SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

104 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

3
Near new C127 display with 128mb logging enabled. Still has the plastic screen protector on it, does have one small mark on the top left as seen in photos. Has basic loom and also an aluminium mount plate.

Tuggerawong NSW, Australia
Share
Watch
8
2001 FD RX7 - Engine and Gearbox Package ONLY * Price Drop* 13B-RE S8 Doweled Bridgeport 2mm Seals Built by Matt Russell Race Engines 600rwhp @ 18psi on E85 Literally the whole running gear from bumper to gearbox yoke as it ran in the car MoTec M84 Loom (plus spare S8 Loom) Coil Packs V Mount Rad/IC & Piping Wastegate Dump Pipe Fuel Pumps Fuel Lines Series 8 Box HD Single Plate Clutch Professionally removed from running car for a project that is now going a different direction. Pick up ce

Tuggerawong NSW, Australia
Share
Watch
5
Used for 18 months - Pristine condition Never tightened with a rattle gun, always hand tightened. Purchased new from Porsche for $2k. Always greased with the right product. Will sell for fixed price $1050 for all 4 centrelocks and post anywhere in Australia.

Winston Hills NSW, Australia
Share
Watch
4
7000km complete 2017 Mercedes-Benz C63 engine and brand new T56 Magnum 6 Speed Transmission. Thats 500+ horse power and comes with original wiring loom and ECU etc. Engine is from a statutory write off and presents as new. The T56 is brand new and comes with an Ultimate Street Shifter and High Performance CSC, all purchased from Mal Wood. Receipt available. See link below for Transmission spec. https://malwoodauto.com.au/tremec-t56-6-speed/

Gosford NSW, Australia
Share
Watch
3
Light use over 2 years - Manufactured in 2022. Am first owner. Flawless wheels - no cosmetic or functional damage anywhere Has only been installed by-hand Uses a centrelock mechanism Near-new porsche centrelocks are available for additional cost. sizes are 19" x 9" for front and 19" x 12" for rear sets. Colour is gloss race gold Each wheel retails for $2700 + freight. Are open to offers on price - please contact for reasonable offers https://forgeline.com/wheel/ss1r One-Piece Forged Monobloc

Winston Hills NSW, Australia
Share
Watch
5
Ford Tickford V8 Supercars race engine for sale. This is a complete assembly (as pictured) Engine has just received a full inspection and health check from engine builder, Peter Wallace. Comes with the following accessories; - Alternator - Oil pump - Pulleys, Flywheel - Airbox base only - Carbon trumpets This unit is ready to drop in, minus exhaust system. This is a professional, high-performance race engine perfect for a fast Sports Sedan or similar project to win races. We are only se

Smeaton Grange NSW, Australia
Share
Watch
2
$16,000 Holinger RD6-H gearbox for sale. In excellent used condition. Regularly serviced/checked by Race Torque Engineering. Last ran at Phillip Island November Island Magic in VN GpA #5. Moving to sequential so genuine reason for sale. Being removed from car this week. Comes with input shaft and gearstick. Price reduced to sell, sitting on the bench.

Perth WA, Australia
Share
Watch
2
2.57 1.99 1.66 1.35 1.14 1:1 Has been used for 1 season behind a 2.4na engine As new condition.

Swan Bay NSW 2471, Australia
Share
Watch
10
For sale is a McLaren MP4-12C 650S door as pictured. Believe itto be new it has a few minor suface scuffs. Please see pictures they form part of the description as they are of the actual item you will receive. It is boxed and can be sent on your courier or a price provided to be sent at your cost.

