SSR Enabled
Australia's #1 Enthusiast & Motorsport Marketplace
Australia's #1 Enthusiast & Motorsport Marketplace

1,005 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum

Featured ads

All Results

1
Used . excellent cond

Palmers Island NSW, Australia
Share
Watch
1
Shortened Custom ford Tail shaft with top loader / C 4 yoke front .. Rear is not ford an suits winter quick change .. UNI has to be replaced . . weight 6.6 Kg . (Replacement cost $1185 ..)

Palmers Island NSW, Australia
Share
Watch
3
Bosch pioneered the development of a pressure-generating fuel pump in the 1920's, and development has continued until the modern era of high-flow turbine fuel pumps and high-pressure injection pumps. Recent innovations such as premium carbon brushes, anodized aluminium internals and asymmetric turbine impellers deliver high flow, reliability, low noise and effectively zero cavitation. The fuel pump is a critical component to the health and performance of your engine, so trust Bosch Motorsport’s

Clayton VIC, Australia
Share
Watch
2
Roll Cage
Log Book
Mazda BT50, New fully race machined 20B triple rotor, t400 auto with all new internals by Peter Wileman, new Strange Ultra diff, 42 spline axles. New Master cylinders, rotors and pads. New bushed throughout front end. A couple of small things to finish off. Approx. 600 hp on a mild tune with 6lb boost. Plenty left to increase. New tyres. Also a 1986 twin cab Isuzu transporter that the fits into (wide track-2200mm). turbo motor (approx 220hp) and 6 spd o/drive box. Good for 130kph. 3 new axles

Upper Plenty VIC, Australia
Share
Watch
79
Registered
Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original

Kogarah NSW, Australia
Share
Watch
73
Roll Cage
Log Book
2008 BF Ford V8 Supercar Built by Triple Eight Race Engineering - Craig Lowndes 2008 Season "TeamVodafone Livery" - Chassis 888-012A We are very proud to present the very last Ford built by Triple Eight Race Engineering for V8 Champion/Legend, Craig Lowndes, for the 2008 V8 Supercar season in her iconic "Vodafone" livery with the chrome highlights. This was the 13th chassis built by Triple Eight from the beginning's of John Briggs Motorsports and was numbered 888 - 012A. With various ownership

Keysborough VIC, Australia
Share
Watch
40
Registered
1964 Chevrolet Corvette C2 Sting Ray Roadster 2dr Man 4sp 327ci/300HP- Matching Numbers - Period Correct - Tuxedo Black with Red Leather We are very pleased to offer to you this great opportunity in securing this stunning 1964 Chevrolet Corvette C2 Stingray Convertible full matching numbers and period correct exterior/interior and for the first time on the market. A head turning iconic Stingray finished in Tuxedo Black with matching full Red Leather Cabin and black soft top. Her matching origi

Keysborough VIC, Australia
Share
Watch
46
Roll Cage
Log Book
2023 Ford Mustang S650 Gen 3 V8 SUPERCAR - Liam Lawson & James Courtney - SNOWY RIVER LIVERY - Highly Collectable Current V8SC Ford Performance Motorsport- Gen 3 Mustang #SC-010 V8 Supercar Tickford Racing Built 2023 V8 Supercar series/calendar. CHASSIS: #SC-010 BUILT: 2023 - RACED: 2023 FULL Repco Supercars Season DRIVERS: James Courtney, Liam Lawson (F1 Red Bull) & Declan Fraser ENGINE: 5.4-litre quad cam Coyote V8 by Ford Performance MANUFACTURER: Tickford Racing Team TR-27 NEW OWNERS: BLAN

Keysborough VIC, Australia
Share
Watch
75
Registered
1993 Jaguar XJ220 Spa Silver - "The Worlds Fastest SUPERCAR 92-93" - 1 of 69 RHD Built - ONLY 3,700mls - Last Owner 20+yrs We are extremely proud and honoured to offer you this very special opportunity in securing one of the most significant "Supercars" of our time. This stunning 1993 Jaguar XJ220 Supercar is considered to be one of the most collectable of the early Global Supercars ever to be made in the collector car market. This absolute iconic Jaguar XJ220 started life as a mid-engine, four

Keysborough VIC, Australia
Share
Watch
48
Registered
2013 Dodge Viper SRT GTS - Launch Edition - The Most Collectable Viper 1/150 Built - 1 of ONLY 1 with Exterior Carbon Fibre Package - #003 We are very proud to offer you this great opportunity in securing the ONLY 2013 Dodge Viper GTS "Launch Edition" #003 /150 coupe in Australia and the ONLY example built #003 out of the 150 LE's built by FCA to have the external carbon fibre package to include carbon fibre front and rear brake ducts as well as carbon fibre rear applique. This is the most sou

Keysborough VIC, Australia
Share
Watch
15
PE Racing is an Australian Motorsport component Manufacturer specialising in Competition-grade Pedal Assemblies for physical Motorsport use. We have supplied these Award Winning Pedal Assemblies to the Racing industry since 2013, with documented use across multiple Race Categories & Countries. Our Pedals are designed as safety-critical driver control systems, they are supported by Patented Engineering, detailed Technical Documentation, and a long history of competition use. Raise the bar with o

