478 items for sale

Rebuild & modified 2.1 ltr Pinto Engine by Peter Larner Engines with less than 2500 kls since rebuild (cost was $23K). Dynotuned with 180HP. Also included is a 4spd manual gearbox that was fully rebuilt by Vic Diffs same time (cost was $2370) and custom made aluminium radiator. Package worth $25K Refer to photo for Engine Spec Sheet - too much to mention. Receipts available for all works done. This running gear is fitted in vehicle currently for inspection and testing purposes.

1 New Bosch MS 6.3 ECU 1 New Bosch PBX 90 Power Distribution Module Will Separate.

Set of 4 Perkins magnesium Supercar Wheels. Single wheel nut. There were very few of these made. They are completely original and unmodified.

1969 Porsche 911 E, coupe (non sunroof) 2.0L MFI in it's original factory colour of 'Irish Green'. I purchased this car as an extensively prepared front running Group S historic race car and have continued to further develop it both mechanically and cosmetically. Body: Original 1969 LWB narrow body early 911. Ex US car, LHD. Bonnet, rear decklid & lower valances all freshly repainted. Glass front windscreen, plexiglass to side & rear windows. Fibreglass front & rear bumpers (originals included

1937 ford pickup hot rod, 5 litre fuel injected holden with T700, 9 inch lsd, air bag suspension, removable hard top, billet specialties wheels, dakota digital instruments, award winner, priced to sell, Ken, 0418341703

Want to win Global Classic Rallies or Show? Most Australian car enthusiasts who grew up in the 1970’s and 1980’s would recognise Mercedes iconic coupe the 450 SLC but relatively few would realise that the model was the base for Mercedes entry into the World Rally Championship. The first iteration was the 450 Slc 5.0 with the 5.0l alloy block, alloy hood and trunk, all LHD and all retaining the 3 speed auto gearbox – 1636 built. In that guise they performed: Mercedes-Benz 450 SLC 5.0 was the

Used 'old style' Data-1 transmitter unit with the following (refer images): - > transmitter unit > charger cradle > under/outside car cradle (has slight damage but is useable) > operating and maintenance information sheets > boxed in original packaging In good working order. Battery recharged only three times since being replaced. Recently recharged to full and found to be fully operational. Price includes AUD$20.00 for postage Please note: also advertised elsewhere Local pick up can be arra

Price reduced Very high performance Slotted Brake Rotors. Suits a variety of cars, including SS/SSV & older HSV. Only very light use ~500km (see pics). Full set front and rear. 2 x DBA42029s rears: Diameter 324 Height 56.1 Thickness 22 C/Hole 67.4 2 x DBA42028s fronts: Diameter 321 Height 52.2 Thickness 30 C/Hole 67.4

Original Group C 308 engine block with main caps. Purchased as a spare part. So no engine number. 3.9 inch bore machined to 4 inch bore (not 4 inch & 7 thou)to suit cosworth pistons for original Group C engine. Enquiries phone 0405647951 & please leave a message if no answer. I will call back.

Ready to race Mk1 Group NC 1600 BDA fully built with all the good bits. I only used as a track car so has not been raced for a few years. Last owner competed in NC races. Great car nothing to do apart from std race maintenance as usual. Log Booked Can be seen in Somerville.

SOLD-IPRA 2002 V2 Monaro VIC #21-SOLD We have recently retired and are setting off on the Big Lap. It is sadly now time to let go of my IPRA V2 Monaro that I have owned since 2012 and bought as a road car. The V2 Monaro has been built up over many years and a large amount of time and effort has been put into the Monaro to bring it to where it is today. Under the guidance of Maverick Performance I have sourced the best components and motorsport engineers and fabricators. https://www.facebook.

Up for sale is our Holden HQ Monaro 2 door. It runs as a Group NC Historic touring car. Multiple wins, podiums and pole positions. Highly adjustable and has all the good bits. Those who know the car, know its fast. Strong and reliable 350 chev, coupled with a 4 speed muncie gearbox. The cost to build these cars is enormous, so get yourself a front running car without the price tag of a new build. Truck is available at an additional cost. Price on application.

Custom built hydraulic tilting car trailer. AL KO 2000kg IRS (independent rubber suspension) torsion axles equiped with electric brakes and mechanical hand brake. Compact electric/hydraulic power pack with hydraulic cylinder for tilting with push button activation. 1800kg electric winch. Alloy checker plate floor with alloy ramps that stow away under rear of trailer. Anderson plug provided for battery connection to vehicle for hydraulic and winch operation. Recessed anchor points. Work light. Fr

2005 MONARO CV8 Z MANUAL finished in stunning Phantom Mica Black over flawless Black/Yellow leather upholstery. Presenting in what can only be described as near-new condition, this 1 owner example has travelled a mere 3,954KM from new, with full supporting documentation and owners manuals. Please contact us for further information - inspections available by appointment only. We offer competitive Finance, Trade-In and Warranty options suited to your needs, be sure to ask us for more informati

"For sale: 528 big block Chev built by Jack's Brothers—Bowtie four-bolt block, Crower 4" crank, Carillo rods, JE pistons, Big Brodie alloy heads, Comp solid roller cam—Get-em billet 1300cfm blade carby set up by Trevor in the US, Eng dyno'd by the late Wayne Cartlige make close to 800 horsepower tuned on 98 fuel. have dyno figures and cam card. All the fruit. Turbo 400 trans by Nick at American Imports rev patern with brake will handle 1500hp, TCE 4000 converter, built for nitrous. Mc Donald Br

Super GT Z33 GT300 wheel, magnesium, with Rays box. As run, grit n all. Located Melb, $500 plus shipping AUD (Note, can source full set if you are after 4, please note they are used, and sold as is) Mola's 2006 season with the Fairlady Z! Long time Nissan team Mola is well known for jumping from GT300 to GT500 in 2011 and instantly winning two consecutive championships. Prior to those turn of events, Mola spent several years cutting their teeth and honing their craft in GT300 with the Fairlad

Limited use, these were spares for Team Mola Z33s, run in GT 300 and GT 500, can be used for other applications, all details in photos. Endurance brakes, used by Championship winning team.

Super GT Z33 moulded screen, rare, was used on championship winning GT300 Z33 car, does fit a standard z33 also, keep in. mind this in not glass, FIA approved.

BMW F80 M3 production race car, ready to run in production racing, Bathurst 6 hours or new Production classes in Australia. Price just reduced from $135,000 to $125,000 Completed Bathurst 6 Hour 2025, ran a 2.24 still running air conditioning and a lot of extra weight still to be removed from car, led the race towards the end of the first hour (see photo car 154), came 2nd overall in Winton 300 in 2025 and won the class, car details are below, also available a complete spares package as noted