Beacon Hill NSW, Australia
Share
Watch
2
Sold
$65,000
Absolutely unique full Shelby Cobra replica kit. The new kit is built and supplied by Classic Revival in NSW and is a complete assemble yourself package (wheels not included). The heart of this package is a low km, complete 2017 Mercedes-Benz C63 engine which has been paired with a brand new Tremec T56 Magnum 6 speed transmission, that's 500+ horse power. The motor and transmission are ready for fitment to the chassis and comes with the original wiring loom etc. This will be a one if a kind when

Gosford NSW, Australia
Share
Watch
3
Crower Stage 3 rally camshafts for a Ford Zetec engine (1998 0nwards). RPM range 1200 to 8000. Part number 62503-2. Will suit either the "silver top" or "black top" Zetec engines (eg. Focus ZX3).

Double Bay NSW, Australia
Share
Watch
1
have for sale 2 x Mitsubishi Evo 7-9 Heated windscreens $900 each It is fully E-Marked for Europe, 43R and AS-Marked for America and Canada and is legal on the road and track in all parts of the world.

Berrilee NSW, Australia
Share
Watch
6
Registered
Log Book
Ex Sb logbook historic race car - Excellent condition/ low mileage/ no rust - Fast road cams and 45mm Dellorto carbies - Gearbox just overhauled by Lambda Motors with 3.9 Diff. Original 3.55 will go with the car - Lumenition electronic ignition and rev limiter - 14" Chromadora wheels with AO50R tyres. Original steel wheels can be supplied - Bumpers will be supplied with the car but not fitted This is an extremely rare car with only 226 RHD cars made. 800 in total. Would suit as a weekend crui

Mittagong NSW, Australia
Share
Watch
11
Was $16,000$11,000
1 set of front and rear 2 way adjustable dampers and springs complete to suit Porsche 2011 997 Cup Car. These were custom made by Supashock. They come with dyno sheets and instructions on use. No longer have the car they were made for so they need to go.

Wangara WA, Australia
Share
Watch
7
5500 kg Tow system.

Merewether NSW, Australia
Share
Watch
5
Recently rebuilt 289 Windsor. Everything externally is new. Full instrumentation, fully plumbed and powered.

Clarence NSW 2790, Australia
Share
Watch
30
Registered
A Historically Significant Survivor a Holden Torana GMP&A Factory built A9X Hatchback Road car specialty built for HDT mechanic and Race team driver Wayne Negus as his own Personal Family car.This is the only A9X GMP&A Hatchback to be built in this specification and color, Confirmed by Mike Prowse the Production control Supervisor at GMH in AMC mag issue 35, as this car is definitely a 1 of 1 build from GMH AND CERTAINLY THE RAREST WITH SUCH AN INTERESTING HISTORY AND PROVENANCE. Wayne spent a f

Perth WA, Australia
Share
Watch
3
Through a series of sales and swaps I've managed to get a hold of this Link FuryX ECU. Top of the line offering from Link ECU before going to the G5 Voodoo. Brand new in box, with manual, ECU is unlocked. Missing the mount and tuning cable, requires header plugs or loom to suit. Will require a complete wire in from competent sparkie. I also have a Bosch 4.9 LSU O2 and a Haltech IAT Sensor if required (+$200) Pickup in Seville Grove, Perth 6112 or can courier Aus wide. Selling to fund a H

Seville Grove WA, Australia
Share
Watch
9
Genuine Europipe, imported at a cost of $9000 AUD. Used for less than 1000km. Removed for sale of car. The best system for the 2RS! Sounds incredible with new OE install hardware.

East Perth WA, Australia
Share
Watch
10
Rare opportunity to build & own one of only 2 Murtaya's in Australia. The Murtaya was produced between 2006 and 2010 in Cornwall, England by Adrenaline Motorsport. Designed by leading Lotus/Jaguar/Aston Martin designer Dan Muir. Check out Dan Muir’s profile on LinkedIn https://www.linkedin.com/in/dan-muir-46a1371a?utm_source=share&utm_medium=member_mweb&utm_campaign=share_via&utm_content=profile). Total production run was approximately 40 cars, 2 of which were shipped to Australia. The kit i

Canning Vale WA, Australia
Share
Watch