494 items for sale

A well-known and actively campaigned Australian Historic Formula 3 car with excellent provenance. First owned by Neil Neilson Holden and driven by Peter Roach, the car was purchased by Hugh Gartley in 1974 and then raced, maintained and developed by him for more than 46 years. I purchased the car directly from Hugh in 2021 and am only the third owner since new. The car comes with its current CAMS / Motorsport Australia logbook and Certificate of Description, along with the original green CAMS

All metric, quad cam, 3.4 litre, high tech V6. Was completely rebuilt and was last run in a mid engine sports car with single 70 mm intake plenum and was chassis dynoed at 225 hp many years ago. Very few laps done on this engine before carefully storing. Currently has been revised with custom intake manifolds, custom stainless headers, and 50 mm injected ITBs. Not yet run or dynoed.

Ppq plates , A Viper , white on black Offers invited

2025 Triumph TF250x race bike. Engine fully rebuilt at 68hrs. 70hrs all up.New clutch, water pump. All new bearings fitted. New oil pump. Factory Hi Comp Piston used. Suspension revalved and sprung to suit 70kg ‘A’ grade racer. All suspension bearings and bushes replaced. Comes with remapped programmable GET ignition to run on either 98 or race fuel. Plenty of spare parts included such as oil and air filters, factory suspension springs and valving. Spare factory plastics, fresh sticker kit. Fres

- Currently Set Up For Hillclimbing (Low Gearing & Minimial Cooling Package) - Motorsport Australia Log Book - PTR Built 1520cc Hayabusa Engine – 250hp (Approx 10 hours Use – Contact for more info on Engine) - Spare PTR 1520cc Long Motor (0 – Hours) - Motec CDL3 Dash / Logger with Oil Pressure, Oil Temp, Water Temp, Oil Temp, Fuel Presssure, GPS - 6 Spot Front Alloy Brake Calipers & 4 Spot Rear Brake Calipers - LSD Diff with Alloy Carrier - Alloy Front Hubs - AVO Single Adjustable Dampers - 3 pi

HANS 6.5m Tri Axle Enclosed Trailer – ATM 4.5T – Registered HANS 6.5m Tri Axle enclosed trailer in good working condition. Has been used to transport a VX Commodore Speedway Production Sedan and tows exceptionally well thanks to the tri axle setup. Features: HANS trailer 6.5 metre length Tri axle ATM: 4.5 tonne Tare: 1880kg Registered Wired with 240V power 2 x twin 240V power sockets Black Jack trailer jack 8 tie-down anchors in floor 2 metres between internal wheel arches Wire mesh fitted dow

Australian delivered Porsche 991.2 GT3 Cup Car. Multiple outright Race Wins and Pole Positions in the 2025 Porsche Sprint Challenge Series. Maintained by TFH RACING with no expense spared. Low hours on all running gear. Complete refresh and overhaul of many components with meticulous maintenance between rounds and testing. Chassis: 19579 km Engine: 67 hrs (since rebuild) Gearbox: 12hrs (since rebuild) Drive Shafts: 6.5hrs Clutch: 6.5 hrs This is a race ready package. Contact Josh for more in

This car was one a few Swifts built by Greg Cox at GMC Motorsport. Greg had intended to run a series similar to the Excel cup but it never got off the ground. This car is log booked as a 3E Production car with CAMS/MA Logbook. We bought this car to give the kids a start into motorsport, and it was the perfect choice. It is extremely well set up, and has never missed a beat. It is fitted with MCA gold non canister shocks all round, a clutch type LSD, slotted rotors and Winmax pads up front. It

2006 Hino GD Race Transporter - 622,626km 12,000kg GVM, 18,000kg GCM Rear Workshop/Storage area 2450x1850 Living Area has - AC, Fridge, shower, lounge that folds into a double bed, kitchen & microwave Workshop has 12v and 240v power thru generator and shore power, 2000w invertor Solar input and 240v to workshop/living area power Tailgate loader with with extended ramps Bullbar, UHF, cold AC, regularly serviced. New Tires all round New drive suspension air bags Lambswool seat covers External wat

