15 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
10
Roll Cage
Imported into Australia in July 2008, this car was purchased by the current owner in October 2008. Originally registered as a road car in Queensland (registration number “A911”), this car has undergone some work to convert it into a track car. Parts acquired and installed include a fuel cell from Australian Fuel Cells (2016), a Momo steering wheel (2018), RSR door handles (2018), a Walker chassis roll cage (2017), and new tail-light housings (2020). Some bodywork has been undertaken by RSR Spo
17 1
Roll Cage
PORSCHE 997.1 GT3 CUP CAR FACTORY RACE CAR RACE READY NOTHING TO DO BUT TAKE IT TO THE TRACK RECENTLY TRACK TESTED AND MECHANICALLY INSPECTED BY DEAN CANTO AT EDGE MOTOR SPORT WITH DEANS ON BOARD FOOTAGE AVAILABLE COMES WITH 2 SETS OF WHEELS AND TYRES / WETS AND DRYS EXTENSIVELY SERVICED AND WELL MAINTAINED VEHICLE GREAT OPPORTUNITY TO GET INTO THE SPORT 20,000KMS BRAKE UP GRADE (ABS) Attached link to on board footage https://www.dropbox.com/sh/hap882akp2nskhc/AABdmSfG6y7C_EsqXnNiUFb
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in
13
Registered
2018 Subaru BRZ TS 45,XXX KMS Ideal Street and Track Car, built with supreme reliabilty and performance! Engine Modifcations: -Invidia N1 Cat Back Exhaust -Tomei Equal Length Headers with Over Pipe -Zeitronix Flex Fuel -Cosworth Inlet Hose -Perrin CAI -EcuTek Race-Rom Tuned By S&J Automotive Suspension & Brakes: -Upgraded STI Brembo Brakes to Spec R STI 6 Pot Front Calipers with Endless PC35 Pads/DBA T3 Discs -MCA Street Series Coilovers -Whiteline Rear Sway Bar -Whiteline Gearbox Mount B
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
12
Roll CageLog Book
RHD 2011 997.2 GT3 cup car built into tarmac rally car, Right hand drive converted with all genuine Porsche items, low hour modified 3.8 with 340KW at the wheels, modified cams and springs, RSR style headers, low hours on Holinger sequential, new extreme twin plate clutch built for tarmac rally use, ITB conversion, motec M600, new Velo Apex FIA seats, new Velo harnesses, Hydraulic handbrake, big modified steering lock, CSF radiator upgrades with cooling fans, fresh brakes, EXE-TC dampers built
5
Registered
V8 Mazda Maxi Campervan S.A registered Holden 308 Possibly one of a kind Street registered with a Holden 308 turbo pattern engine. T400 three speed automatic transmission fully rebuilt with small stall Holley 600 fully rebuilt Custom exhaust Commodore rear end with welded diff Trans cooler and second radiator on bull bar Disk brakes all round The body is in fair condition and has been patched up and sprayed with a spray can Deck it out for a great Campervan Tow car for go carts Or remov
10
RegisteredRoll Cage
MY03 STI Tarmac Hill Climb / Circuit Sprint Car Built to be reliable and fast • Aust Delivered MY03 STI • 207,000kms • Handbook Serviced and Upgraded at S&J Automotive o MRT S/S Turbo Back Exhaust o MRT 500HP Fuel Pump o S&J VVT Upgrade o EcuTeK Type 3 Custom Dyno Tuned with 210kw ATW o Rota 18 x 8.5” Wheels o Federal R-Specs 235/40 R18 o Half Cage o Harnesses o new Extreme competition clutch o Cusco Brake Support Bracket o Perrin Wing Stabilisers o Coil over suspension A very c
28
Roll Cage
2002 Nissan Skyline R34 GTR MSPEC tuned by Full Stage Japan HKS STEGE III 2.8L STROKER KIT GT2530 x 2 EVC F-COM NEW GEAR BOX (GETRAG) CARBON TRIPLE PLATES CLUTCH IKEYA FORMULA LOWER ARM INJECTORS FUEL DELIVERY FUEL COLLECTOR TANK ARC RADIATOR FRONT INTER COOLER TRUST MUFFLER CARBON DOORS CARBON BONNET CARBON LID DRY CARBON REAR WING ENDRESS BRAKE CALIPER (MONO BLOCK) NISMO METER BOOST 1.2 550 ~ 580 PS BOOST 1.7 600 ~ 630 PS Only ran 300kms after the engine build Car is still in Japan $180,0
12
Roll Cage
Nissan S13 Silvia with S15 front RB26DETT fresh -7’s Forged internals Nitto oil pump & collar Remote oil cooler & filter Custom catch can & overflow HKS cams (264 9.1) HKS injectors, Bosch fuel pump Custom front pipe & side pipe Motor originally built by Top Fuel Japan, has had rings and bearings done since, linished & straightened crank, new rods & pistons. Nitto head gasket Rb25 gearbox with 26 internals (better synchromesh etc) 200mm xtreme twin plate clutch Nissan 4 pot front brakes DBA roto
10
RegisteredRoll Cage
Delivered new in Adelaide and finished in Stone Grey. Currently road registered in South Australia (Historic registration) Powered by a 3.0 Litre 4 cylinder engine, when new it produced 155Kw and 280Nm of power and torque, delivered to the rear wheels via a 5 speed manual gearbox. The car also comes with but not fitted: Rear wiper assembly Terratrip intercom Terratrip distance meter Radio /cassette player The car has a half cage plus race seats which are ADR compliant for str
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
7
Registered
race ready no expense spared r35 cams approved cage terra trip rally safe Stilo full KW canister shocks fully adjustable just been rebuilt worth $$$$$ full just jap gear box with gear set 11 plate clutches billet baskets Dodson at a cost of $25000 exchange about 2 events old billet front Dif housing hard race adjustable rear arms hard race front top arms rose jointed adjustable rear adjustable front adjustable sway bars and bushing winged seats fire bomb plumbed in engine and feet akropovi
9
Roll CageLog Book
Mazda in excellent condition, recent service, garaged, Mazda BP GTR Motor with factory Ihi ball bearing Turbo, 221 KW @ rear wheels s/5 gearbox, new h/d tailshaft triple plate tilton, alloy flywheel 4.11 detroit locker.S/4 breaks all round ht 10 pads new front koni struts, harness, autometer gauges intercooler spray 48’s. CAMS log book. ID plates and could be registered if changed to roadworthy.