SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

112 items for sale

Refine Search

Clear All
Keyword
Popular Vehicles
All
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

79
Registered
Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original

Kogarah NSW, Australia
Share
Watch
5
Roll Cage
Log Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Adelaide SA, Australia
Share
Watch
12
Roll Cage
Log Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Helensvale QLD, Australia
Share
Watch
227 1
Registered
When you think of iconic Japanese cars from the seventies, a number of makes and models immediately spring to mind. But if you had to nominate just one car that best represented design cues, styling and engineering from the era, it would have to be the Mazda RX-3 Coupe. When it was released here in 1972, the rotary-powered coupe was a legend-in-waiting and without question the car has well and truly achieved cult status amongst the Australian automotive community. This particular example has

Kogarah NSW, Australia
Share
Watch
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec

Caloundra West QLD, Australia
Share
Watch
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.

Padstow NSW, Australia
Share
Watch
10
Roll Cage
Log Book
Health circumstances force sale. First raced 1985. Have original log book. Needs paint, alloy, windows and you've got yourself an amazing car. Has 13b peripheral port RX7 Series 4 five speed, new Hilux diff. Koni suspension. Lots of new and used parts included to finish. Lots of spares as well. Has been undergoing restoration but I can't finish it. Would love to talk to potential candidates. Would consider breaking up everything and selling separately. $16,000 or nearest offer.

Blackstone QLD, Australia
Share
Watch
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1

Mount Crosby QLD, Australia
Share
Watch
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch
10
Roll Cage
Nissan 180sx Time Attack/Sprint/Hill Climb/Drift Car Car was serviced with new oils and filters recently in preparation for 2024 events. Car has previosly done the following lap times Queensland Raceway: National 1:19.44 Switchback 1:12.29 Sprint 56.20 Clubman 58.93 Sportsman 56.61 Lakeside: 58.5 Morgan Park: E layout 1:07.93 K Layout 1:23.5 Noosa Hill climb 61.84 Very fast car for the money and performs well. Would have to spend 3-4 times the price to go as quick with a modern car and up

Eastern Heights QLD, Australia
Share
Watch
9 1
Roll Cage
Log Book
Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Lots more pics here https://www.dropbox.com/scl/fo/in3bfqwjsf82gsbn3cn1b/h?rlkey=ti3snaesjilgakocndpv7q2j7&st=i3k76t7r&dl=0 Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe

Launceston TAS, Australia
Share
Watch
3
Roll Cage
Log Book
1984 Nissan Bluebird 910 for sale. Located in Adelaide. Car is built as Club rally Car - needs finishing off. Approved roll cage and MA Log Book (PRC). L20B 2 litre motor with 2x Webers, 76 degree cam, alloy radiator. Rear end R30. Complete car $10-15 K depending on what comes with it, or car without engine and gearbox $ 5K.

Hindmarsh SA, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch
10
Registered
R33 GTR 1996 (non Vspec) series 2 - midnight purple - 107,000 Kms (includes some shaken papers grade 4 import certificate) - No rust - Clean straight rails - Car just recently resprayed - Alcon big brake kit - Excedy twin plate clutch-nismo braided slave line kit) - Tein coil-overs - Factory optioned 320km cluster (car sold through Prince Tokyo (Yokohama) - Power FC D-Jetro - Turbo smart e boost-2 - Nismo LSD - Tomei 3” turbo dumps - HKS 3” front pipe - Trust PE Full titanium exhaust 3” -

Osborne Park WA, Australia
Share
Watch
10 1
Roll Cage
For Sale - Price reduced and is negotiable - Production Sports Car MX5 NB8A track day special. This naturally aspirated 1.8L DOHC engine has never let me down. This car was built by Automotive Plus, and due to its unique sound down the straight has been a head turner at SE Qld race tracks An extensive list of items are below: BC BR Coil overs - adjustable dampers, adjustable ride height BBS RG359 RG-F Wheels, 15x7 wrapped in Hancook Ventus C51, medium compound twin groove slicks. 205/50Z

Caboolture South QLD, Australia
Share
Watch
1
Roll Cage
Log Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.

Wheeo NSW, Australia
Share
Watch
9
Registered
Roll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo

Sydney NSW, Australia
Share
Watch
5
Roll Cage
Log Book
V8 SuperUte for sale. Cars in great condition, few new things over the season break. - rebuilt engine by wall speed. Brand new heads, locked and sealed within series restriction - new diff centre - Brand new clutch - New axles Cars all fresh and ready for the season ahead. Only selling due to financial reasons. Will come with a list of spares such as new radiator, up rights etc. More then happy to get you into contact with the team at SuperUtes to sort you out in getting started. Pl

Narangba QLD, Australia
Share
Watch
7
Roll Cage
Log Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car

Glenwood NSW, Australia
Share
Watch
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Braeside VIC 3195, Australia
Share
Watch