92 Circuit Racing for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
9
Roll Cage
Mazda RX7 Series 5 FC 1991 Race Car. 13B Bridge Port Turbo ( built by South Coast Rotary) . 2 way LSD , GT 35R Garret Turbo , Microtec ECU , New Exeedy carbon twin plate clutch.2 sets of wheels. Rear wing, New fiberglass front splitter. Inter cooler and radiator as per pictures , OMP seat, New adjustable racing suspension. New rotors and pads . Heaps of spares. Available as a roller ( less engine) for $18,000 . Would make great drift car. Car is located in Kempsey NSW,
8
Roll CageLog Book
BMW M135i " Bathurst 6HR ready" "APC ready" Group 3E production complete with full MA Group 3E recognition papers Low milage New 6 Speed manual gearbox Logbook Full FIA Roll Cage New Turbo & Boost modules New Diff cooler & pump Motec Dash with upgraded data fields Fuel surge Tank with dual pumps and flex All fuel lines are fully braided with alloy race fittings. New Dual fuel pumps working in sync to allow full pressure and fail over. Dry Brake and Fuel cell (recertified for 5 years
8
Roll CageLog Book
BMW E30 M3 DTM/GrA 1988 Alpina Racing Car like new! Build with all the right components by Vink Motorsport Bodyshell: All the work to the body includig the rollcage by Matter Motorsport Engine: S14B23 by Bosch Tuning 323BHP/315Nm (0 KM after check) Gearbox: Getrag 265 housing with Samsonas internals 6-speed Dogbox (0 KM after check) Recaro seat, Schroth harness, Hand Fire extinguiser. All in date! All fluids new. Equiped with airjacks. (krontec lance) In total 14 wheels. All the cor
12
Roll CageLog Book
*********** MUST SELL ASAP MAKE AN OFFER *********** Meticulously and professionally built specific for Targa and ATR, this car came 3rd in the 2022 ATR Championship EM RWD category. Due to some very recent health issues I need to simplify and move this on. It can be very easily set to run circuit. The car is quick and handles amazingly! Open to offers. Upgrades are are huge but include: - National Spec AGI Cage - DCT Box - VRSF Catless Down/Charge - M3 Front end - ADVAN suspension tune and se
6
Roll CageLog Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car
8 1
RegisteredRoll CageLog Book
Need to sell - already bought another toy! 70,000kms - 2ZZ Engine (NA) Currently full rego in TAS (was a repairable write off but has been cleared and has full rego - have pics of damage/repairs from previous owner). Ex-Exige Cup race car with full cage, CAMS logbook etc. Ohlins shocks Bigger front brakes Spent 3k on new Extractors and exhaust New hollinger 3rd/4th gear upgrade. Fully serviced recently (all fluids) and wheel aligned. Super reliable cheap fun that can hassle much faster cars a
7 1
Roll CageLog Book
BMW e46 m3 Sports sedan, as raced in the national sports sedan championship finishing 3rd in the last 3 championship seasons. -Aerodynamically enhanced carbon fiber body work -SB2.2 nascar engine, individual throttle bodies, drive by wire -Paddle shifted holinger rd6s -Motec m150gprp with upgraded logging, c187 data logger, motec pdm, all the allowable creature comforts such as traction control. -Double wish bone front end with billet uprights, live axle 3 link rear with camber adjustment, Ohl
5
Registered
Vrsf downpipe Vrsf midpipe Armaspeed cold air intake Hardrace rear upper control arms Hardrace front sway bar end links SPL front thrust arms bushing SPL/Turner motorsport front lower control arms Hardrace rear toe links x2 pairs Hardrace rear traction links x2 pairs Turner motorsport rear sway bar end links White line sway bars Turner motorsport diff bracket/poly bushings KMP steering wheel Nitron R1 racing suspension Alcon CAR89 BBK Pagid RSL29 pads Alcon 380mm rotors Recaro RSG Fia Recaro
27
Roll CageLog Book
NSW and Australian Super sprint Championship winning vehicle, multiple times. Only selling due to moving interstate and downsizing property and ability to store and maintain multiple vehicles. Ok here we go. Bond Roll Bars weld in cage with roof cross bars, Carbon Fiber Hard Top, Garrett 2870 High Mount Turbo system with Haltech Engine management system, 165kws at the wheels on the Dyno at only 13 pounds Boost. Engine and Gearbox and clutch in great condition. Locked differential, New exhaust s
7
Roll CageLog Book
Built in-house by our team at Lynton Motorsport (Bruce Lynton Service). Sister car to the 2019 and 2021 Bathurst 6 Hour winning cars and 2022 APC Championship winning car. Car has won races and had round wins in both QPC/APC. Car is built using top brand parts; • PWR Coolers: Radiator, oil cooler, transmission cooler, diff cooler, side cooler • Drexler LSD Diff • Team Dynamic wheels (4 sets), • ATL 100L Fuel Tank with dry break • Vbox 2 Camera system • Motec dash • BM3 Tune • AP Front and Rear
