71 Sedan Race Cars for sale

MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.

E30 M3 Replica (unfinished project) Straight, rust free donor shell Fibreglass M3 body kit (doors and bonnet Mike Shaw Fibreglass NZ. Wings, rear window frame, front bumper assembly, boot spoilers etc from Pesch Motorsport). Fire barriers installed between boot area and cabin. 95% complete, ready for paint or vinyl wrap Roll cage built by Brad Stacy Fabrications (builder of Aussie Invader cage), log booked with CAMS. 6 point national rally spec. Full build photos at: https://bradstacyfabric

BMW 135I built for Bathurst 6hr, only 2 meeting old , finished 12th out right in 2022 . Car was built by David leny motor spot & helped by Barry graham. Car comes with spares we take to Bathurst, no money to spend and is ready for Bathurst 2025 . Car has Supashocks all round , new seat and belts Call chris for more info and photos.

Great entry level car, reliable quick and cheap to run. National Roll Cage Only V6 2.5 litre Galant / Legnum hologated with CAMS for production cars. LOG booked. Original motor 159kms, turbos HAVEN'T been played with Factory boost level. with Controller. Launch Control BC Adjustable Coil Overs plus top camber adjusters, new brake pads and oil catch can. Timing belt and Hydraulic tension done recently. GTO 4 spot calipers, still have originals 2 spot Loads of extras. 3 sets of rims and semi slic

MAZDA RX7 - BUILT IN 2016 - CAMS LOG BOOKED ROLL CAGE BUILT FOR RELIABLITY -13B BRIDGEPORT 2ND PLACE BATHURST CHALLENGE 2019 1ST PLACE OVERALL REPLICA TOURERS 2021 NEW ENGINE BUILT BY SIMON @ MACGREGOR MECHANICAL NISSAN SKYLINE FRONT BRAKES INJECTION PERFECTION MICRO TECH DASH SERIES 3 LIMITED SLIP DIFF - STRONG RELIABLE CAR NEW FUEL PUMP UPGRAGED SET UP. LIGHT WEIGHT COULD EASILY ADD GROUP C FLARES & WHEELS FOR A MOCK UP. PLENTY OF SPARES,INCL BONNETS,GUARDS,DASHBOARDS,NEW SPARE FRONT SPOILER

This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manuals Two Race Tech seats (great for t

Ex Mirage Cup Car bought with no prior damage, the car was raced in western australia under IP 1600 rules then converted to under 2ltr with no expense spared. Motor: JE pistons Carrillo rods Rubuilers crank Jun Cams Extensive headwork Dry Sump Butler tuned length extractors ( 10 hours on motor, comp is 250 on all cylinders) Gear box: RallyArt close ratio gearset Albins 5.1 crownwheel pinnion Kaaz 1.5 lsd Quatermaster 5.5 inch twin plate clutch ( 10 hours) Car: Motec m400 Custom ali fuel ta

For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.

Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),

Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.

Race and round winner in the Sports Sedan Vic State Race Series last time out, Sports Sedan or Improved Production race car , dry sumped 2.2 litre, fresh engine , Modena 5 speed just freshened , 6 pot and 4 pot calipers , supercar rotors , 3 way shocks , new turbo and exhaust , most of the running gear is one meeting old , Philip Island 1.38s Sandown 1.14s Fast car ready to race , multiple sets of wheels , spare drive shafts and other spares , 420 kw on 28 psi , you will not go faster for the

E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe with tags. It also still has the original VIC rego plate and CAMS log book. The car originally ran a Mazda Factory Race (MF

Well sorted,highly competitive Group NC HTC.nothing to spend.comprehensive spare parts package.Dyno tuned Korman spare race engine with manifold and carbies,six sets of wheels 13x6 and 13x7.5 speed gertrag gearbox and tailshaft to change car to five speed.spare close ratio four speed gearbox,spare panels,radiator,two lsd differentials 4:4 4:8..list parts available on request.car is available with spares minus spare race motor for $40,000.spare race motor available seperately for $18,000. .