Complete passenger setup pulled from a 991.2 Porsche Cup car. Only sat in 2-3 times on ride days — effectively unused. Included: Racetech race seat (FIA, HANS-compatible head cutouts, head wings) Schroth FIA harness — 8853-2016, valid until 2028 Schroth SR interior window net — FIA 8863-2013, valid until 2028 Seat rails / sub-frame as pictured Perfect for track car, Cup car ride seat, or club racer wanting a fresh-dated harness and net without the new price. Everything in genuinely excellent c

MCA GOLD FRONT STRUTS COMPLETE TO SUIT 2016-2025 TOYOTA HILUX 4X4 MADE AND BUILT IN AUSTRALIA BY MURRY COOTE , FULLY SERVICEABLE UNITS ONLY TWO SETS OF THESE WERE MADE

Rainbow Warrior Piece of racing History. Car 1 of 2, 808 coupes built into rx3 by Terry Lewis for IPRA in 90’s. Only surviving race car of the 2. Fresh built 13B Bridgeport using brand new housings. 1 race meeting since rebuilt. Injection Perfection throttle body Haltech Elite 1500 S5 rx7 box with Albins close ratio gear set. Mazda LSD Bond Alloy roll cage 14” globe wheels Well set up race car that is a blast to drive. Body is not perfect but presents well with minor rust in engine bay

MA approved 6 point bolt in roll cage. Fabricated by Jason White at Whitehot Motorsport. Very close fitting for maximum cabin space.

MG B Roadster finished in a deep British Racing Green with chrome accents and wire-spoke wheels. Classic British styling, long bonnet, low stance, chrome bumpers and minimalist lines give it that unmistakable 1960s–70s British sports car character. Convertible roadster black interior and classic dash instrumentation creates a very pure driving experience. Class Wire wheels.The chrome wire-spoke wheels are an iconic MG feature and add to the vintage elegance. Luggage rack The chrome rear rack is

Genuine BBS RS-GT RS902 3 piece Wheels 5/114.3 Fronts - 18x8.5 +38 with Federal 225/40R18 tyres. Tears - 18x9.5 +38 with Nankang 255/35R18 tyres. Located Windaroo 4207. On a Nissan Skyline but going a different route with project.

Renault Clio 172 | Rotrex Supercharged | 195hp ATW Track Car Yeah I know it’s different, but who wants to be the same as everyone else. Another price reduction...the value just keeps getting better! The brakes, supercharger and diff cost way more than this! A few weeks ago at Lakeside my son in his first ever drive of the car did a 60.6 sec lap, at 200 km/h through the kink. How fast could you go? Renault Clio 172 track car. Rotrex-supercharged, 195hp at the wheels, approximately 900kg, Qu

FANTASTIC CONDITION - Brand new wrap and car very tidy. - Brand new engine with zero hours. - Second engine available if interested at additional cost. - Right hand drive - Fl Style Radical steering wheel with display, multifunction buttons and Paddles - High-downforce double adjustable rear biplane wing - High-downforce rear diffuser - Le Mans style carbon composite rear view mirrors - 280mm front and rear floating disc brake upgrade - Triple adjustable Intrax Shocks upgrade - Air jack syst

2.0 millington 6spd sequential samsonas Hilux diff with watts link New shocks all round New discs and brakes Fresh built car Only done 1 Motorkhana event Haltech computer and dash, keypad Hydrolic handbrake 200hp at the wheels Ken block wrap tribute Body colour is black as in last photo

Single axle Tilta trailer 2020 build with all options including extra wide tracks, jerry can holder, stone guard, tool box (not fitted) & winch. Carries up to 1200kg & is 1.85 between guards. Excellent condition and only selling due to buying a bigger Tilta trailer.

Selling my chassis dyno. It is a dd bed that had a mainline conversion some years ago, its been a solid unit for the just over 2 years ive owned it, im only selling due to upgrading to a hub dyno. Inspections are welcome for serious buyers and can show it operating.