26 items for sale
Most Recent
Most Recent
Keyword
Price
All Results
15
Registered
Lovely example with some tasteful improvements maybe only RHD 1998 pace car in Australia has travelled just under 100K and all in pristine condition TELEPHONE TREVOR JOWETT ON 0412338332
42
Roll Cage
Overview: • This Chevrolet Camaro has been with its current owner for almost a decade after acquiring it from Tennessee and shipping the car to Australia • Under its previous ownership in the USA, the car ran in the Sports Car Club of America GT1 and GT2 classes • It sports a new AR Bodies muscle car shell on a Panoz chassis that was assembled by Penske Racing to an incredibly high standard • Under the bonnet sits a Chevrolet LS1 engine putting down 400hp to the rear wheels • The Camaro has bee
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
15
Low 26855ks NEW Clutch Ring gear Fuel pump Disc pads Roll cage ( needs some modification to fit ) Discs machined, bearings inspected and repacked Rear brakes inspected and freshened Carburetors rebuilt by Claud ( $800 ) Previous owner replaced fuel lines with braided. Previous owner had it on club registration Good tyres FULL DISCLOSURE Holes in front of screen for wipers ect covered by tape, see photo A couple of times the clutch “dragged “ I suspect the mechanic didn’t grease the spli
6
Roll CageLog Book
1980 TIGA SC80 S2000 Sports Racing Car. Chassis: Aluminum Monocoque with tube Bulkheads and engine bay Engine: Ford Pinto 2,0L SOHC Gearbox: Hewland Mk9 (dog box) 4 Speed Transaxial gearbox. Has a Motorsport Australia Logbook and C of D. This car originally campaigned in North American SCCA Oregon Northwest Region and British Columbia, Canada. In 2013 the car was completely re-built and re-tubed by Marc Bahner Engineering in USA, fitted with a new light weight fiberglass bodywork. A number
9
Registered
3L Convertable. Shadow black accents, GT2 Napa leather Seats, Ceramic paint protection, 1000 km.
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
9
Registered
APRIL 20th- UPDATE PLEASE NOTE THAT THE CAR IS NOW SOLD. TRAILER IS STILL AVAILABLE. More trailer specific photos and internal/external dimensions to follow. Overview- 2012 Caterham Lotus 7 Superlight with Race Chassis, 2.0l Ford Duratec engine and Quaife 6 speed Race/Dog gearbox. All up weight under 500kgs, dyno reading 134kW/176Nm on Minilight wheels with Hosier slick tyres. ***** Trailer- Is a single axel box trailer built in 2010 which has also been meticulously maintained by the current o
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
4
Roll CageLog Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin
7 1
Roll CageLog Book
*****Price reduction***** 1988 Van Diemen It is the Michael Mortimer Australian delivered car. He won Sandown in it beating Larkham. https://www.youtube.com/watch?v=b27CXCJlVc0 and spun on the last lap at Bathurst whilst in third: https://www.youtube.com/watch?v=sA8_gcQZphg The car has only had 6 owners , including myself, in its life. Includes CoD, has just been re-powder coated, with new ali floor ready to fit, cermaic exhaust, performance alloy wheels. Needs assembly, complete except r
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
12
Roll CageLog Book
1988 VAN DIEMEN FORMULA FORD $48,000 This car chassis number 1249 was the yellow prototype for the 1988 Van Diemen with Allan McNish involved in the development. It was then a works car for Van Diemen in 1988 with the Duckham’s oil yellow and blue livery. The car was raced by Derek Higgins and won the 1988 ESSO FF1600 and British RAC FF600 Championships. It was third in the 1988 Formula Ford Festival, number 47. In 1990 and again in 1991 driven by John Thompson it won the Western Canadia
18
RegisteredRoll CageLog Book
38 Chevy 350 power, steering air conditioning airbag suspension in excellent condition will not be disappointed
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
9
Caterham Super Seven, long cockpit version fitted with Ford Zetec engine. Many features including De Dion rear suspension, accusump, side intrusion protection, Wilwood disc brakes and revolution wheels.
6
Roll CageLog Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car
10 1
This is a Great project car in excellent shape with a lot of spares, here is a list of parts and more pics on request. Here is a youtube link to a walk around video https://youtu.be/c_a-r3iK0fA Body in good shape all original steel doors and front fenders, smooth firewall and custom a/c bulkhead mounted. Have the front and rear bumpers all the side glass all the hardware etc. Chassis is completely finished powered coated,