 Mazda 323 rwd 2-door rolling chassis. Last raced in Improved Production in 2022, it is set up with engine mounts for a Mazda BP engine. Would be an easy rotary swap if desired. Motorsport Australia log booked 3J (first raced in 2020). Extensive but lightweight cage built by Craig Wildridge, including bars through to the front strut towers. Double adjustable dampers by Suspension Concepts, with RaceProducts full cambered floating diff (28 spline RX4/S2000 cen