SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

44 items between $10,000 & $20,000 for sale

Refine Search

Clear All
Keyword
Price
$10,000
$20,000
Listing Type

Featured ads

All Results

9
Roll Cage
Rolling , Caged Evo 8 Shell MA certified fully welded Roll Cage , thru to front towers . Serial 73367 ( 2023 ) All Cross Members , Suspension , Arms , Steering Rack , Column & Wheel , Fuel Tank , etc Wiring Loom Rear Brembo Brakes Sump Guard Mount Fabricated Gearbox under member Carbon Fibre Door Cards , Foot Plates Ralliart rear Stone Shields Carbon Fibre Air Box Spare Rear Hubs Spare rear Suspension Arms

Bayswater VIC, Australia
Share
Watch
6
Roll Cage
Holden Monaro CV8 Rolling Shell Car has been caged for many years and after talking to officials doesn't need much to be compliant with current times. Bought it with the vision to build but unfortunately this has come to plans.

Wangaratta VIC, Australia
Share
Watch
9
Registered
DC5s Milano RED I have had the car for 1 year and have only put on less than 2,000km since buying it due to having too many cars and not getting driven enough! Was bought originally to track but plans have changed. A selection of modifications have been done to enhance the car's performance whilst making it reliable. Has passed RWC when I bought the car, only required a new front windscreen which was replaced at time of the RWC Pro All electrics are in working order inc AC, lights, radio, c

Doncaster VIC, Australia
Share
Watch
10
Roll Cage
Log Book
Cams log booked ford fiesta 2006 ford fiesta 1.6lt Omex 600 ECU Jenvey throttle bodies Short ratio IB5 gear box with LSD TVV Racing flywheel TVV 3 piece ceramic clutch with lighten race, pressure plate DGR coil overs Newman race cams Wossner pistons Pec rods ARP studs Cobra seat Saas steering wheel Short shifter Engine does need Attention but is still running.

Geelong VIC, Australia
Share
Watch
10
Roll Cage
Great little track/hillclimb car. Fitted with 1.8 turbo and AWD, sticks like glue. CAMS cage, surge tank and Bosch 044 pump setup in the boot. New windscreen to be fitted on sale for new owner, can assist with transport either in the state or interstate. Little use snce purchased 4 years ago. Sad to see it go, loss of job forces sale. Happy to answer any questions.

Ballarat VIC, Australia
Share
Watch
14
Log Book
This is a genuine NG Elfin with build plate EP 002 and comes with current log book and COD. It has had extensive development work and is a front running car with top HP engine, weight reduction where allowed and sorted steering and suspension. It comes with 2 sets of wheels and spares include a nose cane, brake drums, trailing arms, distributor, front shocks and assorted items. Wheel alignment bars are also included. Last outing at Phillip Island Festival of Speed qualified 3rd out of 16 cars.

Bayswater North VIC, Australia
Share
Watch
12
Roll Cage
bmw e21 2 door coupe 3/4 chassis chrome moly 12 point role cage commodore twin piston brakes 9" nodule iron strange 4:11.1 gears 35spline axels autometer gauges mc Donald bros ladder bar rear end art carr gated shifter tailshaft to suit t400 transmission cooler under car fuel system suit twin carburetor e85 msd 6al2 Wildwood brake master braided lines wheel tubs suit 31.5 14" tires alloy front runners painted in flat black. had blown big block chev and t400 Moving and can't take it with me.

Yarra Junction VIC, Australia
Share
Watch
10
Cool as booth trailer set up for work and play. Near new condition, always stored in my factory. Comes with, 170w solar panel 100amp slim line battery 1000w inverter 240v power access 12V points every where 12V fringe with slide out draw Storage sliding lock box with keys 240V charging transformer 12V switch board Rear opening doors Side opening door Spare tyre Tie down points Foam flooring ( good for camping) Anderson point connection for lithium charging. Lots more. Have used also for camping

Frankston VIC, Australia
Share
Watch
3
Tandem race car trailer. Used for Porsche GT3 Cup Car and Porsche Turbo. Would suit most race cars. Easy 1 person load. Electric winch. Simply hook up to winch and walk car onto trailer. Fold up ramps. Tyre rack. Underfloor storage. Tows easily. Registered till May 2024.

Hillside VIC, Australia
Share
Watch
4
Chromolly K-Member 4 Link Rear Diff Housing with floating Hubs Strange Front Adjustable Struts Custom Swaybar Kit Front Hubs HOWE Ball Joints Upper Rear Control Arms Lower Rear Control Arms Brackets and attachments Can Pack and Ship

Niddrie VIC, Australia
Share
Watch
3
Selling 6 speed h pattern RD6 Holinger Comes with input shaft and stick. Always serviced. 1st 2.918 2nd 2.112 3rd 1.671 4th. 1.351 5th. 1.135 6th. 1.000

Berwick VIC, Australia
Share
Watch
10
Roll Cage
Log Book
Genuine NG Elfin Formula Vee complete with COD and Historic Log book. Has been in use over the last 12 months with the last event being Winton on 9/10 September. The car is ready to race. Some spares.

Patterson Lakes VIC, Australia
Share
Watch
10
Bathurst rare 1976 Alfetta 116 series GTAM Australian complied, 25 were imported to Australian to have them homologated to compete at Bathurst in 1976 , They had a 2 litr engine, Spica fuel injected, larger fuel tank... this particular car was sold at Foleys Sydney used as a road car sold to a lady very little use has been stored undercover for many years, car is complete in need of total restoration, trim no tears proves little use, solid but has some rust as pictures indicate, engine turns by

Bundoora VIC, Australia
Share
Watch
5
Hollinger H6S Dogbox with Modena 5 gears. Gearbox has recently (Mar 2023) been stripped, inspected, crack tested and re-built by Ivan Taylor at Tailored Motorsport Mechanical Services at a cost of over $9k. The following parts were replaced and are new H6S Sandwich plate, Dog rings, Input gear, 3rd gear and 4th gear along with 3rd and 4th gear splines. All new bearings, bushes and gaskets used. Gear ratios are as follows 1st – 2.35 (33:14) 2nd – 1.82 (31:17) 3rd – 1.52 (29:19) 4th – 1.23 (

Melbourne VIC, Australia
Share
Watch
7 1
The engine is complete with the intake and throttle bodies and Terminator X ECU and harness and it includes the holley ign module that runs the coils from the Terminator software. BBC Street or Race Engine 'NEW' up dated video !!!!!!!!!!!!!!!! Go To This Video to hear it run https://youtu.be/GmDJW1GD5hs LS 7 4bolt Block bored to 4.280 460ci GM 4.0 Stroke Steel crank LS 7 Rods with 7/16 rod bolts Dome Forged pistons 1/16,1/16,3/16 rings with heat coatings on pistons Comp Cams Hyd Rolle

Bonsall, CA, USA
Share
Watch
40
Registered
Track day - Road Rally - Fast Road Car- Your choice Saab- the iconic Swedish car maker led the world in turbo-tech... witness Stig Blomqvist's rally wins - This immaculate tribute has all you need for great fun as a tarmac or gravel rallycar, a hill-climb champion, track day hero or you could easily return to road trim and cruise the highways. Complete with historic rally documentation, live your dream in what's now a fast appreciating asset as these cars become recognised as the pioneer vehi

Glen Iris VIC, Australia
Share
Watch
10
enclosed car trailer or toy hauler , trailer is tilt trailer , will suit small sedan, toranas cortina mazda and so on , bikes altered or dragster, measurements in pics , measurement between guards is 1780 mm , back to front of bench 6100, tilt trailer so no need for ramps , trailer can come with new , 3,9 kva gen , new 2 hp comp, ride levellers towing mirrors if price is met , tare weight is 1100kg gvm is 3000kg , so can carry 1900kg if packed right , has front winch , solar panel , 12 volt li

Paynesville VIC 3880, Australia
Share
Watch
7
Roll Cage
For sale, I have been running this car in sprints, hillclimb and the odd track day. New harness and shift lights, jump in and ready to run. Yamaha fj 1200 motor. Located Bendigo Vic can drop at a local depot if you wish to arrange freight.

Kangaroo Flat VIC, Australia
Share
Watch
29
Roll Cage
Reduced from 18,500, now 16,000 1971 Plymouth Duster Roller suit a number of classes, supercharged outlaw, top sportsman, super gas and others. Seamless mild steel tube chassis, funny car driver's style cage (20” at seat base, 18” at shoulder H 38”) will fit 6’1” 181lb driver. Rowe strut disc front with rack & pinion. 4 link, new Koni coil over shocks, new springs, 9” rear end, new SPE 40 spline floater 11/16 drive studs, 5 on 5.5, Wilwood 4 spot disc brake callipers. No center. Simpson 5 poi

Bendigo VIC, Australia
Share
Watch
5
New LS2 Crate engine 6.0 Litre ( Brand new never started ) Higgins Cylinder Heads (CNC Ported, with stainless steel valves) Crow roller Cam and Crow Lifters with L7 lifter buckets Trunion upgraded kit Double row Timing chain Alloy dry sump pan (Savy) AFI dry sump balancer Stainless steel header pipes At extra cost can supply: LHS starter motor kit Dry sump pump kit including brackets

Pakenham VIC, Australia
Share
Watch