63 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
10
Registered
2001 gen7 zzt231 celica 6 speed, Trd , rotrex supercharger,front mount intercooler etc. Has engineering cert in tasmania. Looking for a new project ?( i have another project taking my time and energy for now)This car has a blown motor after throwing a rod.Needs new block, 1 x mahl piston and rod,machining.The head/valves and crank seem ok.The motor/ supercharger had 50k on it after complete rebuild.(motor was over revved )after clutch problem. As far as power it was running 275kw atw @ 7psi o
4
Roll CageLog Book
I am selling my collector’s item 1975 Toyota Corolla log booked for Improved Production since 1993. Running a 4 A-GE 1600 small port with forged medium weight rods, hi comp with MAHLE pistons and forged rods, Arp holding it together. The head- cams are TRD formula Atlantic .320 degrees Adjustable gears with shim under bucket valve actuation. Custom quad throttle bodies. Radiator is new. All suspension bushing is new, Oil cooler is new, the sump is winged and gated, Haltech 2500 with pro logic
14
Registered
Up for sale is this 2001 Nissan Skyline R34 GTT Coupe Manual in QT1 Pearl White, 144000 kms. This car has a lot of good modifications that would have it as an excellent circuit/track car - I have had it as a street car for the last couple of years and am finding more and more that I do not have the time to drive it nor the time to do the work to it that I would like. Option 1, take it as is at $58,000 and enjoy one hell of a street car - or option 2 have this R34 Skyline converted into a cage
5
Roll CageLog Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
5
Roll CageLog Book
1984 Toyota AE86 Sprinter, Motorsport Australia Logbook. 4AG 1600 twin cam with 4-2-1 extractors. T50 5 spd manual transmission. New Exedy OEM clutch. Timing belt, tensioner, water pump, crank and cam seals replaced June 2019. Cusco strut brace. Aero bonnet latches, Front Tow hook, Rhino Alarm & Immobilser 6 point Motorsport Austrlia approved roll cage. Cobra Monaco Pro driving seat on RPM seat side mounts. Ecliptech SHIFT-i shift lights. Mains battery power shutoff switch. 4.3 LSD.
9
RegisteredRoll Cage
Toyota MR2 SW20 built for track days and road use. Car is in great condition. Engine 5SGTE 2.2l stroker crank Aeroflow turbo Custom exhaust Custom air cleaner and intercooler Haltech engine management Runs E85 and flex tuned 380Hp at wheels( its fast...) Gearbox, 5 speed with locked diff. Custom alloy radiator/thermos fans Custom engine compartment extractor fans Power steering, power windows no aircon. Race seats and harness plus standard seat belts fitted. Roll cage Mod plated for qld. Afte
15 1
RegisteredRoll Cage
Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford
26
RegisteredRoll Cage
Looking to move on my 1993 Nissan Silvia S13 rolling shell. This car has had around $8,000 worth of suspension and chassis work done in the last year. The car has been driven one time since I reconditioned the full rear end, and everything in the front is brand new and hasn't seen the road yet. Every single bush, ball joint and arm is brand new front to back, the car has clean tags however the rear guards have been cut for over fenders. The engine bay was freshly painted a few years ago and loo
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec
8
Roll Cage
Genuine Michael Waltrip Racing Toyota Camry chassis driven by Marcos Ambrose in 2010, including the infamous Sonoma race where he couldn’t re-start the car while saving fuel in the lead. Sold as-is (chassis on castors), and comes with genuine NASCAR wheels with brand new tyres, diff housing and seat.
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in
10
Roll Cage
Nissan 180sx Time Attack/Sprint/Hill Climb/Drift Car Car was serviced with new oils and filters recently in preparation for 2024 events. Car has previosly done the following lap times Queensland Raceway: National 1:19.44 Switchback 1:12.29 Sprint 56.20 Clubman 58.93 Sportsman 56.61 Lakeside: 58.5 Morgan Park: E layout 1:07.93 K Layout 1:23.5 Noosa Hill climb 61.84 Very fast car for the money and performs well. Would have to spend 3-4 times the price to go as quick with a modern car and up
8
RegisteredLog Book
Has been a fun weekend car always garaged. I am the Second owner since new. Has been well kept both in terms of servicing and exterior. Log book servicing, but oil changed more frequently post turbo upgrade at home every 5000kms. Has the following: SME Turbo Kit 3inch turbo back Turbo smart blow off valve Front mount intercooler Stainless Xforce exhaust with custom turbo downpipe Straight E85 tune by Coyote - 185KW on 98 - 215KW on E85 Plex PBC pro boost controller Mod plate for tur
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar
14
Roll CageLog Book
Toyota KP Starlet Race Car. - Motorsport NZ Logbook. - Adjustable electric power steering - Adjustable Rose joint front end with adjustable Schroder sway bar - Rose joints, equal length rear end and rose joint Panhard rod - Custom valve adjustable Ohlin inverted front shocks and Ohlin coil over in the rear. - Adjustable rear sway bar Brakes: - Front 256mm AP 4 calipers forest rotors from Mk2 Ford escort. - Wilwood 4 pot rear calipers and R31 skyline rear rotors
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing