SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

40 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

All Results

6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L

Point Cook VIC, Australia
Share
Watch
8
Roll Cage
Log Book
S3 RX7 Rally car, fresh rebuild with only two events since completion. (2022 Alpine, 2023 Southern Cassic) 13B Bridge port with 48IDA, approx 250hp ATWs, stainless extractors, remote oil filter, new PWR oil coiler with new oil lines RX8 close ratio gearbox S3 4.89 LSD with strengthened housing MCA with remote canisters, two events old S4 steering, struts and 4 pot calipers All new wiring loom Twin carter fuel pumps Braided fuel and brakes through out Pedal box with Willwood cylinders Hydraulic h

Bittern VIC, Australia
Share
Watch
7
Roll Cage
Log Book
IPRAVIC number 58 logged booked race car fitted with g13g Ivan Tighe 1044 cams efi hardware throttle bodies haltech elite 550 honda d16 pistons modified close ratio gearbox with locked diff 6x14 wheels and spare set with Yokokhama A050 tyres 2 15x6.5 with tyres some spare panels could covert to 2lt sports sedan ,race weight with 75 kg driver 760 kgs 108 hp at wheels race fuels 102

Morwell VIC, Australia
Share
Watch
10
Log booked 3E production car. 2006 Suzuki Swift Sport 3E production car with log book. Great basis for further development or race as it is. - National spec 6 point weld in roll cage (MA approved). - adjustable coil over shocks / springs. - 2 1/4 inch exhaust system, headers and AES race muffler. - Custom air intake with pod filter. - Slotted front disc brakes and custom brake ducts. - sparco race seat with 4 point harness. - limited slip differential. - Battery relocated from engine bay to pa

Wollongong NSW, Australia
Share
Watch
10 1
Roll Cage
Log Book
SUZUKI Cappuccino 1993 fitted with full house Swift GTI 1300cc motor, Sierra / Jimny hybrid 5 speed trans, Subaru R160 diff with Kaaz mech LSD Currently set up as a track car. Not roadworthy and cannot be registered without full engineering certificate. Has Grey import compliance plate. Some video in action https://www.youtube.com/watch?v=nml_GdRnq_g https://www.youtube.com/watch?v=qhkl-r2dSXI Price is negotiable Contact Jeremy for further detail

Upwey VIC, Australia
Share
Watch
16
Registered
Hi, for sale is my EK1 Civic with EK4 facelift. I don't particularly want to sell it, but having 3 projects cars and renovations on the go at the same time something has to give. Pros: - Overall it's a great little car and has been modified to be either a fun street car or to be competitive on the track. - Has all the fruit you could want. Everything is done, just get in and drive. - Qualifies for Vic historic registration next year. - Engine is registered to the chassis. Cons: - It's a 25 ye

Flemington VIC, Australia
Share
Watch
79
Registered
Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original

Kogarah NSW, Australia
Share
Watch
227 1
Registered
When you think of iconic Japanese cars from the seventies, a number of makes and models immediately spring to mind. But if you had to nominate just one car that best represented design cues, styling and engineering from the era, it would have to be the Mazda RX-3 Coupe. When it was released here in 1972, the rotary-powered coupe was a legend-in-waiting and without question the car has well and truly achieved cult status amongst the Australian automotive community. This particular example has

Kogarah NSW, Australia
Share
Watch
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.

Padstow NSW, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to

Kanwal NSW, Australia
Share
Watch
1
Roll Cage
Log Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.

Wheeo NSW, Australia
Share
Watch
9
Registered
Roll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo

Sydney NSW, Australia
Share
Watch
7
Roll Cage
Log Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car

Glenwood NSW, Australia
Share
Watch
9
Registered
DC5s Milano RED I have had the car for 1 year and have only put on less than 2,000km since buying it due to having too many cars and not getting driven enough! Was bought originally to track but plans have changed. A selection of modifications have been done to enhance the car's performance whilst making it reliable. Has passed RWC when I bought the car, only required a new front windscreen which was replaced at time of the RWC Pro All electrics are in working order inc AC, lights, radio, c

Doncaster VIC, Australia
Share
Watch
8
Roll Cage
Log Book
Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged

Sydney NSW, Australia
Share
Watch
9
Was $15,500$14,500
Roll Cage
Log Book
Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts

Oatley NSW, Australia
Share
Watch
8
Roll Cage
Log Book
Sports sedan RX7 log booked 3D 3rd nsw sports sedans 2022 division 3 2023 nsw sports sedans division 2 category winning car. Car is compliant in multiple categories, including but not limited to. SUPER TT.. SPORTS SEDANS.. SUPERSPRINT SERIES.. TIME ATTACK.. HILLCLIMB.. DRIFTING.. LS 6.0L dry sumped engine built by troy at WARSPEED making close to 700 engine HP Dedicated E85 set up with custom internal surge fuel cell Tremec TR6060 gearbox modified VY trutrac modified diff centre solid m

Weston NSW, Australia
Share
Watch
7
Registered
Log Book
Luxury model with leather and sun roof, 3rd owner, new tyres, 164000km, always serviced, some damage back drivers side panel.

Oatley NSW, Australia
Share
Watch
23
Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.

Werrington County NSW, Australia
Share
Watch