4
Great track car, production sports car or perfect targa car Dry break fuel system with extra fuel tank 110 liter total capacity Rebuilt gearbox at start of the year (2019) Nitron 3 way adjustable shocks Moroso oil accumulator 3x sets of wheels and new tyres (2x slicks 1x wets) Motec C127 dash AP racing brakes all round Aftermarket aluminum sump Rampage in car drink system Cams log book
7
Roll CageLog Book
The ex Grand Prix Mazda/Murray Coote Group C Touring Car and Group A Rally Car. Raced in the QTCC and some ATCC races 1982-1984 winning the Under 2L class of the QTCC in 1983, in 1985 it was converted to a Group A rally car, winning the Queensland Rally Championship that year, and the QLD round of the Australian Rally Championship. 1982 Mazda 323SS (not Familia) with twin carbs, 5 speed, pedal box, healthy refreshed/dynoed engine. Part converted back to Group C specification, requires some bo
17
Roll Cage
1960 Lotus 18 Formula Junior Frame 987193. body plate 18/J/789 (attached to car). Sold in batch of six too Raper Rodriguez. raced by A Álvarez in 1961 in support race to the 1961 Grand Prix. Copy of race program available. History thereafter hazy but Bill Jowarski , Don Hamilton and Burt Kurtis (1980) seems to have owned/raced in USA. Bought in 2011 to Australia by Rob Hanns and Steve Lunn. Purchased in part by G Dell in 2018 and totally rebuilt. Chassis repaired by Elwyn Bickely and gearb
13
SVG Bathurst 6 hr winning BMW M4 Includes entry to Bathurst 6 hr 2023 Price includes Entry to 2023 bathurst 6 hour. Bathurst 6 hour results - 2021 winner - van Gisbergen Smollen Rubis 2022 3rd outright - Percat Smollen Rubis No expense has been spared in this lightly raced and highly competitive production car which was piloted by SVG to Bathurst 6 hr victory on debut ( #97 ) and again making the outright podium in 2022 with Nick Percat.
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
14
RegisteredRoll CageLog Book
Lotus Exige 2004, Motorsport/ track day hillclimb timeattack competition car. 15900 kms. Current NSW Registration. Cams log booked, with factory Lotus sport roll cage. Race prepared Toyota 2ZZGE ,1933CC, forged turbo engine with Garret GTX Turbo. 14.5 PSI, produces 320KW at the wheels on 98 Octane fuel. 3 Stage dry sump oiling system. Motec M400 engine management. Custom E153, 5 speed, MR2 transmission, with Cazz limited slip differential. Custom twin plate Excedy clutch and Cro-moly fly wheel,
15
SLASHED THE PRICE FROM $140.000 TO $100.000 !!! I would like to have more room in the garage for another car. My pain your gain !!! 1969 Corvette Hard Top - Group S log book SBC 350 - RHS heads . Built by Matt Reid of Advanced Motorsport Solutions. Perth M22 by Paul Cangiolosi of Medatronics USA Differential by Tom's and Gary Ramadei So Cal manual car, so no rust in the subframe. Built following Chev power book and recommendations from Guldstrand and Greenwood , and using an
7
Roll Cage
This car is a BMW M8 (original e31) tribute car. It is a RHD race car which was rebuilt from an 850CSi originally raced in the UK Substantially upgraded, repainted to ‘Hellrot’ and rebuild by RaceFx at Hampton Downs over two years, to replicate the unique e31 M8. Full cost of makeover at $300K+ ( not including the cost of the car). The body work around the rear wheel vents and front and rear mudguard flares is steel and the bonnet and the nose and front sub spoiler are in fibreglass. She was lig
5
Roll Cage
This 72 Camaro is a project I started to build for the Australian Tans Am class. It has been caged and had the floor modified to suit the correct gearbox and where the muffler will sit. It has also had the pedal box master cylinders installed. The only thing missing is the 2 front guards. The car will also come with 2 brand new full quarter panels, a fiberglass bonnet, new race seat, pedal box, race fuel tank and brand new limited slip differential from the US. I have spent $25,000 to date
12
Roll CageLog Book
World renowned sports car & race car. This C6 has been progressively been built with ease of use & reliability in mind. With a long list of extras this is a car that a slightly experienced or seasoned racer can jump into with ease. the list of extras include:- Z06 carbon/glass guards to cover the 10" x 18" wheels. Includes 2 spare sets. 1 set with slicks, 1 with wets. the engine is an LS3 with a modified cam shaft. Short throw shifter, 6 speed Tremec T6060 Close ratio gear box. 4.1 ratio Getra