62 items for sale

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Ford BA race ute (used in the Queensland production Ute series) Has come either 2nd or 3rd in championship in each year it’s competed - [ ] BF 6 cylinder gas motor , billet oil gears and tune (1-2 seasons old) - [ ] 6 speed gear box with rip shifter (4 races old) - [ ] Custom single piece tail shaft (4 races old) - [ ] Locked diff - [ ] Qld production ute series brake package - [ ] Quick release steering wheel - [ ] Scott’s rods cage (national spec not just local requirements) - [ ] Push butt

This 500HP Midnight Purple 3 R34 is not a car you can just go out and buy in this condition. I recently won this car through a raffle with Vincere Australia, who bought the car off of a woman who did the majority of the modifications. The paintwork, the body kit, the extensive modifications to reach 500HP reliably AND legally, really proves that this car was loved and cared for before I owned it. I have a tracked down a full history of the car in Australia; when it was imported, who owned it,

N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

Aussie Race Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purposes built tilt trailer with winch. Sydney NSW Log book $18K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185

Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Log booked 3E Production Race Car and 2018 model Phoenix Tilt car trailer, including all spares as listed below Engine rebuilt in 2023 CP Bullet Forged Pistons and H beam Conrods ACL Race B/E ACL Race Main 360 deg 12mm APR 2000 head studs APR Main studs Barra Oil Pump backing plate Billet Oil Pump Gears Kelford Cams KV218A Kelford Valve Springs KVS4 Factory Rockers and Rollers New water pump All new pulleys All receipts for engine build will be provided. I have had the pleasure of ownin

2005 ba falcon xr8 Car has following: Motorsport Australia logbook 3j improved production -fresh 5.4ltr engine with only dyno time -T56 6 speed gearbox with new ceramic clutch and lighten flywheel -4 into 1 pacemaker headers with 4 inch side exit exhaust -brembo 4 pot front brakes with pbr rear -HSD coilovers allround -Adjustable sway bars front and rear New Nolathane bushes in rear cradle with adjustable control arms -Front camber kit -2 sets of Koya SF05 wheels 18X9 front 18X10 rear with slic

Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

2019 Trans-am TA2 Howe Mustang driven by Elliott Cleary in the 2023 National Trans-Am Series. Multiple race Podiums and a front row start in drivers first season circuit racing. Prepped, Run and Maintained by The Racing Academy throughout the 2023 season. Car will come fully race prepped ready to pick up and take to the track, can offer a seat fit and track handover at SMP to the buyer if desired. Engine replaced Mid 2023 season with a new McLaren build engine Gearbox rebuilt and well maintai

1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar