SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

125 items for sale

Refine Search

Clear All
Keyword
Category
137
67
1
59
46
35
20
48
9
5
5
4
4
3
3
2
1
1
39
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

8
2001 FD RX7 - Engine and Gearbox Package ONLY * Price Drop* 13B-RE S8 Doweled Bridgeport 2mm Seals Built by Matt Russell Race Engines 600rwhp @ 18psi on E85 Literally the whole running gear from bumper to gearbox yoke as it ran in the car MoTec M84 Loom (plus spare S8 Loom) Coil Packs V Mount Rad/IC & Piping Wastegate Dump Pipe Fuel Pumps Fuel Lines Series 8 Box HD Single Plate Clutch Professionally removed from running car for a project that is now going a different direction. Pick up ce

Tuggerawong NSW, Australia
Share
Watch
37 1
Roll Cage
Log Book
Australasia’s fastest Formula Ford. Price reduced; now $29,000 (was $39,000) Almost 300hp and weighing approximately 465kgs, this turbocharged Mygale Formula Ford has a higher power-to-weight ratio than a Pagani Huayra, Porsche 918 Spyder and even a Bugatti Veyron. And it is now ready for its new owner to enjoy out on the racetrack. Chassis 004 was originally supplied by Mygale to Joe Tandy Racing (JTR) in the UK and run by JTR in the British Formula Ford series in 2012, 2013 and 2014 with w

Auckland CBD, Auckland, New Zealand
Share
Watch
5
Used for 18 months - Pristine condition Never tightened with a rattle gun, always hand tightened. Purchased new from Porsche for $2k. Always greased with the right product. Will sell for fixed price $1050 for all 4 centrelocks and post anywhere in Australia.

Winston Hills NSW, Australia
Share
Watch
3
SJ12 Mygale kent parts LD200 9.31 SDL Motec dash All suspension corners Body work koni dampers Open to offers on all parts

Invercargill City, Southland, New Zealand
Share
Watch
3
Light use over 2 years - Manufactured in 2022. Am first owner. Flawless wheels - no cosmetic or functional damage anywhere Has only been installed by-hand Uses a centrelock mechanism Near-new porsche centrelocks are available for additional cost. sizes are 19" x 9" for front and 19" x 12" for rear sets. Colour is gloss race gold Each wheel retails for $2700 + freight. Are open to offers on price - please contact for reasonable offers https://forgeline.com/wheel/ss1r One-Piece Forged Monobloc

Winston Hills NSW, Australia
Share
Watch
5
Ford Tickford V8 Supercars race engine for sale. This is a complete assembly (as pictured) Engine has just received a full inspection and health check from engine builder, Peter Wallace. Comes with the following accessories; - Alternator - Oil pump - Pulleys, Flywheel - Airbox base only - Carbon trumpets This unit is ready to drop in, minus exhaust system. This is a professional, high-performance race engine perfect for a fast Sports Sedan or similar project to win races. We are only se

Smeaton Grange NSW, Australia
Share
Watch
2
2.57 1.99 1.66 1.35 1.14 1:1 Has been used for 1 season behind a 2.4na engine As new condition.

Swan Bay NSW 2471, Australia
Share
Watch
10
Log Book
2015 Tatuus FT50 ex-TRS car, previously run by M2 Competition in TRS up until 2019, running privately in Formula Open New Zealand since then. Original Toyota spec throughout, well maintained, NZMS log book. Original Motec Engine Management System. Original quick lifts front and rear. 2x spare sets of rims (3 sets total) At least $25k spares package (including new front wing, wiring loom, various springs,etc). Hours spent getting the setup perfect for Hankook tyres, just mould a set and go ra

Hamilton East, Hamilton, New Zealand
Share
Watch
10
For sale is a McLaren MP4-12C 650S door as pictured. Believe itto be new it has a few minor suface scuffs. Please see pictures they form part of the description as they are of the actual item you will receive. It is boxed and can be sent on your courier or a price provided to be sent at your cost.

Beacon Hill NSW, Australia
Share
Watch
6
Roll Cage
Log Book
Australian Formula 2 Carbon Fibre race car with a Motorsport Australia Historic COD, that is ready to race and not a cent to spend on it. Including new wets and Hoosier slicks (unused) This car was imported into Australia as a roller, after only 6 months racing as a F3 in England with Edenbridge Racing. It was converted to Australian Formula 2 VW golf powered and first competed in 1996. The original log book has only 4 entries between 1996 and 2002, and was then stored for 20 years. The car was

Medowie NSW, Australia
Share
Watch
3
Crower Stage 3 rally camshafts for a Ford Zetec engine (1998 0nwards). RPM range 1200 to 8000. Part number 62503-2. Will suit either the "silver top" or "black top" Zetec engines (eg. Focus ZX3).

Double Bay NSW, Australia
Share
Watch
1
have for sale 2 x Mitsubishi Evo 7-9 Heated windscreens $900 each It is fully E-Marked for Europe, 43R and AS-Marked for America and Canada and is legal on the road and track in all parts of the world.

Berrilee NSW, Australia
Share
Watch
12
Roll Cage
Log Book
1988 VAN DIEMEN FORMULA FORD $48,000 This car chassis number 1249 was the yellow prototype for the 1988 Van Diemen with Allan McNish involved in the development. It was then a works car for Van Diemen in 1988 with the Duckham’s oil yellow and blue livery. The car was raced by Derek Higgins and won the 1988 ESSO FF1600 and British RAC FF600 Championships. It was third in the 1988 Formula Ford Festival, number 47. In 1990 and again in 1991 driven by John Thompson it won the Western Canadia

Exeter NSW 2579, Australia
Share
Watch
7
5500 kg Tow system.

Merewether NSW, Australia
Share
Watch
5
Recently rebuilt 289 Windsor. Everything externally is new. Full instrumentation, fully plumbed and powered.

Clarence NSW 2790, Australia
Share
Watch
6
Log Book
The Mildren Cooper Climax Type 51, never previously offered for sale but after almost 40 years of ownership, imminent retirement from racing forces it's sale. Type 51 Cooper copy with 4 wheel disc brakes, 4 coil suspension and a two litre short stroke Mark 2 Climax FPF motor make this a very competitive package. The car has important racing history established in the early 1960s and raced at some Australian International events. A similar ex Mildren Cooper was placed fourth at the recent Goodw

Coffs Harbour NSW, Australia
Share
Watch
7
Roll Cage
Early dodge coup legend car. Has been used for hillclimb series. Not currently running body. Has a fresh 1250 xjr engine that is very healthy with new coolers and lines. Ready to race. Usually top 10 outright car at local hillclimb, currently holding class lap records at local Hill climb. Very quick and capable car Price not including seat. Currently have kirkey seat that will go in my new car. My email is listed wrong and I cannot change it. Please use, Sgntools@hotmail.com Or call/message

Maitland NSW, Australia
Share
Watch
9
Roll Cage
Log Book
March 85B Marlboro Formula 3000 - Ex Michel Ferte (Oreca Racing). Cosworth DFV - Engine rebuilt, dyno tuned & had 3 trouble free outings - approx 3hrs work in total Transmission rebuilt, drive shafts crack tested & rebuilt. Exhaust system in excellent condition, Burns lightweight race mufflers fitted to meet noise restrictions. Chassis has recieved a thorough Professional resotration. New Fuel cell fitted, new lift pump, all new fuel lines & fittings. Wiring tidied & repaired where nec. Overhaul

Arndell Park NSW, Australia
Share
Watch
3
Roll Cage
Log Book
One of the most well known and competitive cars in the F5000 competition. This car has been meticulously maintained and very reliable throughout the current owners 13 year custodianship. It is a very well sorted and reliable car so will suit an experienced driver wanting to run at the front or someone newer to the class who needs a great car to learn their craft. It has wins and podiums in many races and title in Australia, New Zealand and the USA. Recently it won the 2023 USA F5000 Championship

King Creek NSW, Australia
Share
Watch
8
All brand new professionally built 423ci Chev engine all top USA items As per pics Can be used in a street car that doesen't get used much Can run on pump 98 premium Solid roller, Jessel shaft rockers, Howards Mechanical Roller Pro Max Direct Lube lifters, Brodix 18 deg full CNC race heads with titanium retainers and pac springs Ferrea race 1.6 and 2.180 valves. Gliden Victor intake man with Quick Fuel 1050 Dominator carb. Sump to suit application Will come as seen in pics as some people

Illawong NSW, Australia
Share
Watch