367 items with Roll Cage for sale

1963 FORD CORTINA MkI 440 SN:4497 REG:HOT063 VIN:120E24626M ENG:120E24326 $29,500 (To be sold Unregistered, without RWC) WELL PREPARED TARMAC RALLY COMPETITOR Built by ‘James Young Race Engines’ of Melbourne in 2003, this MkI Cortina has seen regular, and spirited use on the tarmac rally scene, with the race log books (CAMS & AASA) showing 12 events run between 2006 and 2024, including Targa Tasmania in both 2007 and 2017. The detailed invoice history accompanying the Ford shows major

2021 - TA2 - Transam TFH Racing Mustang For Sale. 2nd in TA2 2025 Championship with Ben Gomersall and TFH Racing. Won the TA2 2024 Championship with Josh Haynes. This TA2 / Transam comes with a G-Force Gearbox with upgraded light weight flywheel, Tilton Triple plate Clutch, Racetech seat and belts, Upgraded Wilwood Brake Pedal. Highly maintained by TFH Racing. Wilwood Brake Rotors and Pads comes with spares below, 1x set of Hoosier Wets with Rims. 1x set of Howe Jack Stand. 1x set of Wheel Hub

Lotus Elan Series 2 DHC. Car has had the following work recently completed, twim cam engine and head rebuilt. Gearbox and diff fully rebuilt also. New solid rear drive shaft conversion installed along with new front suspension bushes and rebuilt steering rack. Rear hubs rebuilt and uprights fitted with new adjustable Spaz shocks. Also included is a 26R body kit. Power unit requires installation. Selling as I have too many Elans. Located in Brisbane.

1969 Porsche 911 E, coupe (non sunroof) 2.0L MFI in it's original factory colour of 'Irish Green'. I purchased this car as an extensively prepared front running Group S historic race car and have continued to further develop it both mechanically and cosmetically. Body: Original 1969 LWB narrow body early 911. Ex US car, LHD. Bonnet, rear decklid & lower valances all freshly repainted. Glass front windscreen, plexiglass to side & rear windows. Fibreglass front & rear bumpers (originals included

Your chance at owning the next best thing to an Ariel Atom, for a fraction of the cost. The Rocket is a consummate performer with attractive exoskeletal styling for a driving experience unlike any other. Very well made, with amazing handling in this quick car. 2016 build, only done 3300 km's Road registered with full engineering approval. Currently QLD rego 1.8 litre ZETEC motor. Very responsive MEV is a UK kitcar manufacturer. You can still buy the kits , but its a lot of time and $$. S

2004 Porsche 996 GT3 Cup Car – Race Ready Trade option: May consider trade for Porsche GT road car (GT3, GT3 RS, GT4 etc) with adjustment either way. For sale is a well-presented Porsche 996 GT3 Cup Car finished in iconic Martini Racing livery. Powered by the legendary 3.6L Mezger engine paired with a 6-speed manual gearbox, the 996 Cup cars are widely regarded as one of the most rewarding and affordable Porsche race cars to own and maintain. This car presents and drives very well, has been

RUEA I designed, built, raced and developed with the intention of making kit cars and selling but my age has put an end to that ....Engine V6 Camry 240hp Transmission MR2 Body fibreglass. Chassis space frame and carbon fibre. Total weight approx.1095kg getting about 170kmh end of straight at Lakeside. I believe if it gets engineering compliance may be registed ??? For more info and photos please feel free to call: David 0439761214

1996 WRX Log Booked Race Car new motor from subaru STI worked heads, large sump GFE .Motor would be lucky if its done 15 hours Autronic EVL,LDI Ignition ,watre sprayers boost regulator and surge tank 4 pot brakes, braided lines,Race Pads 6 point roll cage cams aproved,Race tech seat ,6 point harness and log booked 17" slicks with 2 spares PAR gearbox Ajustable coilovers,cusco shocks and ajustable white line sway bar fresh profestional paint job ready for sponser decals

MY23 Porsche 992 GT3 Cup Car, delivered new to Porsche Carrera Cup Australia for the 2024 season. The car has been meticulously maintained by Earl Bamber Motorsport since its arrival in Australia. The car received a new chassis in October 2025 and has since only covered 15km at a shakedown event. The engine and gearbox have covered 44.5 hours / 7020 km since new. The car comes with a full life schedule from delivery. Expiration dates: - Belts end 2028, - Seat end 2031, - Window nets end 2028

2x Nissan 350Z with TESLA running gear. Selling $30k each or $50k for the pair Need work. One was running but hasn't been charged for 4yrs. So might need work. Open to serious offer Add will be upgraded when i find out more details. They were used in Maccau casino with an Australian stunt driver called Captain Kangaroo. https://www.youtube.com/watch?v=J7DAYsl9740

Reduced from $175,000, now down to $150,000 As raced by Craig Scutella at Bathurst 6 hour. New HCC engine (2 races only) Brand new Holinger gearbox and Tilton clutch, Zero hours on both. Diff one race old. All recent updates performed, engine oil cooler relocation, new and relocated gearbox cooler, radios, HD vbox, huge inventory of parts. Rims, shocks, springs, gear sets etc. Please ring to discuss spare parts plus any setup and track support if required.

