500 items with Roll Cage for sale

Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) haltech and loom $2000 extra brakes - need plumbing and finishing off turbo - eith

Think GT3 racing and it is impossible not to think of the Audi R8 LMS GT3. One of the most successful GT3 race car of the modern era, it has amassed 83 drivers’ titles internationally and 106 championship victories – as well as eight overall victories in 12-hour races (including a record three at the Bathurst 12-Hour) and 13, 24-hour victories. It more than meets the challenges posed on all racetracks in all climatic zones and has won titles in Saudi Arabia as well as in Central Europe, Asia, A

URD-BMW C81 World Endurance Racing Group C Racing Sports Car. Make/Model URD-BMW C81. Year: 1982 Chassis: 5P 001 Constructor: Ungar Racing Development (URD) in Gradenau (Stuttgart) Germany. Designer: Ernest Ungar Chassis: Multi-tubular steel square section tubes with riveted aluminum sheets at cockpit and front box for pedal box. This is a reinforced space-frame, flat bottom Group C, Endurance Sports Car. Engine: BMW 3497cc, M88 (M1) S6 In-line Six, 490 bhp with Kugelfisher Bosch

1980 TIGA SC80 S2000 Sports Racing Car. Chassis: Aluminum Monocoque with tube Bulkheads and engine bay Engine: Ford Pinto 2,0L SOHC Gearbox: Hewland Mk9 (dog box) 4 Speed Transaxial gearbox. Has a Motorsport Australia Logbook and C of D. This car originally campaigned in North American SCCA Oregon Northwest Region and British Columbia, Canada. In 2013 the car was completely re-built and re-tubed by Marc Bahner Engineering in USA, fitted with a new light weight fiberglass bodywork. A number

1973 Brabham bt41 Formula 3 Race Car. 1600cc Novamotor Twin Cam with 45 Twin Side Draught Weber DCOE Carburettors Gearbox: 5 speed Hewland Mk9 (dog box) Transaxial gearbox. Chassis: Aluminum Monochrome with steel tube bulkhead and engine bay with rear selection Tubular Space frame. Bodywork: Fiberglass with front and rear wing aerodynamic aids Comes with CAMS C of D and Logbook. Alberto Colombo campaigned this car in the 1973 Italian F3 Championship with six wins in the 1973 Championship E

This very special Ford Escort Mk I is not only a super-competitive track car but absolutely looks the part as well. Log booked for 3J Improved Production, the Escort was built by its current owner and first hit the track in 2007. Under the bonnet is a 2.0L Yager Performance built Duratec engine mated to a brand new Quaife heavy duty six speed sequential gearbox. The Escort runs a Motec M84ECU as well as a Motel CDL dash, displaying all the necessary data to the driver. The powerplant has been

Just pick up, drive to the track and race your Subaru STI Time Attack Racecar 

 Highlights include

- MY05 STi Shell - ABW Motorsport wide body kit and doors, Plexiglass Windows, dry carbon roof
- Full weld-in roll cage - OMP Seat with head restraint
- Lifeline fire extinguisher with Novec Pressure System
 - 800HP/900NM PerFOURmance 2.5l with custom heads and fire lock head gasket and dry sump
 - Titanium custom 3.5-inch exhaust - PWR custom intercooler, radiator, and oil cooling package desi

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

Porsche 718 GT4 Clubsport Competition Race Car Never been raced No accident history 3 sets of wheels and tyres (1 set with near new wets) Air Jacks Spare brake pads Passenger seat installed 10,800kms Stilo radio pictured not included Fully maintained by Porsche Doncaster and ready to go.

Winner of 2022 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded - 3 of 4 rounds contested for 7 Class wins, 3 Round wins, 3 Outright race wins. Two wins (including one fastest lap) and 2 second placings in Round 1 of 2023 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded. Then competed in 2 rounds of 2023 Victorian Sports Sedans Championship for something different and to race at Phillip Island. Quick car that sounds great ! Motorsport Australia & AASA L

Regretful sale of my 2012 Clio RS, but not enough room in the garage for 2 x track cars! Extensively modified and improved over the last 2 years specifically for track use; could be improved further or easily converted back to (very fast) road spec. Recent work includes custom-made Brown Davis 1/2 cage (Motorsport Australia certified), 6-point Sparco harness, Sparco race seat, Black Diamond competition clutch, lightened flywheel, Quaife LSD, custom exhaust, port & polish, Cat Cams with heavy dut

IPRA 3J VS Holden Commodore. Ex Dan Russo Commodore Cup car with chrome moly roll cage, Comes with Fresh ex Gene Cook 253 engine with com cup sump, super T10 Dog box 4 speed,Romac full floater rear end, Big bearing front hubs, Bilsteins suspension with brand new Rota 18" x 9"rims and com cup brake package along with aims dash & coms radio wiring. New air Jack system fitted to car. WP: 1:06 SMSP 1:44 Car comes with extensive spares package which includes most parts to install a LS into the car.

Hello! I have an early F5000 that needs to be sold. I KNOW THE HURDLES OF IMPORTING A CAR TO AUSTRALIA AND NEW ZEALAND....HERE IS AN OPPORTUNITY TO OWN A CORRECT F5000 FROM RON GOLDLEAF, A DRIVER WHO USED TO RACE THE ORIGINAL CAN-AM SERIES. IT HAS BEEN SITTING BUT SWEAT EQUITY AND A LOW PRICE WILL GET YOU TO THE REST OF HUGELY SIGNIFICANT AUSTRLIAN NEW ZEALAND GROUP OF DRIVERS............... just lowered 5/13/24. trying to get this back on-track!! This was constructed by WRE, with a trio of d

Dallara F308-11 for sale. Car has been previously raced in Australian Formula 3 now Australian Formula open. It has been maintained to a high standard. This car is an has had multiple podiums and is extremely fast and competitive. It also comes with an extensive spares package, including 3 sets of wheels, air jacks, complete front nose box and wing, etc. We can also offer a full package with a truck which can carry 2 cars either 1 sedan and and open wheeler or 2 open wheelers, or truck separa