129 items for sale

***Pending*** 400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebui

1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough

Project car regrettably up for sale 4AGE-ZE motor with LA3 mod plate Cast iron Celica 5-speed gearbox Shortened Hilux diff 15” Simmons wheels Front mounted intercooler behind bar Very clean underneath, no rust in chassis Interior mostly complete, missing a couple of mouldings in boot area Exterior in good condition, a couple of small rust spots, nothing major Motor not currently running Will require ECU and partial rewire Selling due to not having enough time - have had the car for 8 years

FOR SALE NISSAN PULSAR SSS N15 SPEC APRA ️Ready to race ️Log booked ️AGI State Roll Cage ️6 Point enduro harness ️Fresh 7 inch lightweight race alloys ️Fresh blueprint SR20 engine ️Fresh locked gearbox ️Whiteline swaybar ️Side exhaust ️Yellowspeed spec coilovers ️Electric steering/water pump ️Passenger seat/ seat belt

PRICE REDUCED! Car was a repairable writeoff, repair has been made and the car has been professionally modified to be a suitable track car. List of parts and work completed: GPT 3 FIA seat ( Hans compatible ) Steel Seat mounts FIA 6pt Velo Harness Kill switch Kill Switch Pull Cable Bonnet Pins Fire Extinguisher Roll Cage Padding x 3 lengths Window Net Window Net fitting kit Seat Slide Rail assembly Oil Cooler Harness Plates x 3 of Steering Wheel 350mm R28 Fixed Tow loop x 2 Boss Kit to suit to

Nissan R33 V spec GTR Was built from a STD Car Ground up , It has been built and revised over the years for WTAC but could be easily raced in Sports sedans with minimal mods Only the Best of the best parts have been used Engine Bullet Billet 3L Block Built by MOSTECH in qld and only done one WTAC 2022 since build 3.2 Stroker Supertech Dual Springs with Titanium Retainers OS Giken Cam Gears Avaid Dry sump pump with ross Billet 2WD Pan Peterson 3 Gallon Oil Tank Cam and crank Trigger

Extremely quick Toyota 86 that has run in 1 Hour endurance racing in NZ. For reference of lap time approx 1 second per lap slower than Marc2 Mustang and Porsche 992 cup from running last season relative to an approx 1.30 laptime. Motorsport NZ homologated cage can be recognised per Motorsport Australia Schedule J part 4.2. Sandblasted shell with comprehensive roll cage, car finished with PPG Matte black Paint. 7 Litre LS Engine – Dry sleeved block, CNC Heads, Dailey dry sump etc. Tilton drive

***price drop*** 3 litred 1996 R33 GTS-t s2 I have owned the car for 15 years in which time it's sadly seen minimal use. Made approx 350rwkw last week on run in tune at only 13psi on pump fuel. Fresh engine, ground up forged 3 litre build. Less than 1,000km. Ready for e85 and boost. Z32 5 speed. All custom arms and mondified subframe. Original interior for the vehicle re installed with no peices missing except a leather gear boot. Car will have full detail and stickers removed for handove

1992 S13 Nissan Silvia. SR20 DET Log Booked Race Car 8 Point Tower to Tower roll cage. Comfortably fits 6’4” driver MCA coil overs with remote reservoirs SR20 built and tuned by JPC 260kw at the wheels Garret Turbo Intercooler sprayer Motec Computer with standalone engine loom Motec Dash S14 5 speed built by Neat Gearboxes 2 way Diff Strengthened S14 rear subframe Fully adjustable rear suspension with alloy knuckles S14 front X member and strengthened LCAs Alloy fuel tank Surge tank Braid raci

This was originally a v8 limited Soarer, so it has all the electrical comfort features. It has been resprayed the original black and had paint correction so the finish is like glass. It has a KBD polyurethane kit, with a Sebon Carbon bonnet and Origan carbon roof lip. Rolling on work XT7R 19x9.5 and 19x11 with Kumho PS71 front tyres and Valino Pergea 08RS Rears. It has Willwood brakes 6 piston front and 4 piston rear (stops on a dime), with Shockwoks coilovers all round. Rear-end has all adjusta