MY17 Porsche 911 991.2 GT3 Cup Car, originally delivered and raced in Porsche Carrera Cup Asia season in 2018. Imported into Australia in 2021 and debuted in the 2022 Porsche Michelin Sprint Challenge season with Ryan Wood as the Team Porsche New Zealand x Earl Bamber Motorsport Scholarship car. The car received a new chassis and engine for the start of the 2024 season and has since covered 6668km / 43 hours. The gearbox underwent a major service at Holinger in June 2025 and has since covered 1

Just finished a ground up referb including panel & paint outside, inside & underneath. Price also includes a comprehensive Spares Package valued at over $10,000. ENGINE SPEC’s: Engine completely refreshed by Blaze Performance. Block- Sunnen CK21 Torque plate honed and plateau finished Callies Magnum XL Crankshaft cleaned, polished & crack tested Callies Ultra ɪ Beam 6” Rods cleaner & crack tested JE Custom Forged Pistons sonic cleaned to remove carbon from gas ports New Total Seal Rings File

PRICE UPDATE: Now $33k Ready to race, sprint or hillclimb with a dual axle trailer! Sadly, it is time to sell my beautiful Mallock Mk31 clubman sports racer as my time circuit racing has come to an end. This is an English car built in the Mallock factory and is chassis No.1. It was completed shortly after Arthur Mallocks’ passing and was the first car by Mallock to be CAD. The car comes with a dual axle custom made trailer and many spares. It has a fully documented log book and has had a long

1992 Daihatsu Charade Ultra racing supports top and bottom of rear struts & top of front struts and fender braces New Haltech Elite 750 ECU cost $7400 Adjustable coil overs front & rear 4-wheel disc brakes CAMS approved roll cage built by Scott's Rods 1300cc 16 valve EFI Daihatsu engine Quick release steering wheel Braded brake lines Federal 595RS-R tyres Window net Sparco race seats x 2 5 x 15-inch wheels 4 x steel 13-inch wheels SPARE PARTS AT EXTRA COST $1500 2 X Daihatsu complete cars 1 x p

TOYOTA 86 Scholarship Series Car Currently specced for the 2026 series! Coilovers near new, only being replaced half way through last years season (used 3 rounds) BRAND NEW Engine, been professionally put in by P&K Racepreps (used 1 round) 1 set of spare wheels Race Log Book Complete

Offered for sale is this striking 1970 Fiat 124BC Coupe, purpose-built for motorsport and with a considerable history across multiple grassroots and competitive disciplines. This lightweight, stripped-out example has been actively campaigned in hill climbs, timed sprints, motorkhana, and more recently in social GEAR events at Lakeside, Queensland Raceway, and Morgan Park. It has also travelled interstate to compete at Fiat Nationals, most recently at The Bend Motorsport Park in South Australia.

2009 Mitsubishi Evo 10. Tarmac Rally weapon! Multiple ATR round winner and 2021 Targa High Country outright winner. Fresh engine 500+ HP, Intense 56/56 stock frame turbo, Motec M800 with launch and knock control, Motec dash, Reiger suspension, ABS, Radium fuel system, AEM intake, Tilton twin plate clutch, ten 18x10 wheels with Yokohama tyres, Plazmaman intercooler, PWR radiator, AP calipers with Brypar 378mm rotors, Ralliart Super Traction LSD's, decent spares package. Motorsport Australia and

Ready to race Mk1 Group NC 1600 BDA fully built with all the good bits. I only used as a track car so has not been raced for a few years. Last owner competed in NC races. Great car nothing to do apart from std race maintenance as usual. Log Booked Can be seen in Somerville.

SOLD-IPRA 2002 V2 Monaro VIC #21-SOLD We have recently retired and are setting off on the Big Lap. It is sadly now time to let go of my IPRA V2 Monaro that I have owned since 2012 and bought as a road car. The V2 Monaro has been built up over many years and a large amount of time and effort has been put into the Monaro to bring it to where it is today. Under the guidance of Maverick Performance I have sourced the best components and motorsport engineers and fabricators. https://www.facebook.