478 items for sale

PRICE $45,000 Cafe racer, grand tourer or club competition - your choice. A lot of people would be happy to look this good at seventy! MGA Coupe built by MG Workshops (Melbourne) in the '90s. It is fitted with an 18GB (5) brg engine (1950cc) with a MSX crossflow alloy head and twin 45 DCOE Weber carburettors, gasflowed, large valves, Titan roller rockers, Carillo rods, JE forged piston, custom extractors and side exhaust, 123 distributor, 4-speed all syncro LH overdrive gearbox and Quaife 3.9

This Classic Rally Car was built by Escort guru Ian Hill from a rust and crash free shell, with all fabrication done to Homologation papers. Car is presented ready to rally, having only done just two rallies. Those being 2022 Alpine and 2024 Ada River for total 578 stage km’s from new. Engine: New Jennings BDG 2 litre alloy block with nicasil bores, Jennings head studs, 11.9:1 CP forged pistons and rings, Carrillo H-beam rods fitted with Indy car bolts. 12 bolt steel crank with narrow journals

MES2 completed in the Australian V8 Supercar Series between the years of 1998 and 2001 in 20 races including Bathurst, Sandown, Indy and the Adelaide 500 It was campaigned by Tomas Mezera and co-drivers: Terry Finnigan, Alain Menu (two time British Touring Car Champion) and Tony Ricciardello In 1999 the car was leased by Gibson Motorsport and raced by Steve Richards at the Albert Park Grand Prix in the #7 VT Wynn’s livery The car is presented today in the black & white Densitron Livery, has a

I have a bunch of Cup Car Parts for sale as follows. • 2 sets of 997.2 Forged factory 1-piece rims $4000 per set • 1 set 0f 997.2 BBS 3-piece rims $3500 • 2 sets 997.1 rims with wider rear inner section to run 997.2 tyre $2500 per set. • 1 x 997.1 LH factory Cup Door $3000• • 997 Cup Brypar – New front and rear disc rotors (no Hats) $2000 • 997.1 Rear BBS rim $700 • 997.1 BBS front and rear outer rims $300 each • 997 Cup Hollinger Gearbox $25,000 • 997 3.9L Cup Car Engine – hear in car running w

Ford Fiesta 2004/5 modle, We use this for rally car racing at Keyton and circuit racing, we run the same set up, just change the tyres. It comes with a full new set of road tyres Michelin 205/50/16. Plus 1 spare L / R rally rim and tyre. It has 2 race seats with a bolt in roll cage. Good reliable car. May need a new battery. Paint and sticker strips an old, car has been we used. Price is the price. Call Darren 0417470195

I have my VF Holden Caprice has done 92,XXX ks car is almost brand new and in immaculate inside and out side is in great condition aswell few stone chips at front other then that nothing major (can be fixed for right sale price) i have spent upwards of 95k on build so far, and have only had the car for 2000ks since finishing the build, a great solid set up as follows: PARTS: - 227 224 , 114 lsa boost bald eagle cam shaft texas speed - Pac valve springs with locks retainers and valve steam seal

Z28 Camaro Sports Sedan built to TA1 Spec. R5 Dodge Engine 6 Speed Modena Sequential Full throttle upshift AP Calipers and Rotors Cabin Adjustable F/R Anti Roll Bars Motec ADL2 Dash with Shock data, Lateral G’s, GPS track map, Brake pressures, Steering angle and engine data. Set up equipment + spares included Spares Carburettors Brake Pads and Rotors Longacre Scales + Platforms Wheel Alignment Frames Engine Gaskets Radiators Body Panels Fully dressed spare engine can be included for extra.

Forged aluminium wheels: Chev/ Holden CCW forged/ machined monoblock 18” road/race wheels, extremely strong and light; Chev / Holden 5 stud x120.65mm/ 4.75 inch : two 18”x13”width, and three 18”x12” width; +45 mm offset front and rear. New, never used/ fitted. These cost $1000 USD per wheel from factory. Intended for Corvette race car> unfinished project. Will fit many other cars.

Built in March 79 the car now has a Larry Kogge built 13bbp running a 48ida new Spanish type Weber bought from Weber sales agent in Australia set up for a 13bbp. I bought the engine of a guy who always turned it over and kept it oiled up said to have done just over 1000k's. Larry raced touring cars and new his way around rotaries back in the day to my understanding. looking the intake runners id love to see in this engine some more. Series 1 box I believe and and standard rear end to be honest

Brand new Varta A5 Start/Stop AGM Battery (G14) purchased from Every Battery Ashburton on 4 Nov 2025. It has been used for about 2 weeks before we discovered we needed a larger 105Ah battery for our vehicle. The battery is basically brand new but I cannot exchange it at the battery store so I am looking to sell it for a large discount. Originally purchased for $559.95 (receipt in second photo), and it is in warranty with the receipt which can be provided. Selling for $159.95 less than retail p

Brand New 2020 Manufactured Supashock Coilover Suspension Shocks to suit Hyundai Excel These were the last type available before the introduction of the controlled shock package for Circuit Excel They have been bolted onto a car but have never been used

Up for sale is my 1996 Subaru GC8 rolling shell. Car present well as a good base for someone wanting to convert into circuit racing or rally car. Currently sitting under the lightweight composite bonnet is a 1.8ltr na motor with no gearbox. I do have a gearbox to put into it which will come with the purchase. along with all the drivetrain and brand new DBA T3 rotors and pads. The car is sitting Pedder Extreme coilovers, later model front hubs and larger 17" rims with Toyo semi slicks which have

Race Ready AMG GT4 - competed in the 2025 Monochrome GT4 Series - no work needed to Join the 2026 season This is Love Racing's Second example of the AMG Gt4 - it has been looked after by Team Soutar Motorsport throughout the 2025 season Odometer: 9,820km Items included in sale: Extra set of Rim’s ($8,000) Engine Lifting mount Live Data Modul, with BOP sensors needed for GT4 Australia ($6,600) Modem to send Data to Wall + Sim ($2,200) Dorian time system needed for GT4 Australia ($2,300) Radio

* EXPRESSION OF INTEREST * (Regretful Sale) Go Endurance Racing with your mates at an affordable level like the Bathurst 6hr. TOYOTA COROLLA SPORTIVO ZZE123 Motec 400 with Motec Dash, fresh NTE build 2ZZ 1.8 DOHC, 6 spd Cusco LSD G/box MCA Gold full adjustable Coil Overs, Dry brake refueling system, surge tank, Fabraications 6 point Hybrid Roll Cage, In car radio kit & Dorian ** LARGE TANDAM TRAILER ** with pull out ramps Spares Package - Complete NTE built 2ZZ with 6 spd KAAZ LSD G/box &

Holden VE SS-Z Ute – HPF Stage 5 Build (minus exhaust) – Under 1,000 km Since Build This is one of the cleanest, tightest VE SS-Zs you’ll find — freshly built, barely driven, and ready for its next owner who knows quality. The HPF Stage 5 package (minus exhaust) has just been completed and done under 1,000 km, making this essentially a new high-performance setup that’s still crisp, strong, and unspoiled. Performance & Upgrades HPF Stage 5 package (minus exhaust) — completed by Horsepowe

Brembo 8 pot calipers/ 380mm discs & pads front; 4 pot calipers/350mm discs & pads rear, with Chev hats ( easily changed for other application). New / never used. Unfinished race car project.

NEW 2025 HNS 6.5m Enclosed Tri axle Internal floor length is 6.45m trailer external full width is 2495mm width between mudguards is 2005mm drawbar length is 1.5m internal height is 2.2m GVM 4500kg Tare 1950kg Chassis and drawbar at 150mm x 50mm x 5mm X 450gr RHS duragal Steel 4mm Automotive spec Aluminum Cladding walls, high gloss white (flexible core) 1pc fiberglass FRP roof LED autolamps tail lights and clearance lights throughout the entire trailer load sharing greaseable suspension ( 620

This Nissan LZ 20 B Works Engine is in parts ready to be assembled. All of the respective parts are in excellent order and are all original Nissan works components. For example, the twin cam head has been fully refurbished by an engineer who is well known for working with rare and historic competition engines. There are numerous photos of the engine and its parts, only a few have been listed. Further photos can be emailed. This is a rare opportunity for an enthusiast or collector who is look

1990 VR4 built by Jamie Drummond to group A specs. Rallied by Graham Alexander in the ARC 1990-1997. Upgraded to EVO specs, Group A brakes, bigger drive shafts, green front hubs, front LSD, 80 litre fuel tank, Albins dog gearbox. Maintained regardless of cost. Current log book. Multiple spares. Had major rebuild early 2000’s @ $50k only done 3 events since. Call 0418521309