22 Drag Racing & Hot Rods with Roll Cage for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
16
Roll CageLog Book
1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das
10
Roll CageLog Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,
19
Roll Cage
XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)
12
Roll CageLog Book
Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,
7
RegisteredRoll CageLog Book
Chevy Love with V6 Chev engine, TH 350 gearbox. Ford 9” with nodular centre, LSD 4-11 gears. Brand new tail shaft. Good straight rust free body. Brand new rear tub and guards. Good street or drag race project. $6000 ono. Call for more information.
7
Roll Cage
2006 Z28 Camaro Funny Car, N/A Methanol mechanical injection, 665BBC, has been running in modified, best time 7.76. Dart heads, Jesel rockers, Dominator TC, Brodix block. Supaglide Reid 2 speed box - 1.80 straight cut gear set, turbo input shaft, 8 top gear clutches, transbrake. 9 inch Strange full floater rear end. Engine and box have been freshened up ready for season but hasn't been run since 2019. Fire suppression, 2x chutes, Supajax car jacks + custom tools and trays for car for easy set up
6
Roll Cage
This is a nitro nostalgia funny car called the WARHORSE it runs 5.70 at 251 mph . Three motors, 2 speed Lenco. lots and lots of parts 2 bodies everything must go. truck and trailer also available for $50,000 USD. Call for complete listing 951-237-7501 (California time)
9 1
Roll CageLog Book
Current IHRA tech inspection and logbook. Selling to progress dragster. Tunnel ram Methanol injection on stroker SBC. Motown block, runs a cooling system as well. Racer pro heads and manifold. Trans brake PG transmission and full floater sheet metal 9". Has delay box and solenoid shifter. Turn key car runs super consistent 8.5 sec quarter mile. Enclosed trailer available separately. Can separate and sell as a roller, minus engine and transmission for $12K Or car with watertight enclosed tandem
9
Roll CageLog Book
NISSAN 300 ZX ROLLER, NO ENGINE OR TRANS FULL TUBE CHASSIS FOUR LINK REAR LIGHT WEIGHT SPINDLE MOUNT FRONT WHEELS 9 INCH DIFF WITH FULL FLOATER 40 SPLINE AXELS CENTERLINE CONVOPRO WHEELS BUILT FOR SUERSTOCK GAS CLASSES RAN 9.0 SECONDS 150 MPH IN D/GAS WEIGHT WITH 300 CUBIC INCH ENGINE WOULD SUIT TURBO CHARGED CLASSES
17
Roll CageLog Book
xbody Mustang Drag car 383 Cleveland, chi heads and intake Mechanical injection new waterman’s pump T400 box with trans brake Methanol Ice Ignition with 2 step Current andra teched cage Tube front end, front clip Coilover front and rear 4 link rear Weld rims Just had tuned at just over 500rwhp Runs consistent low 6’s 1/8 and mid 9’s 1/4 Well sorted turn key car
5
Roll CageLog Book
1980 ford xd falcon drag car New car has arrived wanting to move on asap Factory 351 manual 9 inch car Very clean car absolutely no rust paint in mint condition Would keep the car but I have another project and can’t keep two cars. 393 Cleveland has had freshen up. Two passes old. Mechanical methonal injection Fuel system has had overhaul same time as engine C4 transbraked reverse pattern auto Strange 9 inch diff (4.3) setup with ladder bar suspension and adjustable shocks Car run
32 1
Roll Cage
General: Full chrome moly tube chassis by Chris Alston in California. Glass front, steel doors and rear. New Tailgate, body stripped and repainted in custom pearl blue. Custom wing, wheelie bars, parachute. 20l alloy fuel cell, new rear mounted battery. Linelock and quick release steering wheel, 5 point harness, alloy ice box. Completely rewired throughout. Certified by both NZDRA and IHRA. All fabrication done by Raceworks in 2021. Engine: 427 LS7 built by Steve Morris in USA in 2021, approx 10
5
Roll Cage
Ford 1 Tonner drag Ute Full rollcage B&M Shifter Autometer Gauges Autometer Shift Light race seat & 5-point harness Hoosier Rear Slicks Upgraded Rear end. Upgraded Tail Shaft Comes with many additional spares. Contact Karen for more details
20
Roll Cage
Time to go unfortunately, Chevy Belair, new build not quite finished. Set up for A Gas and or 1/8th mile. Diff - new Chevy 12bolt with Lenco spool 5.44 gears and Summers Bros axles and "C" clip eliminator kit new tailshaft. Wheels are 15x14.5 Centreline Pro stacks with 32in slicks, 15x5 frontrunners. New cage, tubs etc. Torana front end and steering with SPAX adjustable front shockers. Engine - Sawka built, original 454 LS7 Big block, Crane R260 roller cam, lifters, rockers, Hilborn injection. T
4
Roll CageLog Book
1927 Ford Roaster Drag Racing Car Engine: 383 Small Block Chev Gearbox: Powerglide Rear end: Strange housing and center with pro gears Chassis: Complete CM4130 chassis For photos go to www.cacklingpipes.zenfolio.com and search number 2360 or feel free to contact me with any questions.
6
Roll CageLog Book
Ready to race dragster.Engine 400ci Small block chev,runs methanol.Engine rebuilt in 2022 .Has run 1 meeting. Transmission 2speed Powerglide transbrake and timer.Verry reliable and consistant.Last 3 runs were identical times. Runs 8.3 At sea level. A built in trailer with 4 new tyres included.
10
Roll Cage
Set up for drag racing 13b turbo engine - 640 rwhp (last dyno) Power glide gearbox (newly rebuilt) with 7500rpm stall with bump system Microtech LT10s ecu - 3 bar & 2 step Handmade 9" diff, Mark Williams alloy center 35 spline axels 4.8:1 4 link suspension and coil-overs not pictured: wheelie bars, parachute