Oakdale NSW, Australia
Share
Watch
16
Roll Cage
Log Book
Six speed manual. Log booked. CAMS approved roll cage. Excellent condition. Eligible for Group 3E Production Cars and Group 3J Improved Production Cars. Spares tyres included. Endurance fuel tank. Rear axle is a standard 188mm crown wheel version, ratio is 3.46:1 (standard), centre is a locked diff. The rear cover has been modified for a diff cooling setup that has been removed. Front suspension has height adjustable coilovers, Whiteline sway bar with adjustable link, and camber plates. Brak

Richmond VIC, Australia
Share
Watch
10
Caseliner FIA Fuel Rig and Rotary Tyre Change Boom Fully optioned Caseliner FIA Fuel rig kit as used in all SRO events - GT3 & GT4 Insulation cover for overhead fuel tank. Scales with display for accurate weighing of fuel. Extended boom with provision for separate vent line in boom - Centre Rotary tyre change boom. 4 bottle capacity in base of rig. Extra dive bottles fitted ensuring consistent line pressure during a pitstop. Different fuel flow restrictors available Can also supply Krontec c

Chirnside Park VIC, Australia
Share
Watch
11
Competition Motorsport Pedal Slider The pedal slider system supports driver change ergonomics and repeatable longitudinal pedal positioning while maintaining pedal geometry. It is designed to improve safety and driver ergonomics. Pedal Slider Designed & Manufactured in Australia by PE Racing PE Racing is an Australian Motorsport component Manufacturer specialising in Competition-grade Pedal Assemblies for physical Motorsport use. We have supplied Award Winning Pedal Assemblies to the Racing in

Oakdale NSW, Australia
Share
Watch
8
Roll Cage
Log Book
Current Australian Pulsar Racing Association (APRA) competitor ( https://apra.club/ ) Log Booked as 3E Production Car that can compete in a handful of categories with minimal/no modification Car has never been in an accident that required bodywork, paint or a replacement panel. It's the exact same livery it started the APRA series with in 2023. It's had a few touches here and there, but that's racing! It will come with different, but brand new 15"x7" rims than the pics. APRA specific parts: Sea

Smithfield NSW, Australia
Share
Watch
7
Roll Cage
Log Book
I have too many toys and too many projects so it time to cull the herd. I've had this cars for about two years, It hadn't been used for a number of years (ex Brian Sampson). I recommissioned it with new brakes, tyres, harnes etc.. I used it in a couple of times at a local super sprint, less than 30 mins total track time, its ready to race. I have a history file, log books, COD. It also comes with a number of gear sets to cover most AU circuits. Give me call if you are interested. Cheers,

Sale VIC, Australia
Share
Watch
4
Custom Tandem Enclosed Trailer, Built 2023, Absolute top condition, Like new, Trailer body 6120 long Total length 7700, Width 2460, Full electric override, brake away brakes. Electric tailgate, Electric winch, Tare1560, GVM 3500, Nothing to spend Please call Greg 0409 999775, NO TXTS OR EMAILS, JUST CALL

Taren Point NSW, Australia
Share
Watch
14
Roll Cage
Log Book
A meticulously built car completed over a 12 year period, presented in immaculate condition. The vehicle has never competed or been raced, it has only been run on the dyno for setup and testing. Purpose-built for tarmac rally or IPRA. High-end motorsport electronics and professionally engineered components throughout. Key Features Electronics & Data • MoTeC M84 ECU • MoTeC CDL dash with data logging • MoTeC PDM30 power distribution module • MoTeC keypad control system Chassis & Safety • Motorspo

Bendigo VIC, Australia
Share
Watch
8
Body / Layout – Rear spacious kitchen, Front sleeping with single beds rear full ensuite with large shower, clever layout Tare / ATM – 2867 Length – 19’6 Berths – 3 Suitability –Luxury travel Set-up Highlights • Battery system – Deep-cycle agm batteries • Solar – Plenty of solar • Water- Fresh water tanks • Heating / Cooling – Truma gas heater plus reverse-cycle air-conditioner, four-season comfort • Kitchen – Full-size appliances, generous bench space, larger fridge upgrade from new and comf

Bega NSW, Australia
Share
Watch
62
Roll Cage
Log Book
2007 Ferrari F430 Challenge Race Car - Private Collection - Bianco - ONLY 21,000klms - ONLY 142 Challenge F430's Ever Built - Raw *** TRACK CAR ONLY CANNOT BE REGISTERED*** We are extremely pleased to offer you this very special opportunity in securing of one of the rawest best driver-focused track cars ever produced from Ferrari. This 2007 Ferrari F430 Challenge "Track/Race/Club" car developed by Ferrari Motorsport for the F430 Challenge race series around the world and is a true track-focuse

Keysborough VIC, Australia
Share
Watch